ZipRecruiter

Log In

1

Tripac Jobs (NOW HIRING)

trane technologies

Assembler (Tripac)

Hastings, NE · On-site

$18.50/hr

Be a part of our mission! As a world leader in creating comfortable, sustainable, and efficient climate solutions for buildings, homes and transportation, it's our responsibility to put the planet ...

Trane Technologies plc

Assembler (Tripac)

Hastings, NE · On-site

$18.50/hr

Be a part of our mission! As a world leader in creating comfortable, sustainable, and efficient climate solutions for buildings, homes and transportation, it's our responsibility to put the planet ...

next page

Showing results 1-20

All JobsTripac Jobs

Tripac information

What are some common challenges faced by Tripac operators in maintaining and troubleshooting auxiliary power units (APUs)?

Tripac operators often encounter challenges such as diagnosing electrical or mechanical faults in APUs, especially when dealing with intermittent issues that may not always present clear error codes. Another common challenge is performing routine maintenance in variable weather conditions or on tight schedules, which requires strong attention to detail and safety protocols. Additionally, effective communication with drivers and fleet managers is crucial to ensure APUs are serviced promptly, minimizing vehicle downtime. Staying updated with the latest manufacturer guidelines and technical bulletins also helps operators address issues efficiently.

What is the difference between Tripac vs HVAC Technician?

AspectTripacHVAC Technician
Required CertificationsTripac certification, possibly HVAC-relatedEPA 608, HVAC certifications
Work EnvironmentSpecialized in tripac systems, often in commercial settingsResidential and commercial HVAC systems
Industry UsageUsed in industries with tripac systemsCommon in HVAC industry
Job FocusMaintaining and repairing tripac systemsInstalling, maintaining, repairing HVAC units

Tripac and HVAC Technician roles share certifications and work environments related to climate control systems. However, Tripac specialists focus specifically on tripac systems, often in commercial settings, while HVAC Technicians handle a broader range of heating, ventilation, and air conditioning systems. Understanding these differences helps job seekers target the right roles in the industry.

What are Tripac technicians?

Tripac technicians are specialized professionals who install, maintain, and repair Tripac Auxiliary Power Units (APUs) on trucks. These APUs are designed to provide heating, cooling, and electrical power to trucks when the main engine is off, helping save fuel and comply with anti-idling regulations. Tripac technicians are skilled in electrical systems, HVAC, and diesel technology, ensuring the proper functioning and safety of the APU units. They often work at trucking companies, repair shops, or as mobile service providers, supporting fleet operations and driver comfort.

What are the key skills and qualifications needed to thrive as a TriPac Technician, and why are they important?

To thrive as a TriPac Technician, strong mechanical aptitude, knowledge of diesel engines, and a background in HVAC systems are essential, often supported by technical certifications or relevant vocational training. Familiarity with diagnostic tools, maintenance software, and Thermo King TriPac APU systems is typically required. Attention to detail, problem-solving abilities, and effective communication skills help technicians excel in troubleshooting and servicing complex units. These skills ensure reliable performance, minimize equipment downtime, and support customer satisfaction in the transportation industry.
More about Tripac jobs
What cities are hiring for Tripac jobs? Cities with the most Tripac job openings:
What states have the most Tripac jobs? States with the most job openings for Tripac jobs include:
What job categories do people searching Tripac jobs look for? The top searched job categories for Tripac jobs are:
Tripac jobs near you
Infographic showing various Tripac job openings in the United States as of June 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution.
Refrigeration Technician Apprentice

Refrigeration Technician Apprentice

Kirby Corporation

Commerce City, CO • On-site

$22/hr

Full-time

Medical, Dental, Vision, Life, PTO

Posted 12 days ago

Job description

Overview

Thermo King of Dallas is Now Hiring a Refrigeration Technician Apprentice at 5170 East 58th Place, Commerce City, CO 80022. Apprentice Refrigeration technicians are responsible for installing, maintenance, troubleshooting, and repairing Thermo King reefer units, auxiliary power units (APUs), and heating units.

Responsibilities
  • Perform preventive maintenance (PM) on trailer equipment (A & B).
  • Replace or reinstall fuel filters, prime fuel systems, and start trailer equipment.
  • Replace, reinstall, or clean EGR valves on trailer equipment.
  • Replace, reinstall, or change belt tension on trailer equipment.
  • Replace or reinstall batteries on trailer equipment.
  • Perform preventive maintenance (PM) on truck equipment (A & B).
  • Install new units on truck equipment.
  • Replace or reinstall alternators on truck equipment.
  • Replace or reinstall water pumps on truck equipment.
  • Perform preventive maintenance (PM) on Tripac (A&B).
  • Install new Tripac APUs.
  • Replace or reinstall alternators on truck equipment.
  • Perform preventive maintenance (PM) on Espar equipment.
  • Replace or reinstall fuel pumps on trailer equipment.
  • Replace or reinstall alternators on trailer equipment.
  • Replace or reinstall starters on trailer equipment.
  • Replace or reinstall water pumps on trailer equipment.
  • Install new units on trailer equipment.
  • Replace or reinstall fuel pumps on trailer equipment.
  • Replace or reinstall fuel filters, prime fuel systems, and start truck equipment.
  • Replace or reinstall starters on truck equipment.
  • Replace, reinstall, or change belt tension on truck equipment.
  • Replace or reinstall batteries on truck equipment.
  • Replace or reinstall water pumps on Tripac APUs.
  • Replace or reinstall fuel pumps on Tripac APUs.
  • Replace or reinstall fuel filters, prime fuel systems, and start Tripac equipment.
  • Replace or reinstall starters on Tripac APUs.
  • Replace or reinstall heater burners on Espar Equipment.
  • Install Espar equipment.
  • Install TracKing on equipment.
  • Solder parts.
  • Use the Asset Library portal to search for manuals, software, customer lists, and labor guides.
Qualifications

Competencies:

  • To perform the job successfully, an individual should demonstrate the following competencies:
  • Basic mechanical knowledge & skills preferred.
  • Basic knowledge of 4-cycle engines preferred.
  • Basic knowledge of Ohm's Law preferred.
  • Basic knowledge of electricity and 12-volt direct current (DC) preferred.
  • Ability to use a variety of hand and power-operated tools and equipment, such as welding and oxy/acetylene cutting/brazing equipment, refrigeration gauge assemblies, engine diagnostic tools, AC/DC multimeters, micrometers and other measuring tools as needed to complete assigned jobs.
  • Must possess skills necessary to use computer diagnostic equipment.
  • Must maintain Forklift Certification License (Training and Certification provided by employer).
  • Ability to read electrical and refrigeration schematics.
  • Ability to solder parts.

Education/Experience:

  • High School Diploma or GED required.
  • 0 - 2 years of trade school or equivalent experience preferred.
  • Must have or acquire tools needed for this position.
  • Must have the ability to maintain a forklift license.
  • Must possess a valid driver license and the ability to operate motor vehicles for test purposes.

Performance Requirements

  • Work safely 100% of the time.
  • Maintain a minimum of 21% productivity.
  • Perform oil changes within 15 minutes.
  • Maintain an attendance percentage of 97% or better.
  • Maintain less than 2 timekeeping errors per month.
  • Work overtime, as required.

Physical Demands:

  • Physical strength and ability to perform moderate to heavy manual labor, including frequent bending, walking, and heavy lifting, for extended periods under dirty and uncomfortable conditions and in all types of weather as necessary.
  • Able to stand for extended periods of time and able to climb ladders or steps/stairs to get to equipment.
  • Exerts up to 50 lbs of force frequently. Able to lift 65 pounds from floor to shoulder height occasionally.
  • Ability to frequently exert the pound force limits for push/pull 50lb f (no wheels) or 100lb f (wheels)
  • Must be able to drive service vehicle at least 80 continuous miles.
  • Will be required on occasion to work more than 8 hours on shift.
  • Requires frequent bending, stooping, kneeling, crouching, crawling, climbing, balancing, lifting, carrying, and reaching or handling with arms, hands, and fingers, working in narrow spaces.
  • Requires frequent repetitive movements, i.e. hammering, turning wrenches, or use of screwdrivers.
  • Must also follow up and keep up with any changes in Certification level added by Thermo King Corp.
  • Manual dexterity sufficient to work with fingers.
  • Normal vision with or without corrective lenses.
  • Working in the vicinity of hazardous, flammable materials and solvents and engine exhaust fumes, along with refrigeration.

Starting pay rate is $22.00 per hour.  Thermo King of Dallas LLC offers a comprehensive benefit package, that includes medical, dental, vision and life insurance.  Plus, vacation, sick time, and holiday pay.

Employment Type: FULL_TIME

Apply