1

Temporary Utility Pole Inspector Jobs in Dallas, TX

Perform pre-trip, en-route, and post-trip inspections of trucks, trailers, equipment, load ... axle, pole, reel, flatbed, step deck, or specialized utility trailers. * Experience hauling ...

Manage inspection process from progress inspection to Certificate of Occupancy Pre-Construction ... and temporary utilities * Manage materials and verification * Provide technical expertise ...

Longseamer B

Alvarado, TX · On-site

$19.50 - $25.50/hr

At Sabre Industries, we connect and power America's communities with world-class utility and ... Performs visual inspection of the entire length of each seam to identify areas requiring repair.

Public Works Apprentice- NBPT

Carrollton, TX · On-site

$15.25 - $19.75/hr

Duties also include: patches potholes as temporary or permanent solutions; levels concrete and ... Water Utilities * Performs a wide variety of activities in support of water utility maintenance ...

Showing results 41-60

Temporary Utility Pole Inspector information

See Dallas, TX salary details

$10

$19

$32

How much do temporary utility pole inspector jobs pay per hour?

As of Aug 10, 2026, the average hourly pay for temporary utility pole inspector in Dallas, TX is $19.51, according to ZipRecruiter salary data. Most workers in this role earn between $15.00 and $22.12 per hour, depending on experience, location, and employer.

What are some common challenges faced by temporary utility pole inspectors on the job?

Temporary Utility Pole Inspectors often face challenges such as working in varying weather conditions, navigating difficult terrains, and ensuring safety while inspecting poles near active roadways or electrical lines. The role requires keen attention to detail to identify structural or safety issues and clear communication with utility crews and supervisors for reporting findings. Effective time management and adaptability are also essential, as daily assignments can change based on project priorities and emergency situations.

What does a temporary utility pole inspector do?

A Temporary Utility Pole Inspector is responsible for examining utility poles that are installed for temporary use, such as during construction projects or emergency repairs. They ensure that these poles meet safety and regulatory standards, are properly installed, and remain in good condition throughout their use. Inspectors check for signs of damage, stability, and correct placement, and they document any issues or hazards found. Their work helps prevent accidents and service interruptions by ensuring that temporary setups are safe and compliant with industry codes.

What is the difference between Temporary Utility Pole Inspector vs Utility Line Locator?

AspectTemporary Utility Pole InspectorUtility Line Locator
Required CertificationsOSHA safety training, industry-specific certificationsOSHA safety training, industry-specific certifications
Work EnvironmentInspecting utility poles on-site, outdoor environmentsLocating underground or overhead utility lines, outdoor environments
Employer & Industry UsageUtility companies, construction, telecomUtility companies, construction, telecom
Common Search & ComparisonYesYes

The main difference is that Temporary Utility Pole Inspectors focus on inspecting and assessing the condition of utility poles, ensuring safety and compliance. Utility Line Locators specialize in identifying underground or overhead utility lines before excavation or construction. Both roles require safety certifications and are essential in utility and construction industries, but they serve different functions in maintaining infrastructure safety and integrity.

What are the key skills and qualifications needed to thrive as a temporary utility pole inspector, and why are they important?

To thrive as a Temporary Utility Pole Inspector, you need knowledge of utility infrastructure, safety regulations, and inspection procedures, often supported by a high school diploma and relevant experience in utilities or construction. Familiarity with GIS mapping software, mobile inspection apps, and basic electrical testing equipment is typically required. Attention to detail, strong observational skills, and effective communication set top inspectors apart. These skills ensure accurate assessments, regulatory compliance, and the safety and reliability of utility services.
What cities near Dallas, TX are hiring for Temporary Utility Pole Inspector jobs? Cities near Dallas, TX with the most Temporary Utility Pole Inspector job openings:

Haul Truck Driver

Quanta Services

Grand Prairie, TX • On-site

Other

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted yesterday


Quanta Services rating

7.3

Company rating: 7.3 out of 10

Based on 52 frontline employees who took The Breakroom Quiz

43rd of 80 rated construction


Job description

About Us

NorthStar Energy Solutions, aQuanta Services, Inc.(NYSE:PWR) company, is headquartered in Grand Prairie, TX and operates across the Central Southwest part of the United States. We are leaders specializing in transmission lines, distribution lines, substation construction, foundations, storm damage repairs, and electrical contracting.

Joining our team means being part of an organization that values drive and inclusion. We focus on career development and reward excellence, recognizing each team member's unique contributions. We're at the forefront of powering modern life. Discover how your skills and dedication can make a real difference to us.

About this Role

NorthStar Energy Solutions, LLC. is hiring! The Heavy Haul Driver is responsiblefor safely transporting heavy equipment, oversized loads, construction materials, and utility construction assets to and from job sites, yards, vendors, and project locations. The role supports field operations by ensuring equipment is delivered on time, properly secured, and in compliance with company policies, DOT regulations, permit requirements, and all applicable federal, state, and local transportation laws.

What You'll Do

  • Safely operate heavy haul trucks, lowboys, flatbeds, step decks, RGN trailers, and other tractor-trailer combinations as assigned.

  • Transport heavy construction and utility equipment such as excavators, doze rs, backhoes, trenchers, digger derricks, bucket trucks, cable pullers, reel trailers, cranes, skid steers, loaders, and other specialized assets.

  • Load, unload, chain, bind, flag, and secure equipment and materials in accordance with company standards, DOT regulations, and proper load securement practices.

  • Perform pre-trip, en-route, and post-trip inspections of trucks, trailers, equipment, load securement, tires, lights, brakes, hydraulics, and safety equipment.

  • Verify load weights, dimensions, route restrictions, permits, escort requirements, and delivery instructions before transport.

  • Plan and follow safe routes for oversized or overweight loads, including awareness of bridge limits, height clearances, road restrictions, traffic conditions, and weather impacts.

  • Maintain accurate driver logs, inspection reports, fuel records, bills of lading, delivery tickets, permits, and other required transportation documentation.

  • Communicate professionally with dispatch, fleet leadership, project managers, foremen, mechanics, vendors, and job site personnel regarding pickup and delivery status.

  • Report equipment defects, safety concerns, incidents, delays, route issues, or maintenance needs immediately to the appropriate supervisor.

  • Assist with basic equipment movement, yard organization, trailer staging, and general fleet support duties as needed.

  • Follow all company safety rules, customer site requirements, OSHA expectations, and utility construction worksite procedures.

  • Maintain a clean, organized, and professional truck and trailer while representing the company in a safe and courteous manner.

What You'll Bring

Required Qualifications

  • Valid Class A Commercial Driver's License (CDL) with a clean and acceptable driving record.

  • Minimum of 2 to 3 years of experience operating commercial tractor-trailers; heavy haul or equipment transport experience strongly preferred.

  • Knowledge of DOT regulations, hours-of-service rules, vehicle inspection requirements, and load securement standards.

  • Experience loading, unloading, chaining, binding, and transporting heavy equipment safely.

  • Ability to read and understand permits, route plans, maps, GPS instructions, delivery paperwork, and basic equipment information.

  • Ability to safely operate manual and automatic transmission trucks as required by the fleet.

  • Must be able to pass pre-employment and random drug and alcohol testing in accordance with DOT and company requirements.

  • Must be able to work flexible hours, including early mornings, evenings, weekends, overnight travel, and overtime as project needs require.

  • Strong attention to detail, safety awareness, communication skills, and ability to work independently with minimal supervision.

Preferred Qualifications

  • Experience in utility construction, electrical transmission, distribution, gas, telecom, substation, foundation, or civil construction environments.

  • Experience operating lowboy, RGN, extendable, multi-axle, pole, reel, flatbed, step deck, or specialized utility trailers.

  • Experience hauling oversized or overweight loads and working with route permits and escort requirements.

  • Familiarity with construction equipment operation sufficient to load and unload equipment safely.

  • Tank, doubles/triples, or hazmat endorsements, if required by company operations.

  • Basic mechanical knowledge and ability to identify maintenance issues before they become safety or reliability concerns.

Physical Requirements

  • Ability to sit and drive for extended periods while maintaining focus and safe vehicle control.

  • Ability to climb on and off trucks, trailers, and equipment using three points of contact.

  • Ability to stand, wall

  • Ability to lift, carry, push, or pull up to 50 pounds as needed, including chains, binders, straps, tools, and safety equipment.

  • Ability to work outdoors in varying weather conditions, including heat, cold, rain, wind, mud, and uneven terrain.

  • Ability to wear required personal protective equipment, including hard hat, safety glasses, gloves, high-visibility clothing, steel-toe boots, and other job-specific PPE.

What You'll Get

Benefits:

  • 401(k)

  • 401(k) matching

  • Dental insurance

  • Disability insurance

  • Health insurance

  • Health savings account

  • Life insurance

  • Paid time off

  • Vision insurance

Equal Opportunity Employer

All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law.We are an Equal Opportunity Employer, including disability and protected veteran status.We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company’s Human Resources department.

ID2026-16176

CategoryField Operations/Craft Worker

Position TypeFull-Time Regular

LocationUS-TX-Grand Prairie

Workplace TypeField-Based


What Quanta Services employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom