ZipRecruiter

Log In

1

Transformer Testing Jobs in Louisiana (NOW HIRING)

Crane 1 Services

Be Seen First

Electric Controls Technician

Houma, LA · On-site

$35 - $45/hr

  • Medical

  • Dental

  • Vision

  • Life

  • PTO

Diagnose issues with motor controls, VFDs, contactors, relays, transformers, fuses, overloads ... Testing, Commissioning, and Quality Control * Perform electrical inspections before crane testing ...

Crane 1

Electric Controls Technician

Houma, LA · On-site

$35 - $45/hr

Diagnose issues with motor controls, VFDs, contactors, relays, transformers, fuses, overloads ... Testing, Commissioning, and Quality Control * Perform electrical inspections before crane testing ...

Career Search

Field Technician - Lake Charles

Sulphur, LA · On-site

$18 - $24.50/hr

This role performs electrical testing and commissioning of, but not limited to, testing and ... Current and potential transformers * Power Cables * Grounding * Station Batteries and Chargers

DSC Dredge

Electrical Quality Assurance Specialist

Reserve, LA · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Inspect and participate in testing of electrical equipment -- switchgear, transformers, motors, control panels, and conduit/cable systems for conformance with drawings, schematics, specifications ...

DSC Dredge

Electrical Quality Assurance Specialist

Reserve, LA · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Inspect and participate in testing of electrical equipment -- switchgear, transformers, motors, control panels, and conduit/cable systems for conformance with drawings, schematics, specifications ...

MCG Workforce

Electrician

Houma, LA · On-site

$22.75 - $31.25/hr

Inspect transformers and circuit breakers and other electrical components. Troubleshoot electrical issues using appropriate of testing devices. Repair and replace equipment, electrical wiring, or ...

ISC Constructors

Electrician

Norco, LA · On-site

$27.50 - $35.50/hr

Able to terminate motors, transformers, stress cones and cable splicing * Understand the proper use ... M., AMP meter and 1000-volt insulation tester * Knowledgeable in communication and applicable ...

Bergelectric

Apprentice Electrician

Shreveport, LA

Responsibilities * Assist with the installation, repair, maintenance and testing of commercial ... Knowledge of magnetic induction, three-phase transformers, conductors and wiring methods. * The ...

Bergelectric

Apprentice Electrician

Shreveport, LA

Responsibilities * Assist with the installation, repair, maintenance and testing of commercial ... Knowledge of magnetic induction, three-phase transformers, conductors and wiring methods. * The ...

M.C. Dean, Inc

Commissioning Engineer Staff

Monroe, LA · On-site

The Commissioning Engineer team is responsible for performing final testing, startup, and commissioning of low and medium voltage electrical distribution equipment, including breakers, transformers ...

Siemens

Senior Systems Inspector - Fire Alarm

New Orleans, LA · On-site

$19.75 - $25.75/hr

Transform the everyday with us! Fire Inspectors play a vital role in preventing, detecting, and ... You will perform tasks such as minor repairs and visual and functional testing on fire alarm ...

Dow

Senior Relay Technician

Hahnville, LA · On-site

  • Medical

  • Life

  • Retirement

  • PTO

Working knowledge of current transformers (CT) and voltage/potential transformers (VT/PT) circuits and advanced relaying circuits. * Working knowledge on relay testing (electromechanical, solid state ...

ISC Constructors

Maintenance Electrician

Geismar, LA · On-site

$29.75 - $38.25/hr

Able to terminate motors, transformers, stress cones and cable splicing * Understand the proper use ... M., AMP meter and 1000-volt insulation tester * Knowledgeable in communication and applicable ...

ISC Constructors

Electrician

Garyville, LA · On-site

$25.75 - $33.25/hr

Able to terminate motors, transformers, stress cones and cable splicing * Understand the proper use ... M., AMP meter and 1000-volt insulation tester * Knowledgeable in communication and applicable ...

New

previous page

Showing results 41-60

All JobsTransformer Testing JobsTransformer Testing Jobs in Louisiana

Transformer Testing information

What is a transformer testing?

A Transformer Testing job involves inspecting, evaluating, and ensuring the proper functioning of electrical transformers. This includes testing parameters like insulation resistance, winding resistance, turns ratio, and oil quality to identify faults or inefficiencies. Professionals in this role use specialized equipment and follow industry standards to maintain transformer reliability. They may work in manufacturing, power plants, or service companies to ensure transformers operate safely and efficiently.

What are the typical daily responsibilities of someone working in transformer testing?

Professionals in Transformer Testing typically spend their days performing electrical tests on new, repaired, or in-service transformers to assess their health and ensure compliance with industry standards. Their work includes setting up test equipment, recording and interpreting test data, and troubleshooting any detected issues. Collaboration with engineers, maintenance personnel, and safety teams is common to coordinate testing schedules and report findings. Additionally, they may be responsible for preparing detailed test reports and recommending corrective actions if potential faults are identified. This role offers a dynamic mix of hands-on technical tasks and teamwork, ideal for those who enjoy problem-solving and working in industrial or power utility environments.

What are the key skills and qualifications needed to thrive in transformer testing, and why are they important?

Excelling in Transformer Testing requires a strong background in electrical engineering, knowledge of transformer operations, and hands-on experience with diagnostic and testing procedures. Familiarity with testing equipment such as insulation resistance testers, turns ratio testers, and adherence to industry standards like IEC or IEEE is essential, and certifications in electrical safety or high-voltage testing are often preferred. Attention to detail, strong problem-solving abilities, and effective communication skills help professionals identify faults and work collaboratively with maintenance or engineering teams. These competencies are crucial for ensuring transformer reliability, safety, and compliance with industry and regulatory requirements.

How much do transformer testers make?

Transformer testers typically earn between $50,000 and $80,000 annually, depending on experience, certifications, and location. Entry-level positions may start lower, while experienced technicians with specialized skills can earn higher salaries, especially if working overtime or in industrial environments.

What are popular job titles related to Transformer Testing jobs in Louisiana?

For Transformer Testing jobs in Louisiana, the most frequently searched job titles are:

What job categories do people searching Transformer Testing jobs in Louisiana look for?

The top searched job categories for Transformer Testing jobs in Louisiana are:

Transformer Testing jobs near you
Infographic showing various Transformer Testing job openings in Louisiana as of August 2026, with employment types broken down into 2% As Needed, 89% Full Time, 6% Part Time, and 3% Contract. Highlights an 98% In-person, and 2% Remote job distribution.

Electric Controls Technician

Crane 1 Services, Inc.

Houma, LA • On-site

$35 - $45/hr

Full-time

Re-posted 10 days ago

Job description

The Overhead Crane Electrical Controls Technician is responsible for installing, troubleshooting, repairing, testing, and commissioning electrical control systems used on overhead cranes, hoists, runway systems, and related material-handling equipment. This position requires strong electrical knowledge, hands-on troubleshooting ability, and a solid understanding of crane controls, motor circuits, VFDs, contactors, relays, limit switches, pendant controls, radio controls, festoon systems, and safety devices.
The ideal candidate will be able to read electrical schematics, diagnose control issues, perform wiring and terminations, support crane manufacturing and field service needs, and ensure all electrical work meets company quality standards, customer requirements, and applicable safety codes.
Pay: $35/hr - $45/hr
Key ResponsibilitiesElectrical Installation and Wiring
  • Install, wire, and terminate electrical components on overhead cranes, hoists, end trucks, control panels, runway electrification, and below-the-hook equipment.
  • Wire pendant controls, radio controls, variable frequency drives, contactors, relays, transformers, disconnects, limit switches, overload devices, braking systems, and safety circuits.
  • Install and troubleshoot festoon systems, conductor bar systems, cable reels, junction boxes, and crane power distribution systems.
  • Route, secure, and label electrical wiring in a clean, professional, and serviceable manner.
  • Perform conduit, cable tray, cable management, and control wiring installation as required.
  • Ensure wiring is completed according to electrical drawings, schematics, customer specifications, and company standards.
Controls Troubleshooting and Repair
  • Troubleshoot electrical and control system problems on overhead cranes, hoists, trolleys, bridges, and runway systems.
  • Diagnose issues with motor controls, VFDs, contactors, relays, transformers, fuses, overloads, limit switches, encoders, brakes, and control circuits.
  • Identify root causes of electrical failures and recommend corrective actions.
  • Repair or replace faulty electrical components as needed.
  • Test incoming power, control voltage, motor leads, grounding, phase rotation, and circuit continuity.
  • Troubleshoot intermittent electrical issues using meters, schematics, and logical diagnostic methods.
VFD and Motor Control Systems
  • Install, program, and troubleshoot variable frequency drives used for bridge, trolley, and hoist motion.
  • Adjust drive parameters for speed, acceleration, deceleration, braking, ramping, and load control.
  • Verify proper motor rotation, speed control, braking performance, and smooth operation.
  • Troubleshoot drive faults and determine whether issues are caused by programming, wiring, motor problems, load conditions, or failed components.
  • Work with single-speed, two-speed, and variable-speed crane control systems.
Panel Building and Control Assembly
  • Assemble and wire crane control panels according to electrical drawings and panel layout requirements.
  • Mount electrical components including drives, starters, relays, terminal blocks, transformers, breakers, fuses, disconnects, and control devices.
  • Label wiring, terminals, components, and panels clearly and accurately.
  • Perform point-to-point wiring checks and verify control panel accuracy before power-up.
  • Maintain a clean and organized panel layout for future serviceability.
Testing, Commissioning, and Quality Control
  • Perform electrical inspections before crane testing, shipment, or field startup.
  • Support functional testing of bridge, trolley, hoist, pendant, radio, limit switch, and emergency stop systems.
  • Verify all motions operate correctly and safely before equipment release.
  • Test upper/lower limits, travel limits, emergency stops, overloads, brakes, warning devices, and control interlocks.
  • Support load testing, operational testing, and final QC inspections when required.
  • Document test results, deficiencies, repairs, and completed work.
  • Ensure all electrical systems meet company QC requirements before shipment or customer acceptance.
Reading Drawings and Technical Documentation
  • Read and interpret electrical schematics, wiring diagrams, ladder logic, layout drawings, bill of materials, and customer specifications.
  • Identify drawing issues, missing information, incorrect parts, or wiring conflicts and communicate them to supervision or engineering.
  • Follow revisions and ensure the latest approved drawings are being used.
  • Mark up drawings when corrections or field changes are required.
Safety and Compliance
  • Follow all company safety policies, lockout/tagout procedures, electrical safety practices, and PPE requirements.
  • Work safely around energized and de-energized electrical systems.
  • Use proper testing equipment and verify circuits before performing work.
  • Maintain awareness of overhead crane hazards, pinch points, suspended loads, moving equipment, and shop traffic.
  • Support compliance with OSHA, NEC, CMAA, ASME, ANSI, and company safety standards as applicable.
  • Stop work and report unsafe conditions, damaged equipment, or quality concerns immediately.
Manufacturing and Field Support
  • Support crane manufacturing, assembly, testing, troubleshooting, and repair activities in a shop or field environment.
  • Work with welders, fitters, mechanics, production managers, engineers, inspectors, and service technicians to complete crane builds and repairs.
  • Assist with startup and commissioning of cranes at customer sites when required.
  • Provide technical support during crane installation or service calls.
  • Help identify improvements to wiring standards, control layouts, troubleshooting processes, and production efficiency.
Required Skills and Qualifications
  • Strong knowledge of electrical control circuits, motor controls, and industrial wiring.
  • Ability to read and understand electrical schematics and wiring diagrams.
  • Experience with contactors, relays, transformers, overloads, breakers, fuses, disconnects, and terminal blocks.
  • Experience troubleshooting AC motors, brakes, VFDs, pendant controls, radio controls, and limit switches.
  • Ability to use electrical testing equipment including multimeters, clamp meters, continuity testers, and insulation testers.
  • Understanding of 3-phase power, control voltage, grounding, phase rotation, and electrical safety.
  • Ability to perform clean wiring, labeling, terminations, and panel assembly.
  • Strong mechanical aptitude and ability to understand crane movement, hoist operation, and equipment function.
  • Ability to troubleshoot problems logically and work independently with minimal supervision.
  • Good communication skills and ability to work with production, service, engineering, and management teams.
  • Ability to document completed work, test results, and repair findings accurately.
  • Strong attention to detail and commitment to quality workmanship.
Preferred Experience
  • Previous experience working on overhead cranes, hoists, monorails, jib cranes, or material-handling equipment.
  • Experience with crane brands such as Street, R amp;M, Yale, Demag, Harrington, Shaw-Box, CM, or similar.
  • Experience wiring new crane builds in a manufacturing environment.
  • Experience troubleshooting cranes in the field or at customer sites.
  • Experience programming or troubleshooting VFDs.
  • Experience with radio remote systems, pendant stations, anti-collision systems, warning lights, horns, and crane safety devices.
  • Knowledge of NEC, OSHA, CMAA, ASME B30, and industrial electrical standards.
  • Experience with panel building, industrial controls, PLCs, or automation systems.
  • Ability to perform basic mechanical repairs or adjustments on hoists, brakes, gearboxes, and motors
Physical Requirements
  • Ability to stand, walk, bend, kneel, climb, reach, and work in a shop or industrial environment.
  • Ability to lift and carry tools, parts, and electrical components as required.
  • Ability to work from ladders, lifts, platforms, or elevated work areas when needed.
  • Ability to work around overhead cranes, forklifts, welding operations, paint areas, and moving equipment.
  • Must be able to wear required PPE including safety glasses, gloves, steel-toe boots, hearing protection, fall protection, and other job-specific equipment.
  • Ability to work in varying shop or field conditions, including heat, cold, noise, dust, and active production areas.
Success in This Role Looks Like
  • Crane electrical systems are wired correctly the first time.
  • Controls are clean, labeled, organized, and easy to service.
  • Electrical issues are diagnosed quickly and accurately.
  • Cranes pass functional testing and QC inspection before shipment or startup.
  • Safety devices, limit switches, brakes, and emergency stops work properly.
  • Problems are communicated clearly to supervision, engineering, and production.
  • Work is completed safely, professionally, and with minimal rework.
Equal Employment Opportunity (EEO) Statement
Crane 1 Services is an equal opportunity employer. We are committed to creating a diverse and inclusive workplace where all qualified applicants are considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status in accordance with applicable federal, state, and local laws. We believe in fostering a supportive environment where every employee is valued and given the opportunity to succeed.

Apply