1

Scrap Inspector Jobs (NOW HIRING)

As an Inspector you will be the first point of contact with our customers as they bring scrap materials into the yard. Your primary responsibilities will be outside in all weather inspecting and ...

As an Inspector you will be the first point of contact with our customers as they bring scrap materials into the yard. Your primary responsibilities will be outside in all weather inspecting and ...

As an Inspector you will be the first point of contact with our customers as they bring scrap materials into the yard. Your primary responsibilities will be outside in all weather inspecting and ...

ABOUT HARMON SCRAP METAL Here at Harmon Scrap Metal, we contribute to our environment by recycling ... Inspect all incoming material to ensure it meets company quality and safety standards * Guide ...

Pre use inspection and responsible management of equipment is required. Rail - Scrap Yard Operators are responsible for safe rail movement to support plant operations. Including strategic and timely ...

Pre use inspection and responsible management of equipment is required. Rail - Scrap Yard Operators are responsible for safe rail movement to support plant operations. Including strategic and timely ...

Scrap Yard Operator

Tomball, TX · On-site

$26.76/hr

Pre use inspection and responsible management of equipment is required. Rail - Scrap Yard Operators are responsible for safe rail movement to support plant operations. Including strategic and timely ...

next page

Showing results 1-20

Scrap Inspector information

What are the key skills and qualifications needed to thrive as a Scrap Inspector, and why are they important?

To thrive as a Scrap Inspector, you need a thorough understanding of materials identification, quality control procedures, and safety regulations, often supported by a high school diploma or equivalent. Familiarity with inspection tools, weighing systems, and industry-specific software is typically required. Attention to detail, integrity, and effective communication are crucial soft skills for accurately assessing scrap and ensuring compliance with standards. These skills and qualities are vital to ensure safe operations, minimize errors, and maintain the value and integrity of recyclable materials.

What are the common challenges faced by Scrap Inspectors on the job?

Scrap Inspectors often encounter challenges such as identifying and sorting a wide variety of materials in environments that can be dusty, noisy, and physically demanding. They must be vigilant to ensure hazardous materials are handled safely and that all scrap meets regulatory standards. Additionally, keeping up with evolving recycling guidelines and maintaining accurate records can require strong attention to detail and adaptability. Effective communication with team members and machinery operators is essential to ensure efficient workflow and workplace safety.

What are Scrap Inspectors?

Scrap Inspectors are professionals responsible for examining and evaluating scrap materials to determine their quality, type, and potential for recycling or reuse. They inspect incoming and outgoing scrap to ensure it meets industry and company standards, separating valuable materials from waste. Their role helps maximize resource recovery, reduce environmental impact, and ensure compliance with regulations. Scrap Inspectors often work in recycling centers, manufacturing plants, or scrapyards, and may use specialized tools and safety equipment during inspections.

What is the difference between Scrap Inspector vs Scrap Supervisor?

AspectScrap InspectorScrap Supervisor
CertificationsQuality control certifications, safety trainingSame as Scrap Inspector, plus supervisory certifications
Work EnvironmentInspection sites, scrap yards, manufacturing plantsSupervisory offices, scrap yards, manufacturing facilities
Employer & Industry UsageManufacturing, recycling, metal processingSame industries, with added leadership responsibilities
Search & Comparison IntentUnderstanding inspection roles in scrap industryComparing inspection and supervisory roles in scrap industry

Scrap Inspectors focus on examining scrap materials for quality and compliance, while Scrap Supervisors oversee inspection teams and manage operations. Both roles require similar certifications and work in related environments, but the supervisor role includes leadership duties and higher responsibility levels.

More about Scrap Inspector jobs
Infographic showing various Scrap Inspector job openings in the United States as of May 2026, with employment types broken down into 58% Full Time, 16% Part Time, 23% Contract, and 3% Nights. Highlights an 97% Physical, and 3% Remote job distribution.

$18/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 7 days ago


Job description

Position Overview:

Blue Island Recycling is seeking a safety-driven, detail-oriented Scrap Inspector focused on incoming materials, peddler transactions, and appliance processing. This role is responsible for inspecting all inbound materials to ensure compliance with company policies as well as federal, state, and local regulations before acceptance. The Scrap Inspector is the first line of defense for yard safety, material quality, and compliance and is responsible for maintaining safe and efficient traffic flow while communicating clearly with customers, truck drivers, and other employees.

Key Responsibilities:Safety and Compliance (Primary Focus):
  • Inspect all incoming scrap at the scale, peddler area, and unloading zones
  • Identify and stop entry of prohibited or hazardous materials, including sealed or pressurized containers, propane tanks, lithiumion batteries or hybrid components, and improperly handled appliances
  • Enforce safety policies and take immediate action on unsafe loads
  • Isolate, document, and report hazardous or rejected materials
  • Maintain clean, organized, and hazardfree receiving areas
  • Incoming Scrap Inspection and Acceptance:
  • Evaluate incoming materials to verify grade, type, and quality
  • Make accept, reject, or downgrade decisions on loads and peddler material
  • Identify contamination and communicate with scale and yard personnel
  • Direct materials to the proper unloading and processing locations
  • Enter and maintain accurate inspection and load information in company systems
  • Traffice Control and Yard Flow:
  • Guide traffic in and out of the yard to maintain safe and efficient flow
  • Communicate with the scale house and operators to coordinate unloading
  • Ensure materials are unloaded in designated areas safely and efficiently
  • Peddler Interaction and Customer Handling:
  • Work directly with peddlers brining in scrap
  • Clearly explain acceptance or rejection decisions in a professional buy firm manner
  • Ensure materials are properly sorted and unloaded in designated areas
  • Handle disagreements with customers while maintaining control and enforcing company standards
  • Uphold company grading and safety requirements at all times
  • Freon Recovery and Appliance Handling:
  • Safely recover Freon or refrigerants from appliances following company procedures
  • Use proper PPE and required safety equipment
  • Ensure appliance are properly processed before entering the scrap stream
  • Identify imporperly prepared appliances and take corrective action
  • Maintain compliance with environmental regulations related to refrigerants
  • Additional Duties:
  • Attend meetings and complete required training
  • Perform other related duties as assigned by management
  • Required Qualifications:
  • Bilingual (English/Spanish)
  • Strong commitment to safety enforcement with no exceptions
  • Ability to identify scrap materials and recognize hazards quickly
  • Willingness to perform Freon recovery and appliance processing
  • Ability to make firm decisions and stand behind them with drivers and customers
  • Strong communication skills and ability to handle confrontational situations
  • Ability to work in an outdor industrial environment in all weather conditions
  • Preferred Qualifications:
  • Prior experience in scrap metal, recycling, or industrial operations
  • Knowledge of ferrous and nonferrous materials
  • Experience identifying hazardous materials such as batteries, pressurized containers, and refigerants
  • Experience working with peddlers or customers in a yard setting
  • Two or more years of scrap handling or inspection experience
  • Key Competencies:
  • Ability to communicate effectively in a professional manner
  • Ability to communicate using hand signals and twoway radios
  • Ability to learn and apply laws and regulations governing scrap purchasing
  • Ability to make decisions regarding material quality in accordance with company policies
  • Ability to use a tablet, pen and paper, or system to enter information efficiently
  • Ability to maintain a safe and clean work environment
  • Education and Experience:
  • High School diploma or GED required
  • Knowledge of ferrous and nonferrous metals preferred
  • Scrap yard experience preferred
  • Physical Requirements:
  • Ability to stand and walk for extended periods on uneven surfaces
  • Ability to lift, carry, push, or pull up to 50 pounds
  • Regular exposure to outdoor conditions including extreme temperatures, dust, noise, and industrial hazards
  • Work Environment:
  • Outdoor scrap yard focused on receiving and peddler areas
  • Frequent interaction with truck drivers, peddlers, and heavy equipment
  • PPE required at all times and provided by company
  • Benefits:
  • Competitive pay based on experience
  • Health, dental, vision, and life insurance options
  • Paid time off and company holidays
  • 401(k) / retirement plan
  • Weekly pay
  • Overtime opportunities
  • Opportunities for advancement within a growing operation
  • Ongoing training and development
  • Stable, fulltime wsork in a safetyfocused environment
  • Additional Information:

    Blue Island Recycling, LLC is an Equal Opportunity Employer and maintains a drug-free workplace.