ZipRecruiter

Log In

1

Solar Installation Jobs in Cleveland, TX (NOW HIRING)

NRG

Summer Installation Technician - Houston TX

Houston, TX · On-site

$21 - $26/hr

Direct-to-Home Smart Home Pros provide expert-level installation and services, while delivering the ... Technical Aptitude: Experience in cable/satellite install, pest control, construction, or solar ...

Signal Energy

Project Manager

Houston, TX · Hybrid

Deep understanding of EPC construction practices, renewable energy technologies, and utility-scale solar installations. * Knowledge of construction safety standards, OSHA requirements, and ...

Applied High Voltage

Project Manager

Houston, TX · Hybrid

Deep understanding of EPC construction practices, renewable energy technologies, and utility-scale solar installations. * Knowledge of construction safety standards, OSHA requirements, and ...

SB Inc.

Be Seen First

Sales Representative

Houston, TX · On-site

$104K/yr

We work with top-performing products in the solar industry and prioritize getting your deals installed first -- so your commissions don't sit, they move. If you're a driven salesman or saleswoman who ...

Qcells

Senior Mechanical R&D Engineer

Houston, TX · Hybrid

$145K - $170K/yr

Develop new solar tracker and installation automation products from concept to commercialization as a member of the R&D team * Perform hands-on testing of prototype products in laboratory and field ...

Willdan Group, Inc.

Construction Manager

Houston, TX · On-site

... solar installations, microgrids, battery energy storage systems (BESS), and other advanced electrical solutions for data centers, industrial facilities, and commercial clients. We deliver turnkey ...

ADP, Inc.

Electrical Engineer - BESS

Houston, TX · On-site

$100 - $125/hr

The company offers a comprehensive range of products and services designed to optimize the performance and efficiency of solar power installations. Sungrow North America is known for its commitment ...

Equans France

PV Electrical Engineer

Houston, TX

... installations, ensuring compliance with regulatory requirements and industry standards. Your Main Responsibilities: * Lead the detailed electrical design and engineering of solar PV and BESS projects ...

3MG Roofing and Solar

Be Seen First

Outside Sales Representative - Roofing

Houston, TX · On-site

$80K - $250K/yr

Experience: * Proven success in sales (ideally in roofing, solar, or service-related industries ... GAF President's Club Master Elite Installer with leading-edge roofing solutions. * Uncapped ...

Moss

COMMISSIONING TECHNICIAN

Houston, TX · On-site

$18.75 - $25.75/hr

... solar and BESS projects * Interpret electrical drawings, schematics, and one-line diagrams to verify installation and resolve field issues * Coordinate with construction, and SCADA teams to ensure ...

Equans France

PV Cost Estimator

Houston, TX · On-site

Equans provides its customers with excellent technical expertise in the design, installation ... The Photovoltaic and Battery Storage division, under the Equans Solar & Storage brand, is a unique ...

previous page

Showing results 41-60

All JobsSolar Installation JobsSolar Installation Jobs in Cleveland, TX

Solar Installation information

See Cleveland, TX salary details

$13

$22

$32

How much do solar installation jobs pay per hour?

As of Sep 7, 2026, the average hourly pay for solar installation in Cleveland, TX is $22.12, according to ZipRecruiter salary data. Most workers in this role earn between $18.03 and $23.89 per hour, depending on experience, location, and employer.

What does a solar installation technician do?

A solar installation technician is responsible for setting up solar panels and related systems on rooftops or other structures to harness solar energy. Their tasks include site assessment, measuring and cutting materials, assembling and mounting panels, connecting electrical components, and ensuring systems are installed safely and efficiently. These technicians often work with electricians and follow strict safety protocols. They may also perform maintenance and troubleshooting on existing solar power systems. The role requires technical skills, physical stamina, and a commitment to renewable energy solutions.

What are the key skills and qualifications needed to thrive as a solar installation technician, and why are they important?

To thrive as a Solar Installation Technician, you need a solid understanding of electrical systems, mechanical aptitude, and often a high school diploma or relevant trade certification. Familiarity with tools such as multimeters, power drills, and solar design software, as well as certifications like NABCEP, are commonly required. Strong problem-solving skills, attention to detail, and effective teamwork are essential soft skills in this role. These abilities are crucial for ensuring safe, efficient, and compliant installation of solar energy systems in various environments.

What are the typical challenges faced during a solar installation project, and how can they be managed?

Solar installation professionals often encounter challenges such as working in varying weather conditions, handling complex rooftop layouts, and coordinating with electricians and building inspectors. Managing these issues requires strong problem-solving skills, attention to safety protocols, and effective communication with team members and clients. Staying updated on local regulations and best practices can also help ensure installations are completed efficiently and safely.

What is the difference between Solar Installation vs Solar Panel Technician?

AspectSolar InstallationSolar Panel Technician
CertificationsOSHA, NABCEP Installation CertificationOSHA, NABCEP PV Associate or Installer Certification
Work EnvironmentConstruction sites, rooftops, outdoorIndoor and outdoor, troubleshooting, maintenance
Job FocusInstalling solar systems, system setupMaintaining, repairing, troubleshooting solar panels
Employer & Industry UsageSolar installation companies, contractorsSolar service companies, maintenance firms

While both roles involve working with solar energy, Solar Installation focuses on installing new solar systems, whereas Solar Panel Technicians primarily handle maintenance and repairs. Both require similar certifications and often work in outdoor environments, but their daily tasks and responsibilities differ significantly.

Is becoming a solar installation worth it?

A career in solar installation involves installing and maintaining solar panels, often requiring technical skills and safety certifications. It is a growing field with increasing demand due to renewable energy initiatives, and workers typically experience physical outdoor work and variable schedules.

Is it hard to get a job in solar installation?

Getting a job in solar installation can be accessible for those with technical skills, physical fitness, and a willingness to learn. Entry-level positions often require basic knowledge of electrical systems or construction, and certifications like OSHA or NABCEP can improve job prospects. Experience with tools and working outdoors is also beneficial.

What are popular job titles related to Solar Installation jobs in Cleveland, TX?

For Solar Installation jobs in Cleveland, TX, the most frequently searched job titles are:

What cities near Cleveland, TX are hiring for Solar Installation jobs?

Cities near Cleveland, TX with the most Solar Installation job openings:

Solar Installation jobs near you
Infographic showing various Solar Installation job openings in Cleveland, TX as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $46,011 per year, or $22.1 per hour.

Principal Structural Engineer

Solar Turbines Incorporated

Houston, TX • On-site

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 23 days ago

Solar Turbines rating

8.4

Company rating: 8.4 out of 10

Based on 23 frontline employees who took The Breakroom Quiz

90th of 499 rated machine equipment manufacturers

Job description

Career Area:
Engineering
Job Description:
Your Work Shapes the World at Caterpillar Inc.
When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it.
Solar Turbines, a wholly owned subsidiary of Caterpillar Inc. is looking for qualified Structural Engineer to provide Balance-of-Plant [BOP] Engineering and Design for projects utilizing Solar's family of industrial gas turbines.
JOB DESCRIPTION:
  • This position is intended as an experienced engineering position for candidates with a minimum of 10 years oil & gas industry experience.
  • Primary role is to fulfill the structural engineering needs for prefabricated modular products for oil & gas facilities engineering in the support of sales and execution for Solar Turbines products.
  • Structural engineer will be responsible for the civil/structural engineering for balance of plant design of oil & gas projects utilizing gas turbine compressor sets & generators. Typical projects include gas compressor stations, power generation and co-generation facilities, offshore Single Lift Modules for both compression and power generation, and Modular Building Solutions. "Modular Building Solutions" refers to Solar's Configurable Modular Prefabricated Building (CMPB). The CMPB is a structural block based building that houses Solar Turbomachinery.
  • Provide design/analysis of structural steel projects and proposals to assure that the design meets customer specifications, Solar specifications and industry codes and standards.
  • Provide mentorship to junior engineers.
  • Assist in meetings necessary to support the lift and transportation (onshore/offshore) of large equipment.
  • Travel to fabrication sites, installation sites, and customer facilities as needed to support project requirements.
  • Position requires flexibility with personal schedule to meet deadlines and support occasional business travel.
  • Work with other disciplines (mechanical, piping, instrumentation, and electrical) to develop efficient structural designs

QUALIFICATIONS:
  • Minimum of Bachelor of Science Degree in Structural Engineering
  • Master of Science Degree in Structural engineering is a plus
  • Professional Engineering License in the State of Texas is required, other states are a plus.
  • Applicant's background should include familiarity with ASTM, ACI, CRSI, ASCE, OSHA, IBC, & AWS.
  • Specialty codes:
  • PIP - required.
  • ASCE "Wind Loads for Petrochemical and Other Industrial Facilities - required.
  • API 2A, NFPA. - Desirable.
  • Codes used internationally (codes from other countries) - Desirable

  • Ability to work in the United States and able to travel internationally. Current US passport is preferred.
  • Demonstrated proficiency in problem solving and troubleshooting.
  • Strong communication skills, both written and verbal, in the English language.
  • Sense of urgency and good organizational skills are required to work with multiple projects and competing priorities.
  • Experience with industry standard software and structural analysis software - STAAD Pro, RAMconnect, MathCAD.
  • 6-Sigma background is a plus.
  • Experience with working with a fabrication yard or facility is a plus.
  • Basic knowledge of mechanical equipment (turbines, compressors, generators, etc.) is a plus

PROBLEM COMPLEXITY:
Assignments cover a variety of structural design problems related to facilities engineering. Must be able to perform detailed analysis and calculations required and document results. Projects range from 1 to 18 months in length, occasionally longer.
WORK DIRECTION AND LATITUDE:
  • Works under the direction of project engineer on assigned proposal or project.
  • Reports organizationally to Project Execution Engineering Manager (Construction Services).
  • Performs design engineering, and specifies equipment related to discipline, on assigned proposals and projects under general supervision.
  • Follows established processes and procedures without exception.
  • Reviews engineered products (calculations, drawings, reports, specifications for soundness of technical judgment and overall adequacy and accuracy.
  • Initiates and recommends design changes as required.
  • Initiates and recommends departmental process changes as required.

RESPONSIBILITIES AND DUTIES:
  • Develop structural designs for offshore Single Lift Modules, Modular Building Products, development of civil and foundation designs for land-based compression and power generation equipment, structural skid design for skidded/modular process equipment, preparing project cost estimates, and support of construction activities.
  • Produce Structural Analysis and Design Reports for Modular Building Solutions including connection details and foundation interface loads.
  • Actively contribute to the development of project drawings such as Structural Arrangements & Details, Foundation Designs, Civil design, etc.
  • Actively participate in the preparation and monitoring of project schedule
  • Produce designs and specifications for structural/civil components as found commonly in the oil & gas environment.
  • Participate in project design reviews, marine surveys, and various other departmental meetings involving structural issues.
  • Interface with suppliers during the definition of equipment scope and throughout project execution
  • Assist in the development of documents required for onshore and offshore transportation of large equipment.
  • Support the field during fabrication, installation, commissioning, and start-up of designed systems. Fabrication is normally at Solar's fabrication facility (TurboFab) in Channelview, TX.
  • Recommend design changes affecting areas of direct responsibility
  • Prepare proposal manhours and cost estimates and keep track of the manhours and equipment cost during project execution.

LIAISON:
  • Frequent contact with engineers, supervisors, quality, purchasing, and fabrication to obtain information and give technical advice and direction, after proper review, related to assigned projects and proposals.
  • Occasional contact with suppliers and customers regarding technical and documentation expediting issues.

BUSINESS CONTRIBUTION:
Completes assigned tasks in a timely and professional manner per schedule, thus contributing to organizational effectiveness
PRINCIPAL ACCOUNTABILITIES:
  • Meets customer and company expectations for a quality product
  • Provides technical expertise on assigned projects
  • Identifies cost reduction opportunities for Solar's activities
  • Assists in the development of departmental standards, specifications, tools, processes, and equipment.
  • Resolves complex structural problems as they arise.
  • Ensures project deliverables (documents and equipment) are delivered on time

MISCELLANEOUS ITEMS:
  • Ability to read/write in technical Spanish is a plus.
  • Minimum of Bachelor of Science Degree in Structural Engineering.
  • Professional Engineering License in the State of Texas, A strong plus..
  • Applicant's background should include familiarity with ASTM, ACI, CRSI, ASCE, OSHA, IBC, & AWS.
  • Specialty codes:
  • PIP - required.
  • ASCE "Wind Loads for Petrochemical and Other Industrial Facilities - required.
  • Experience with industry standard software and structural analysis software - STAAD Pro (required), RAMconnect, MathCAD.
  • Ability to work in the United States and able to travel internationally. Current US passport is preferred.
  • Demonstrated proficiency in problem solving and troubleshooting.
  • Strong communication skills, both written and verbal, in the English language.
  • Sense of urgency and good organizational skills are required to work with multiple projects and competing priorities.

PREFERRABLE ADDITIONAL QUALIFICATIONS:
  • Master of Science Degree in Structural engineering is a plus
  • Professional Engineering License in other states are a plus.
  • Ability to read/write in technical Spanish is a plus.
  • 6-Sigma background is a plus.
  • Experience with working with a fabrication yard or facility is a plus.
  • Basic knowledge of mechanical equipment (turbines, compressors, generators, etc.) is a plus
  • Specialty codes:
  • API 2A, NFPA. - Desirable.
  • Codes used internationally (codes from other countries) - Desirable

Summary Pay Range:
$120,600.00 - $180,900.00
Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar.
Benefits:
Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits.
  • Medical, dental, and vision benefits*
  • Paid time off plan (Vacation, Holidays, Volunteer, etc.)*
  • 401(k) savings plans*
  • Health Savings Account (HSA)*
  • Flexible Spending Accounts (FSAs)*
  • Health Lifestyle Programs*
  • Employee Assistance Program*
  • Voluntary Benefits and Employee Discounts*
  • Career Development*
  • Incentive bonus*
  • Disability benefits
  • Life Insurance
  • Parental leave
  • Adoption benefits
  • Tuition Reimbursement

* These benefits also apply to part-time employees
This position requires working onsite five days a week.
Visa Sponsorship is not available for this position.
Posting Dates:
Any offer of employment is conditioned upon the successful completion of a drug screen.
Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply.
Not ready to apply? Join our Talent Community.

What Solar Turbines employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply