ZipRecruiter

Log In

1

Seasonal Statistical Process Control Jobs in Alabama

Hyundai Mobis

MUA Quality Control Manager

AL · On-site

Analysis (P-FMEAs), Control Plans, Process Flow Charts, Statistical Process Control (SPC), Operator Work Instructions, and Quality Alerts. * Approve Engineering Changes (EC) in terms of quality ...

OCI Alabama LLC

Process Engineer AL

Decatur, AL · On-site

$104K - $156K/yr

Experience with statistical process control and quality improvement * Demonstrated capability to interface and maintain effective relationships with all departments and employees in a team-oriented ...

AAA USA Inc

Quality Inspector

Mobile, AL · On-site

Process Control: Monitor and verify quality in accordance with statistical process control or other control procedures. * Line Clearances: Perform line clearances after each lot to ensure all ...

X-Bow Systems

Process Quality Engineer

Huntsville, AL · On-site

... statistical process control (SPC), and quality metrics About X-Bow Launch Systems, Inc. X-Bow (pronounced "Crossbow") is a U.S. defense technology and rocket propulsion company that has developed an ...

Smartlam NA Dothan LLC

Process Manager

Dothan, AL · On-site

$56K - $80K/yr

Knowledge of statistical process control (SPC), root cause analysis, and corrective action processes. * Working knowledge of Lean Manufacturing and Six Sigma methodologies. * Strong analytical ...

X-Bow Systems

Process Quality Engineer

Huntsville, AL · On-site

... statistical process control (SPC), and quality metrics --- About X-Bow Launch Systems, Inc. X-Bow (pronounced "Crossbow") is a U.S. defense technology and rocket propulsion company that has developed ...

Xbow

Process Quality Engineer

Huntsville, AL

... statistical process control (SPC), and quality metrics --- About X-Bow Launch Systems, Inc. X-Bow (pronounced "Crossbow") is a U.S. defense technology and rocket propulsion company that has developed ...

First Solar

Engineer- Manufacturing II USA

Trinity, AL · On-site

Demonstrated Proficiency in applying Statistical Process Control) * Structured Problem-Solving Method (such as DMAIC) * Demonstrated knowledge of manufacturing processes * Demonstrated proficiency in ...

NOV, Inc.

Quality Supervisor

Grand Bay, AL · On-site

Proficiency in Statistical Process Control (SPC), Statistical Quality Control (SQC), and quality tools. * Ability to interpret complex technical drawings and specifications with tight tolerances.

next page

Showing results 1-20

All JobsStatistical Process Control JobsSeasonal Statistical Process Control JobsSeasonal Statistical Process Control Jobs in Alabama

Seasonal Statistical Process Control information

What is the difference between Seasonal Statistical Process Control vs Quality Control Technician?

AspectSeasonal Statistical Process ControlQuality Control Technician
CertificationsStatistical or quality certifications (e.g., Six Sigma, SPC certifications)Quality control certifications (e.g., CQI, ISO auditor)
Work EnvironmentManufacturing, production lines with seasonal fluctuationsManufacturing, inspection labs, quality assurance
Industry UsageUsed to monitor process stability over seasonal changesUsed to inspect and test products for quality compliance

Seasonal Statistical Process Control focuses on analyzing process data to identify seasonal variations and maintain process stability, while Quality Control Technicians primarily inspect products to ensure quality standards are met. Both roles require knowledge of statistical methods and quality standards but serve different functions within manufacturing processes.

What cities in Alabama are hiring for Seasonal Statistical Process Control jobs? Cities in Alabama with the most Seasonal Statistical Process Control job openings:
Seasonal Statistical Process Control jobs near you
MUA Quality Control Manager

MUA Quality Control Manager

Hyundai Mobis

AL • On-site

Full-time

Posted 4 days ago

Hyundai Mobis rating

7.3

Company rating: 7.3 out of 10

Based on 28 frontline employees who took The Breakroom Quiz

Job description

Overview
The Quality Manager is a member of the Mobis US Alabama (MUA) QC team and is responsible for providing technical QC support to all areas of the Module operation and providing leadership and guidance to QC Team Members and Supplier Quality.
Responsibilities
(To perform within this position successfully, the incumbent must be able to perform each essential duty satisfactorily. Other duties may be assigned.)
  • Manage technical support for all areas of the plant in assessment, implementation, and maintenance of Quality Systems that meet or exceed customer and TS16949 standards.
  • Provide technical support to QC from parts quality, process quality, and 0 Km claims in customer plant.
  • Lead Quality team consisting of Part Quality (Measuring room), Process (Patrol) Quality, Final Inspection (Keeper), Supplier Quality Engineer (SQE) and Customer Quality.
  • Define specifications for good and defective products from inspection, parts, process, and 0 Km claims.
  • Lead countermeasure actions based on 8D-Report procedures.
  • Review customer approval to 0 Km claim countermeasure actions in Supplier Quality Management System (SQMS).
  • Review and approve inspection reports for special characteristics (Total Quality, Run Out, Press Pull Out Force).
  • Analyze Key Quality Characteristics (KQCs) statistically based on Statistical Quality Control (SQC).
  • Review and approve wheel alignment deviation from those of customer inspection records.
  • Lead quality activities for development for new car line using Advanced Product Quality Planning (APQP) and Mercedes Development System (MDS).
  • Read and interpret 3D and 2D Drawings and manufacturing aides.
  • Manage control of product quality through the development and use of Process Failure Mode Effects.
  • Analysis (P-FMEAs), Control Plans, Process Flow Charts, Statistical Process Control (SPC), Operator Work Instructions, and Quality Alerts.
  • Approve Engineering Changes (EC) in terms of quality impact.
  • Comply with and provide safety in the workplace, including attendance at safety meetings as well as conducting quality and safety meetings when necessary.
  • Manage customer satisfaction by quality member who is first contact for 0 Km claim in customer plant.
  • Review and check on summary of quality index (Daily, Weekly, and Monthly).
  • Prepare and lead actions from all departments for customer audit.
  • Manage measuring room and calibration done by inspectors and measuring room coordinator.
  • Analyze measuring system based on MSA (Measurement Systems Analysis).

AUTHORITY & SCOPE
This role operates within defined corporate policies and procedures and exercises judgment appropriate to its level of responsibility. The position may influence decisions related to functional operations, processes, or recommendations and escalate matters as required
Supervisory Responsibilities: Yes
Qualifications
(The requirements listed below are representative of the knowledge, skills, and/or ability required and preferred for this position.)
Required Education & Experience:
  • Bachelor's Degree in an Engineering field plus 5 years of experience in Quality Control within a manufacturing environment
  • Three (3) years of experience in a supervisory or management role in manufacturing

Required Knowledge, Skills, & Abilities:
  • Detailed knowledge of QC processes and systems
  • Knowledge of PFMEA, Control Plan, MSA (Measurement Systems Analysis), SPC (Statistical Process Control), LPAs, Poka Yoke, 8D/5 Why Analysis
  • Knowledge of IATF 16-949, VDA 6.3
  • Excellent Leadership skills
  • Strong written and verbal communication skills
  • Advanced Analytical skills
  • Organizational skills
  • Proficiency in Microsoft Excel and PowerPoint
  • Strong problem-solving and troubleshooting skills
  • Ability to work effectively in a fast-paced and high-pressure environment
  • Ability to effectively coach and lead teams

Preferred Education & Experience:
  • Bachelor's degree in mechanical engineering
  • Experience in automotive assembly and/or automotive manufacturing
  • Experience dealing with an automotive OEM (Original Equipment Manufacturer)
  • Knowledge of IATF 16949 or VDA 6.3 certification requirements
  • Knowledge of APQP and MDS (MDS: Mercedes Development System, if possible)
  • Knowledge of VDA-RGA
  • Knowledge of Mercedes Benz PPA (Part Production Approval) Procedure
  • Knowledge of Mercedes Benz Quality IT system (SQMS)
  • Language English and German (German, if possible)
  • Three (3) years or more experience with forging, machining, surface treatment (Painting) and assembly process

Certificates, Licenses, and Registrations: None Required
Working Conditions:
  • Office setting, some walking on production floor.
  • This is a contract-to-hire role
  • This position is located in McCalla, AL

What Hyundai Mobis employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply