ZipRecruiter

Log In

1

Temporary Flight Controls Engineer Jobs in Texas

Allen Control Systems

Controls Engineer

Austin, TX

$82K - $107K/yr

Controls Engineer - Motor & Motion Control Systems Company Overview: Allen Control Systems (ACS) is ... Experience developing flight control systems, motor control algorithms, or real-time motion control ...

AST SpaceMobile

Controls Engineer

Midland, TX

$82K - $106K/yr

... of flight hardware and Mechanical Ground Support Equipment (MGSE) - from design trades and ... Key Responsibilities Controls engineers are involved in the entire lifecycle of automation projects:

Allen Control Systems

Controls Engineer

Austin, TX · On-site

$82K - $107K/yr

Controls Engineer - Motor & Motion Control Systems Company Overview: Allen Control Systems (ACS) is ... Experience developing flight control systems, motor control algorithms, or real-time motion control ...

AST SpaceMobile

Controls Engineer

Midland, TX

$82K - $106K/yr

... of flight hardware and Mechanical Ground Support Equipment (MGSE) - from design trades and ... Key Responsibilities Controls engineers are involved in the entire lifecycle of automation projects:

AST SpaceMobile

Controls Engineer

Midland, TX · On-site

$82K - $106K/yr

... of flight hardware and Mechanical Ground Support Equipment (MGSE) - from design trades and ... Key Responsibilities Controls engineers are involved in the entire lifecycle of automation projects:

AST SpaceMobile

Controls Engineer

Midland, TX · On-site

$82K - $106K/yr

... of flight hardware and Mechanical Ground Support Equipment (MGSE) - from design trades and ... Key Responsibilities Controls engineers are involved in the entire lifecycle of automation projects:

Wilder Systems

Controls Engineer II

Austin, TX · On-site

$100K - $130K/yr

The Controls Engineer must be able conduct hardware selection, architect systems, and program at ... flight lines worldwide. We have a dynamic, talented, and collaborative engineering team and want ...

Actalent

PLC Controls Engineer

Haskell, TX

$60 - $85/hr

PLC Controls Engineer - HVAC / BMS (Hybrid Project Role) First initial 3-4 months is remote then ... If eligible, the benefits available for this temporary role may include the following: • Medical ...

Actalent

PLC Controls Engineer

Dallas, TX

$60 - $85/hr

PLC Controls Engineer - HVAC / BMS (Hybrid Project Role) First initial 3-4 months is remote then ... If eligible, the benefits available for this temporary role may include the following: • Medical ...

Olin Corporation

Process Controls Engineer

Freeport, TX · On-site

$99K - $150K/yr

Process Controls Engineer Location: Freeport, TX Salary: $99,000 - $150,000 Schedule: 9/80; 5-8s ... Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J or TN or who need sponsorship ...

next page

Showing results 1-20

All JobsFlight Controls Engineer JobsTemporary Flight Controls Engineer JobsTemporary Flight Controls Engineer Jobs in Texas

Temporary Flight Controls Engineer information

What are the most commonly searched types of Flight Controls Engineer jobs in Texas? The most popular types of Flight Controls Engineer jobs in Texas are:
What cities in Texas are hiring for Temporary Flight Controls Engineer jobs? Cities in Texas with the most Temporary Flight Controls Engineer job openings:
Temporary Flight Controls Engineer jobs near you
GNC Engineer III (Controls), Alpha

GNC Engineer III (Controls), Alpha

Firefly Aerospace

Cedar Park, TX • On-site

$78K - $101K/yr

Full-time

Medical, Dental, Vision, PTO

Re-posted 19 days ago

Firefly Aerospace rating

8.4

Company rating: 8.4 out of 10

Based on 9 frontline employees who took The Breakroom Quiz

23rd of 61 rated aerospace companies

Job description

ABOUT FIREFLY AEROSPACE
Firefly Aerospace is a space and defense technology company on a mission to reliably and repeatedly launch, land, and operate space systems from Earth to the Moon and beyond. As the partner of choice for critical space missions, Firefly is the first commercial company to launch a satellite to orbit with 24-hour notice and the first company to achieve a successful Moon landing. Headquartered in north Austin, Texas, Firefly is looking for passionate, hardworking innovators to join our team and help fuel our successful trajectory into space.
SUMMARY
As a Senior GNC Engineer specializing in controls and autonomy at Firefly, you will design and implement advanced control systems and autonomous flight software for operational launch vehicles. In this role, you will develop and tune attitude control software, support hardware-in-the-loop testing and system integration, and provide technical leadership while collaborating with multidisciplinary teams. This position combines advanced control theory, real-time embedded systems development, and hands-on flight operations support while mentoring junior engineers in a fast-paced operational environment.
RESPONSIBILITIES
  • Design, analyze, and tune launch vehicle attitude control software to ensure stable flight from launch to orbit
  • Implement control techniques for mission-critical flight phases using thrust vector control actuators, reaction control thrusters, and aerodynamic surfaces
  • Develop control systems accounting for complex launch vehicle dynamics including aerodynamic effects, structural flex modes, propellant slosh, and control structure interaction
  • Establish technical standards and validation methodologies for control system design, software development, and hardware-in-the-loop testing
  • Conduct stability analysis, sensitivity studies, and performance optimization for control systems under nominal and off-nominal flight conditions
  • Support hardware-in-the-loop test campaigns for integrated GNC systems including control algorithm validation, flight software verification, and system-level performance testing
  • Drive resolution of complex GNC challenges requiring deep technical expertise and rapid problem-solving
  • Provide technical direction on system architecture and serve as subject matter expert for launch vehicle control
  • Mentor junior engineers in control theory and flight software development
  • Author technical documentation and analysis reports that communicate GNC concepts and results to diverse audiences
  • Interface with cross-discipline teams to integrate control software with vehicle hardware
  • Serve as a GNC console operator for launch operations and perform post-flight analysis to improve vehicle models
  • Champion continuous improvement initiatives for GNC processes, tools, and operational efficiency
QUALIFICATIONSRequired
  • Bachelor's degree in aerospace engineering, mechanical engineering, electrical engineering, computer science, or related field
  • 5-10 years of experience in launch vehicle GNC systems with significant depth in attitude control system design or flight software development
  • Advanced knowledge of attitude dynamics and control theory, including rotational dynamics, attitude representations, control moment generation, and stability analysis
  • Strong understanding of classical control theory and frequency domain analysis techniques
  • Expertise in real-time software development using C++ for flight-critical applications
  • Experience developing high-fidelity actuator models and attitude control system testbeds
  • Proficiency in hardware-in-the-loop testing and requirement verification for flight-critical systems
  • Understanding of software development best practices including version control (Git), code documentation, and testing
  • Excellent communication and presentation skills
Desired
  • Master's degree or PhD in aerospace engineering, mechanical engineering, electrical engineering, applied mathematics, or related field
  • Experience architecting and implementing control systems for operational launch vehicles from development through flight
  • Expertise in advanced control techniques such as nonlinear control methods, optimal control, model predictive control, or adaptive control applied to launch vehicle applications
  • Hands-on experience with launch vehicle actuator systems including thrust vector control actuators, reaction control thrusters, and aerodynamic surfaces
  • Advanced knowledge of state estimation techniques including Kalman filtering, sensor fusion, and covariance analysis
  • Advanced knowledge of numerical methods for control law tuning, root-solving, and parameter optimization
  • Experience with modern flight software frameworks and real-time operating systems
  • Software engineering expertise with proficiency in development practices including version control, code review, testing, documentation, and CI/CD workflows
  • Proficiency in Python for scripting, data analysis, and automation
  • Working knowledge of launch vehicle systems and mission operations
  • Proven ability to develop junior engineers while managing technical responsibilities
  • Track record of thought leadership through publications, presentations, or contributions to industry state-of-the-art

Firefly offers outstanding benefits for our employees, including generous health, dental and vision plans with low plan deductibles, parental leave, educational reimbursement, short term disability, and flexible PTO options.
To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Firefly Aerospace, Inc. is an Equal Opportunity Employer; employment with Firefly is governed based on merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

What Firefly Aerospace employees say

Pay

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply