ZipRecruiter

Log In

1

Rf Module Design Engineer Jobs in Louisville, KY

Samtec

Product Design Engineer

New Albany, IN · On-site

$119K - $143K/yr

... RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are ... Engineering Design Software: SolidWorks, AutoCAD, etc. * Simulation Software: FEA, CFD/Thermal ...

Samtec, Inc

Connector Product Design Engineer

New Albany, IN · On-site +1

$119K - $143K/yr

... RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are ... Senior Product Design Engineer Location: New Albany, IN (Preferred) Also open to Harrisburg, PA;

Samtec, Inc

Connector Product Design Engineer

New Albany, IN · On-site +1

$119K - $143K/yr

... RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are ... Senior Product Design Engineer Location: New Albany, IN (Preferred) Also open to Harrisburg, PA;

samtec

Connector Product Design Engineer

New Albany, IN · On-site

$119K - $143K/yr

... RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are ... Senior Product Design Engineer Location: New Albany, IN (Preferred) Also open to Harrisburg, PA;

Raytheon

Senior Electrical Design Engineer

Louisville, KY · On-site

$99K - $134K/yr

The Shipboard Effectors Department is currently searching for a Senior Electrical Design Engineer ... Radio Frequency (RF) and Electromagnetic coursework and/or laboratory * Knowledge of high-level ...

next page

Showing results 1-20

All JobsRf Module Design Engineer JobsRf Module Design Engineer Jobs in Louisville, KY

Rf Module Design Engineer information

See Louisville, KY salary details

$69.7K

$124.9K

$162.9K

How much do rf module design engineer jobs pay per year?

As of Jul 6, 2026, the average yearly pay for rf module design engineer in Louisville, KY is $124,905.00, according to ZipRecruiter salary data. Most workers in this role earn between $105,700.00 and $140,300.00 per year, depending on experience, location, and employer.

What does an RF Module Design Engineer do?

An RF Module Design Engineer specializes in designing, developing, and testing radio frequency (RF) modules used in a variety of wireless communication devices. They are responsible for creating circuit layouts, selecting components, and ensuring the modules meet performance, reliability, and regulatory standards. Their work often involves simulation, prototyping, and troubleshooting to optimize signal integrity and minimize interference. RF Module Design Engineers collaborate closely with hardware, software, and testing teams to integrate their modules into larger systems. This role is essential in industries such as telecommunications, aerospace, and consumer electronics.

What is the difference between Rf Module Design Engineer vs RF System Engineer?

AspectRf Module Design EngineerRF System Engineer
CredentialsBachelor's or Master's in Electrical Engineering, RF certificationsBachelor's or Master's in Electrical or RF Engineering, RF certifications
Work EnvironmentDesign labs, R&D departments, manufacturing facilitiesSystem integration labs, testing environments, R&D teams
Industry UsageWireless device manufacturing, telecom, consumer electronicsWireless networks, telecom infrastructure, system-level design

Both roles require strong RF engineering knowledge and similar educational backgrounds. The Rf Module Design Engineer focuses on designing and developing RF modules, while the RF System Engineer works on integrating RF components into complete systems. Understanding these differences helps in choosing the right career path or job search focus.

What are the key skills and qualifications needed to thrive as an RF Module Design Engineer, and why are they important?

To thrive as an RF Module Design Engineer, you need strong expertise in RF circuit design, electromagnetic theory, and a relevant engineering degree, such as electrical or electronics engineering. Familiarity with tools like ADS, HFSS, and network analyzers, plus knowledge of industry standards and certifications such as IPC, is highly valued. Attention to detail, problem-solving abilities, and effective communication are crucial soft skills for collaborating with cross-functional teams and troubleshooting complex issues. These competencies ensure the development of high-performance, reliable RF modules that meet stringent industry requirements.

What are some common challenges faced by RF Module Design Engineers during the product development cycle?

RF Module Design Engineers often encounter challenges such as minimizing interference and signal loss, ensuring compliance with international wireless standards, and integrating modules into compact device enclosures without sacrificing performance. Balancing trade-offs between power consumption, cost, and performance is also a frequent consideration. Collaboration with cross-functional teams, such as PCB layout engineers and system architects, is essential to address these challenges and deliver robust, manufacturable designs.
What are popular job titles related to Rf Module Design Engineer jobs in Louisville, KY? For Rf Module Design Engineer jobs in Louisville, KY, the most frequently searched job titles are:
What cities near Louisville, KY are hiring for Rf Module Design Engineer jobs? Cities near Louisville, KY with the most Rf Module Design Engineer job openings:
Rf Module Design Engineer jobs near you
Product Design Engineer

Product Design Engineer

Samtec

New Albany, IN • On-site

$119K - $143K/yr

Other

This job post has expired today. Applications are no longer accepted.

Samtec rating

8.4

Company rating: 8.4 out of 10

Based on 8 frontline employees who took The Breakroom Quiz

22nd of 141 rated electronics manufacturers

Job description

Samtec, Inc
Founded in 1976, Samtec is a privately held, $950 million global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec's global presence enables its unmatched customer service. 
THIS POSITION WILL BE LOCATED ONSITE AT SAMTEC - NEW ALBANY, IN

Summary/Objective:  The Product Engineer designs and develops within New Product or Sustaining Product Engineering. 

Essential Functions/ Responsibilities: 
  1. Developing & writing the Engineering inputs for technical documentation; and adhere to all corporate engineering standards including but not limited to documentation, file management, part modeling, and part simulation.
  2. Works directly with Marketing and Sales to review opportunities and develop engineering cost analyses based on Product Scopes, work directly with purchasing, quality, manufacturing engineering, test engineering, process engineering, electroplating, suppliers, and other necessary groups as a cross-functional team to develop products and solutions.
  3. Make significant contributions to design, development, and validation of connector solutions (including but not limited to board, cable, power, high speed, and panel mount products).
  4. Works hands on to identify problems during new product development and/or when quality concerns arise.
  5. Effective use of Office365 including Outlook, Excel, PPT, SharePoint, etc. 
  6. Work effectively with different levels and individuals inside and outside of the organization.
"The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities" 
Required Experience 
  1. 10+ Year's experience in connector design/manufacturing required. 
    • Component, assembly design, and manufacturing experience may be consider in lieu of this. 
  2. Engineering Design Software: SolidWorks, AutoCAD, etc. 
  3. Simulation Software: FEA, CFD/Thermal Modeling, etc. is preferred, but not required. 
  4. Must be able to handle multiple projects simultaneously as priorities can change quickly. 
  5. Must have excellent communication, collaboration, and organizational skills. 
  6. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs.
Preferred Education:
  1. Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or equivalent is required

What Samtec employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

SAMTEC logo

About SAMTEC

Sourced by ZipRecruiter

Industry

Electrical equipment, appliance, and component manufacturing

Company size

1,001 - 5,000 Employees

Headquarters location

New Albany, IN, US

Year founded

1976

Social media

FacebookTwitter

View All SAMTEC Jobs

Apply