1

Uart Jobs (NOW HIRING)

Senior Embedded Software Engineer

Newark, DE

$121K - $158K/yr

Develop and debug software interfaces for hardware peripherals using protocols such as I2C, SPI, UART, USB, CAN, and Ethernet. * Work within an Agile/Scrum/Continuous Integration environment to ...

Senior Embedded Software Engineer

Newark, DE · On-site

$121K - $158K/yr

Develop and debug software interfaces for hardware peripherals using protocols such as I2C, SPI, UART, USB, CAN, and Ethernet. * Work within an Agile/Scrum/Continuous Integration environment to ...

Software Engineer

Schaumburg, IL · On-site

$55 - $70/hr

Develop, extend, and harden Device Abstraction Layer drivers for STM32G474, including SPI, I2C, USB, UART, GPIO, timers, and DMA. * Extend and enhance the USB stack to support CCID and related ...

... UART, SPI, or similar interfaces • Re-flash or recover devices, including those in non-functional ("bricked") states • Perform low-level hardware work such as chip removal/de-soldering when ...

Develop firmware to interface with server hardware components, including sensors (voltage, temperature, fan speed), power supplies, and peripherals, using protocols such as I²C, SPI, and UART.

FPGA Design Engineer

Melbourne, FL · On-site

$114K - $157K/yr

Experience with high-speed interfaces including PCIe, Ethernet, DDR, SPI, I2C, UART, or JESD204. * Familiarity with embedded processors (ARM, MicroBlaze, Nios II, etc.) is preferred. * Experience ...

Embedded Software Engineer

Irvine, CA · On-site

$141K - $185K/yr

Familiar with common serial communications interfaces including UART and USB Familiar with common lab equipment including oscilloscopes, spectrum analyzers, power supplies, signal generators, etc.

Senior Firmware Engineer

New York, NY · On-site

$160K - $200K/yr

Integrate biometric and environmental sensors via SPI, I2C, UART, GPIO, DMA, and interrupt-driven designs. * Optimize firmware performance, memory usage, latency, and reliability. * Lead board bring ...

New

Principal Embedded Firmware Engineer

Houston, TX · On-site

$98K - $134K/yr

Development of wireless and wired communication interfaces (BLE, UART, I2C, USB, NFC) * Cybersecurity implementation and FOTA update strategies * Risk assessment, technical planning, and lifecycle ...

Principal Embedded Firmware Engineer

Houston, TX · On-site

$98K - $134K/yr

Development of wireless and wired communication interfaces (BLE, UART, I2C, USB, NFC) * Cybersecurity implementation and FOTA update strategies * Risk assessment, technical planning, and lifecycle ...

next page

Showing results 1-20

Uart information

See salary details

$51K

$98.3K

$164K

How much do uart jobs pay per year?

As of Jul 23, 2026, the average yearly pay for uart in the United States is $98,329.00, according to ZipRecruiter salary data. Most workers in this role earn between $67,500.00 and $122,000.00 per year, depending on experience, location, and employer.

What are jobs that start with R?

Jobs that start with R include roles such as Radiologic Technologist, Research Scientist, and Receptionist. These positions often require specific skills, certifications, or experience, and can be found across various industries including healthcare, research, and customer service.

What is the difference between Uart vs Network Technician?

AspectUartNetwork Technician
Required CertificationsFCC, CE, or industry-specific certificationsCompTIA Network+, Cisco CCNA, or similar
Work EnvironmentManufacturing plants, electronics labs, or field installationsOffice settings, data centers, or client sites
Industry UsageElectronics manufacturing, telecommunications, aerospaceIT, telecommunications, networking companies

Uart technicians focus on serial communication interfaces and electronics hardware, often working in manufacturing or electronics environments. Network Technicians specialize in network infrastructure, troubleshooting, and configuration. While both roles require technical certifications and involve working with communication systems, Uart roles are more hardware and electronics-oriented, whereas Network Technicians focus on data networks and connectivity.

What are examples of routine jobs?

Routine jobs for a Uart role typically include tasks such as data entry, equipment maintenance, monitoring systems, and performing scheduled inspections. These jobs often require attention to detail, basic technical skills, and adherence to established procedures. They are usually performed on a regular schedule to ensure smooth operations.

What are ftp jobs?

FTP jobs typically refer to positions involving File Transfer Protocol (FTP) tasks, such as managing file transfers between servers and clients. These roles often require knowledge of network protocols, server management, and sometimes scripting or automation skills. They are common in IT, web development, and system administration environments.
More about Uart jobs
What cities are hiring for Uart jobs? Cities with the most Uart job openings:
What states have the most Uart jobs? States with the most job openings for Uart jobs include:
Infographic showing various Uart job openings in the United States as of July 2026, with employment types broken down into 94% Full Time, 1% Part Time, and 5% Contract. Highlights an 95% Physical, 3% Hybrid, and 2% Remote job distribution, with an average salary of $98,329 per year, or $47.3 per hour.
Senior Embedded Software Engineer

Senior Embedded Software Engineer

Hologic Inc.

Newark, DE

$121K - $158K/yr

Full-time

Posted 19 days ago


Hologic rating

8.0

Company rating: 8.0 out of 10

Based on 25 frontline employees who took The Breakroom Quiz

152nd of 433 rated machine equipment manufacturers


Job description

We're looking for a Senior Embedded Software Engineer to design, develop, and maintain embedded software for our next-generation breast and skeletal health systems. In addition to core embedded software development, this role requires hands-on experience with low-level embedded software development, including driver-level design, implementation, and testing, as well as board bring-up activities. The engineer will work closely with hardware teams to interface with peripherals and ensure reliable system operation using communication protocols such as I2C, SPI, UART, USB, CAN, and Ethernet. This role is based out of Newark, DE and will require onsite presence.

What You'll Do

  • Develop an expert-level understanding of our products and how they're used in clinical practice.
  • Design, implement, and validate low-level device drivers for embedded platforms.
  • Perform board bring-up activities, including hardware/software integration, debugging, and validation on new hardware platforms.
  • Develop and debug software interfaces for hardware peripherals using protocols such as I2C, SPI, UART, USB, CAN, and Ethernet.
  • Work within an Agile/Scrum/Continuous Integration environment to deliver reliable, production-ready code.
  • Contribute to technical documentation, including requirements, design specifications, and release notes.
  • Identify, design, and implement appropriate software testing; collaborate closely with Test Engineers to support verification and validation.
  • Diagnose, prioritize, and resolve complex technical issues; analyze defects and drive process improvements.
  • Serve as a technical leader on the team-mentoring junior engineers, promoting best practices, and insisting on high standards for quality and usability.
  • Partner with Product Management and domain experts to define product improvements and new features.
  • Perform software risk assessments (e.g., FMEAs) and help develop appropriate mitigations at the component, subsystem, and system levels.
  • Stay current with emerging technologies and propose opportunities for product and process improvements.
  • Train cross-functional teams on key product design elements and proper usage where needed.

What We're Looking For

Education

  • Bachelor's or Master's degree in a relevant technical field (e.g., Computer Engineering, Electrical Engineering, Computer Science, or similar).

Experience

  • 8+ years of experience with a Bachelor's degree. 
  • Experience developing complex, multi-component systems, including RTOS and/or embedded controllers.
  • Strong computer science foundation, including operating systems, software systems, data structures, algorithms, and networking.

Technical Skills

  • Hands-on experience with low-level embedded software development, including device driver design, implementation, and testing.
  • Experience with board bring-up, hardware/software integration, and debugging on new hardware platforms.
  • Strong experience interfacing with hardware using communication protocols such as I2C, SPI, UART, USB, CAN, and Ethernet.
  • Expert-level programming skills in C/C++ in an embedded environment; assembler-level experience is a plus.
  • Demonstrated mastery of software design principles, data structures, design patterns, and multithreading.
  • Ability to architect complex software systems to meet functional and performance requirements while maintaining long-term maintainability.
  • Ability to read and interpret circuit diagrams to identify control signals and processor inputs.
  • Strong debugging skills and experience resolving complex issues in embedded systems.
  • Comfortable working with technical documentation (requirements, design documents, release notes, etc.).
  • Experience conducting and participating in thorough code reviews.
  • Strong familiarity with developer tools: version control, CI/CD build pipelines, and issue/project tracking tools.

Soft Skills

  • Excellent written and verbal communication skills, including the ability to explain complex technical topics to both technical and non-technical stakeholders.
  • Able to adapt communication style to different audiences and collaborate effectively within a cross-functional team.
  • Demonstrated ownership of deliverables, with a track record of meeting project timelines.
  • Strong awareness of both local and system-level impact of code changes.
  • Proven ability to champion best practices and contribute to continuous improvement in processes and products.

Nice-to-Have

  • Experience in the medical device industry.
  • Experience with medical imaging or general image processing.
  • Familiarity with DICOM and/or HL7 standards.
  • Experience with secure coding principles or cybersecurity.

So why join Hologic?

We are committed to making Hologic the company where top talent comes to grow. For you to succeed, we want to enable you with the tools and knowledge required and so we provide comprehensive training when you join as well as continued development and training throughout your career. We offer a competitive salary and annual bonus scheme, one of our talent partners can discuss this in more detail with you.

The annualized base salary range for this role is $106,500 - $166,600 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, geography, education, business needs and market demand.

Agency and Third-Party Recruiter Notice: Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered.

As part of our commitment to a fair and accurate evaluation of each candidate's qualifications, we require all applicants to refrain from using AI tools, such as generative AI or automated writing assistance, during any stage of the interview process. Responses influenced by AI may result in disqualification. We appreciate your understanding and cooperation in ensuring a transparent and equitable selection process.

Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans.

#LI-DS1

#onsite


What Hologic employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom