ZipRecruiter

Log In

1

Static Equipment Engineer Jobs in Florida (NOW HIRING)

M.C. Dean, Inc

UPS Tech 1 - Orlando, FL

Orlando, FL · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Our people are passionate about engineering innovation that improves lives and drives impactful ... Our technicians are factory trained on most major UPS manufacturers of static equipment (e.g., MGE ...

M.C. Dean, Inc

UPS Tech 3 - Tampa, FL

Tampa, FL · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Our people are passionate about engineering innovation that improves lives and drives impactful ... Our technicians are factory trained on most major UPS manufacturers of static equipment (e.g., MGE ...

M.C. Dean, Inc

UPS Tech 4 - Tampa, FL

Tampa, FL · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Our people are passionate about engineering innovation that improves lives and drives impactful ... Our technicians are factory trained on most major UPS manufacturers of static equipment (e.g., MGE ...

Info Way Solutions

FPGA Design Engineer

Melbourne, FL · On-site

$114K - $157K/yr

Debug and validate FPGA designs using laboratory equipment such as oscilloscopes, logic analyzers ... Strong understanding of FPGA synthesis, place & route, timing closure, and static timing analysis.

CBRE

Senior Building Engineer

Tampa, FL · On-site

$98K - $135K/yr

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Operates and maintains equipment to deliver maximum uptime. * Maintains the professional ... STS (Static Transfer Switch) * BMS (Building Management System) * Mechanical, Electrical, and ...

CBRE

Senior Building Engineer

Tampa, FL · On-site

$98K - $135K/yr

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Operates and maintains equipment to deliver maximum uptime. * Maintains the professional ... STS (Static Transfer Switch) * BMS (Building Management System) * Mechanical, Electrical, and ...

CBRE

Senior Building Engineer

Tampa, FL · On-site

$98K - $135K/yr

  • Medical

  • Dental

  • Vision

  • Retirement

  • PTO

Operates and maintains equipment to deliver maximum uptime. * Maintains the professional ... STS (Static Transfer Switch) * BMS (Building Management System) * Mechanical, Electrical, and ...

next page

Showing results 1-20

All JobsStatic Equipment Engineer JobsStatic Equipment Engineer Jobs in Florida

Static Equipment Engineer information

See Florida salary details

$29.1K

$76K

$102.8K

How much do static equipment engineer jobs pay per year?

As of Aug 13, 2026, the average yearly pay for static equipment engineer in Florida is $76,039.00, according to ZipRecruiter salary data. Most workers in this role earn between $62,800.00 and $87,100.00 per year, depending on experience, location, and employer.

What is a static equipment engineer?

Static equipment engineers are professionals who specialize in the design, analysis, installation, and maintenance of non-moving equipment used in industries such as oil & gas, petrochemical, and power plants. This includes equipment like pressure vessels, heat exchangers, storage tanks, and reactors. They ensure that these components meet safety, regulatory, and performance standards. Static equipment engineers work closely with project teams to select appropriate materials and ensure equipment reliability and integrity throughout its lifecycle.

What is the difference between Static Equipment Engineer vs Mechanical Engineer?

AspectStatic Equipment EngineerMechanical Engineer
Primary FocusDesign, maintenance, and integrity of static equipment like pressure vessels, heat exchangers, and piping systemsDesign, analysis, and manufacturing of mechanical components and systems, including machinery and moving parts
CertificationsTypically API, ASME certificationsProfessional Engineer (PE), mechanical engineering licenses
Work EnvironmentOil & gas, petrochemical, power plantsManufacturing, automotive, aerospace, energy sectors
Common UsageIndustry-specific roles focusing on static equipmentBroader engineering roles including dynamic systems

The Static Equipment Engineer specializes in static equipment within industrial plants, focusing on design, maintenance, and safety. Mechanical Engineers have a broader scope, working on various mechanical systems across multiple industries. While both roles require engineering credentials, their work environments and focus areas differ significantly.

What are the key skills and qualifications needed to thrive as a static equipment engineer?

To thrive as a Static Equipment Engineer, you need a solid background in mechanical engineering, knowledge of industry codes (such as ASME or API), and experience with the design, selection, and maintenance of static equipment like pressure vessels and heat exchangers. Familiarity with engineering design software (e.g., AutoCAD, PV Elite), inspection tools, and relevant certifications such as API 510 or 653 are typically required. Strong problem-solving abilities, attention to detail, and effective communication with multidisciplinary teams are essential soft skills. These competencies ensure the safety, reliability, and regulatory compliance of critical equipment in industrial operations.

What are the typical challenges faced by a static equipment engineer when coordinating with other engineering disciplines during large projects?

Static Equipment Engineers often collaborate closely with process, piping, and structural engineers to ensure equipment such as pressure vessels, heat exchangers, and storage tanks are properly integrated into plant designs. A common challenge is aligning specifications and timelines across disciplines, as changes in one area (like piping routes) can impact equipment layout or support requirements. Effective communication and early involvement in project planning help minimize costly rework and ensure safety and compliance standards are met. Embracing a proactive approach to cross-disciplinary coordination is key for project success.

What are popular job titles related to Static Equipment Engineer jobs in Florida?

For Static Equipment Engineer jobs in Florida, the most frequently searched job titles are:

What job categories do people searching Static Equipment Engineer jobs in Florida look for?

The top searched job categories for Static Equipment Engineer jobs in Florida are:

Static Equipment Engineer jobs near you
Infographic showing various Static Equipment Engineer job openings in Florida as of August 2026, with employment types broken down into 1% As Needed, 80% Full Time, 15% Part Time, 1% Temporary, 2% Contract, and 1% Nights. Highlights an 99% Physical, and 1% Remote job distribution, with an average salary of $76,039 per year, or $36.6 per hour.

Information Technology_USA - USA_Engineer

Real Soft, Inc.

Jacksonville, FL • On-site

Contractor

Re-posted 11 days ago

Job description

**Please strictly adhere to the following resume naming convention:
ALL CAPS, NO SPACES B/T UNDERSCORES
PTN_US_GBAMSREQID_CandidateBeelineID
i.e. PTN_US_9999999_SKIPJOHNSON0413
: - /hr
MSP Owner: Deepa Narayanan
Location : Cortland NY
Duration: 6 months
skill id: 10787332
ONSITE ROLE
Lead ASME/PED Engineer
Lead ASME/PED Engineer
8 plus years of experience in Lead engineer with experience in static equipment design and handling of ASME Certification related documentation as well able to provide response/ update documents/ revalidate design documents based on Inspection Agency's finding. Well versed in AMSE Sec VIII, IX Code requirement, Welding and interpretations.
WPS Development & Review:
• Draft, revise, and validate Welding Procedure Specifications (WPS) in accordance with ASME Section IX.
• Ensure WPS documents reflect current materials, welding processes, and joint configurations used in production.
WPQR
• Prepare and maintain Welding Procedure Qualification Records (WPQR) based on test results and inspection reports.
• Coordinate with quality and engineering teams to ensure WPQRs are traceable and meet regulatory standards.
WPQ
• Facilitate welder performance qualification (WPQ) testing and documentation.
• Ensure all welders are certified per applicable codes and maintain up-to-date records of qualifications.
Training & Compliance:
• Develop and deliver training programs for welders and inspectors on ASME standards and internal procedures.
• Conduct refresher sessions and onboarding for new personnel to ensure consistent understanding of welding compliance.
Audit & Documentation Support:
• Assist in preparing documentation for internal and external audits related to ASME certification.
• Proficiency in design and calculation software (PV Elite, Compress, etc.)
• Expertise in stress analysis, load calculations, and material compliance
• Experience preparing PED technical dossiers and CE marking files
• Identify gaps in current practices and recommend corrective actions to align with certification requirements.
Lead engineer with experience in static equipment design and handling of ASME Certification related documentation as well able to provide response/ update documents/ revalidate design documents based on Inspection Agency's finding. Well versed in AMSE Sec VIII, IX Code requirement, Welding and interpretations.
Bachelor of Engineering or Equivalent, Project Code :

Apply