ZipRecruiter

Log In

1

Rf Testing Engineer Jobs in Fort George G Meade, MD

Prolim Global

Engineer Systems Test 2

Baltimore, MD · On-site

Engineer Systems Test 2 * Location: 7323 Aviation Boulevard-SAFIII, Baltimore, MD 21240 * Work ... Integration Testing * MATLAB * Understanding of RF systems and RADAR concepts * Ability to execute ...

InterImage

System Engineer

Fort George G Meade, MD · On-site

RF Engineering - At least 10 years of experience on microwave systems, microwave collection, proficient on RF testing such as low-noise amplifiers, filters, combiners, bias-tee, integration of ...

InterImage

System Engineer

Fort George G Meade, MD · On-site

... RF testing such as low-noise amplifiers, filters, combiners, bias-tee, integration of antennas ... Perform systems engineering activities and assist in the preparation of a work product in Technical ...

Actalent

Rf Engineer

Hyattsville, MD · On-site

RF Engineer This role focuses on developing advanced Army-related capabilities in radio frequency ... Comfort working in Linux environments for development, testing, and deployment of embedded and ...

Actalent

Rf Engineer

Hyattsville, MD · On-site

RF Engineer This role focuses on developing advanced Army-related capabilities in radio frequency ... Comfort working in Linux environments for development, testing, and deployment of embedded and ...

Prolim Global

Engineer Digital 2

Baltimore, MD · On-site

The ideal candidate will have strong experience in RF testing, digital hardware troubleshooting, failure analysis, and production support, along with the ability to collaborate across engineering ...

Helsing

Senior RF Engineer

Washington, DC · On-site

As an RF Engineer for Communications and Networking, you will work in one of the most contested ... Obtain US FCC spectrum approvals and manage frequency coordination for testing and operational use ...

Helsing

Senior RF Engineer

Washington, DC · On-site

As an RF Engineer for Communications and Networking, you will work in one of the most contested ... Obtain US FCC spectrum approvals and manage frequency coordination for testing and operational use ...

Cymertek

RF Engineer

Annapolis Junction, MD · On-site

RF Engineer LOCATION Annapolis Junction, MD 20701 CLEARANCE TS/SCI Full Poly (Please note this ... Antenna testing and calibration * Signal propagation analysis * Understanding of modulation ...

previous pagenext page

Showing results 21-40

All JobsRf Testing Engineer JobsRf Testing Engineer Jobs in Fort George G Meade, MD

Rf Testing Engineer information

See Fort George G Meade, MD salary details

$41K

$130.5K

$203K

How much do rf testing engineer jobs pay per year?

As of Aug 23, 2026, the average yearly pay for rf testing engineer in Fort George G Meade, MD is $130,511.00, according to ZipRecruiter salary data. Most workers in this role earn between $108,100.00 and $154,200.00 per year, depending on experience, location, and employer.

What is an RF testing engineer?

RF Testing Engineers are professionals who specialize in testing and evaluating radio frequency (RF) systems and devices, such as antennas, wireless communication equipment, and electronic circuits. They use specialized tools and equipment to measure performance parameters like signal strength, interference, and compliance with regulatory standards. Their work is essential in industries like telecommunications, aerospace, and consumer electronics to ensure reliable and safe wireless communication. RF Testing Engineers analyze test results, troubleshoot issues, and help in designing solutions to optimize system performance.

What skills and qualifications are needed to be an RF testing engineer?

To thrive as an RF Testing Engineer, you need a solid understanding of radio frequency theory, circuit analysis, and experience with test methodologies, often backed by a degree in electrical engineering or a related field. Proficiency with RF testing equipment such as spectrum analyzers, network analyzers, and signal generators, along with relevant certifications like ISTQB or FCC compliance knowledge, is typically required. Attention to detail, analytical thinking, and effective communication are crucial soft skills for troubleshooting and collaborating with cross-functional teams. These skills ensure accurate testing, regulatory compliance, and the reliable performance of RF products in complex environments.

What challenges do RF testing engineers face during product validation, and how are they addressed?

RF Testing Engineers often encounter challenges such as signal interference, equipment calibration issues, and maintaining test accuracy in dynamic environments. To address these, engineers meticulously set up controlled testing environments, regularly calibrate equipment, and collaborate closely with design and hardware teams to troubleshoot unexpected results. Staying updated on the latest testing standards and participating in cross-functional reviews also help ensure reliable and repeatable results throughout the validation process.

What is the difference between Rf Testing Engineer vs Rf Test Technician?

AspectRf Testing EngineerRf Test Technician
QualificationsBachelor's degree in Electrical Engineering or related field, certifications like RF or EMC testingAssociate degree or technical diploma, hands-on training in RF testing
Work EnvironmentDesign labs, R&D departments, testing facilitiesTesting labs, manufacturing floors, field testing sites
ResponsibilitiesDesign test plans, analyze RF performance, troubleshoot issues, develop testing proceduresSet up testing equipment, perform tests, record data, maintain test setups

In summary, Rf Testing Engineers focus on designing and analyzing RF tests, requiring higher education and analytical skills, while Rf Test Technicians handle hands-on testing and equipment setup. Both roles are essential in RF testing environments but differ in scope and responsibilities.

Is RF testing engineering in demand?

RF testing engineering is in demand due to the growth of wireless communication, 5G technology, and IoT devices. Professionals in this field with skills in signal analysis, test equipment, and certifications like RF test standards are sought after by electronics and telecommunications companies.
Rf Testing Engineer jobs near you
Infographic showing various Rf Testing Engineer job openings in Fort George G Meade, MD as of August 2026, with employment types broken down into 1% As Needed, 85% Full Time, 10% Part Time, and 4% Contract. Highlights an 89% Physical, 2% Hybrid, and 9% Remote job distribution, with an average salary of $130,511 per year, or $62.7 per hour.

RF Test and Development Engineer

PROLIM Global Corporation

Baltimore, MD • On-site

Full-time

Re-posted 12 days ago

Job description

PROLIM Global Corporation (www.prolim.com) is currently seeking an RF Test and Development Engineer for our client Northrop Grumman at location Baltimore, Maryland, United States (Onsite).
[Job Description:]
Description Of Services
  • The RF Test and Development Engineer will support the development, integration, and testing of production hardware, with activities ranging from hands-on testing and troubleshooting to analysis of failure trends and root cause/corrective actions.
  • Duties include designing, developing, and implementing testing methods and equipment, troubleshooting RF and digital hardware, supporting First Time Through Test Yield (FTTTY), and analyzing test data to identify early trends.
  • This role requires collaborating with design engineering to develop hardware improvements, supporting technicians through troubleshooting and training, monitoring product yields, and attending program meetings to report findings.
  • The ideal candidate will interface with manufacturing management, test technicians, production engineers, and program support teams while maintaining a working knowledge of RF theory and digital circuit design.

Skills/Experience
RF Test and Development Engineer Level:
  • Bachelor's degree in electrical engineering or related STEM field with 2+ years of experience; or Master's degree -- (Required)
  • Experience reading and interpreting specifications, schematics, and block diagrams -- (Required)
  • Experience with RF hardware and software -- (Required)
  • Experience with RF test equipment (oscilloscope, power meter, spectrum analyzer, signal generator) -- (Required)
  • Current, active DoD Secret level clearance -- (Required)
  • U.S. citizenship -- (Required)

Principal RF Test and Development Engineer Level:
  • Bachelor's degree in electrical engineering or related STEM field with 5+ years of experience; or Master's degree with 3+ years of experience -- (Required)
  • Experience reading and interpreting specifications, schematics, and block diagrams -- (Required)
  • Experience with RF hardware and software -- (Required)
  • Experience with RF test equipment (oscilloscope, power meter, spectrum analyzer, signal generator) -- (Required)
  • Current, active DoD Secret level clearance -- (Required)
  • U.S. citizenship -- (Required)

Preferred Qualifications for both levels:
  • Advanced degree in Engineering or related STEM discipline
  • Experience with FPGA
  • Experience with Lab Windows CVI, C/C++ programming
  • Test Stand programming experience
  • Experience with digital, analog, RF test equipment, RF theory, and high-speed digital
  • Experience with differential digital interfaces like LVDS
  • PXI/PXIe and VME bus experience
  • Hands-on troubleshooting of electrical hardware

Apply online for immediate consideration, please send your updated resume, and contact info via email subhas.pujar@prolim.com
About PROLIM Corporation
PROLIM is a leading provider of end-to-end IT, PLM and Engineering Services and Solutions for Global 1000 companies. They understand business as much as technology, and help their customers improve their profitability and efficiency by providing high value technology consulting, staffing, and project management outsourcing services.
Their IT and PLM consulting offerings include; Advisory, PLM Software/Services, Program Management, Solution Architecture Training/Staffing, Cloud Solutions, Servers/Networking, Infrastructure, ERP Practices and QA Services. Engineering services include Data Translation, CAD/CAM/CAE, Process & Product Engineering, Prototyping, and Testing/Validation within a wide range of markets and industries.

Apply