1

Rf Module Design Engineer Jobs in Arizona (NOW HIRING)

Design, test, and integrate RF sensors and subsystems across frequencies from MHz through ... modules, and/or monolithic microwave integrated circuits (MMICs). * Experience performing Link ...

Work in a lab to accomplish component characterization as well as module verification and ... Experience with RF design and fabrication * Experience with RF testing and troubleshooting

Work in a lab to accomplish component characterization as well as module verification and ... Experience with RF design and fabrication * Experience with RF testing and troubleshooting

RF SoC System Timing Design And Validation Engineer Job Responsibilities: Help guide chip design for proper system timing and synchronization of the interactions between system components such as PLL ...

RF SoC System Timing Design And Validation Engineer Job Responsibilities: Help guide chip design for proper system timing and synchronization of the interactions between system components such as PLL ...

Outside of RF Design tasks, you may be involved in traffic engineering for the region. Understanding triggers and prioritization of solutions is beneficial Must-Have Skills: * Four or more years of ...

next page

Showing results 1-20

Rf Module Design Engineer information

What does an RF Module Design Engineer do?

An RF Module Design Engineer specializes in designing, developing, and testing radio frequency (RF) modules used in a variety of wireless communication devices. They are responsible for creating circuit layouts, selecting components, and ensuring the modules meet performance, reliability, and regulatory standards. Their work often involves simulation, prototyping, and troubleshooting to optimize signal integrity and minimize interference. RF Module Design Engineers collaborate closely with hardware, software, and testing teams to integrate their modules into larger systems. This role is essential in industries such as telecommunications, aerospace, and consumer electronics.

What is the difference between Rf Module Design Engineer vs RF System Engineer?

AspectRf Module Design EngineerRF System Engineer
CredentialsBachelor's or Master's in Electrical Engineering, RF certificationsBachelor's or Master's in Electrical or RF Engineering, RF certifications
Work EnvironmentDesign labs, R&D departments, manufacturing facilitiesSystem integration labs, testing environments, R&D teams
Industry UsageWireless device manufacturing, telecom, consumer electronicsWireless networks, telecom infrastructure, system-level design

Both roles require strong RF engineering knowledge and similar educational backgrounds. The Rf Module Design Engineer focuses on designing and developing RF modules, while the RF System Engineer works on integrating RF components into complete systems. Understanding these differences helps in choosing the right career path or job search focus.

What are the key skills and qualifications needed to thrive as an RF Module Design Engineer, and why are they important?

To thrive as an RF Module Design Engineer, you need strong expertise in RF circuit design, electromagnetic theory, and a relevant engineering degree, such as electrical or electronics engineering. Familiarity with tools like ADS, HFSS, and network analyzers, plus knowledge of industry standards and certifications such as IPC, is highly valued. Attention to detail, problem-solving abilities, and effective communication are crucial soft skills for collaborating with cross-functional teams and troubleshooting complex issues. These competencies ensure the development of high-performance, reliable RF modules that meet stringent industry requirements.

What are some common challenges faced by RF Module Design Engineers during the product development cycle?

RF Module Design Engineers often encounter challenges such as minimizing interference and signal loss, ensuring compliance with international wireless standards, and integrating modules into compact device enclosures without sacrificing performance. Balancing trade-offs between power consumption, cost, and performance is also a frequent consideration. Collaboration with cross-functional teams, such as PCB layout engineers and system architects, is essential to address these challenges and deliver robust, manufacturable designs.
What cities in Arizona are hiring for Rf Module Design Engineer jobs? Cities in Arizona with the most Rf Module Design Engineer job openings:
Senior RF Subsystems Engineer

Senior RF Subsystems Engineer

Raytheon

Phoenix, AZ

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 5 days ago


Raytheon rating

9.1

Company rating: 9.1 out of 10

Based on 95 frontline employees who took The Breakroom Quiz

4th of 527 rated manufacturers


Job description

Date Posted:

2026-06-15

Country:

United States of America

Location:

US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Effector RF Team at Raytheon is seeking a talented Senior Engineer to join our team in Tucson, AZ.

The candidate will be responsible for contributing to the analysis, design, and implementation of RF subsystems and sensors within missile products. The selected candidate will be expected to contribute RF subsystem/sensor support as part of an interdisciplinary team.

This position is an onsite role, located in Tucson, AZ.

What You Will Do

  • Design, test, and integrate RF sensors and subsystems across frequencies from MHz through millimeter-wave.

  • Support the decomposition of system-level requirements into detailed RF component requirements.

  • Measure RF components/sensors/subsystems, including performance in chamber and range environments.

  • Perform modeling and analysis of link budgets, RF cascades, electromagnetic emissions (EME), antenna patterns, phase noise, receiver sensitivity, transmitter power, spurious signals, modulation, isolation, and ADC characteristics.               

Qualifications You Must Have

  • Bachelor of Science degree in Technology, Engineering, or Mathematics (STEM)

  • A minimum of 5 years of prior relevant experience, or an advanced degree in a related field and minimum 3 years of experience to include any combination of the following:

    • Design, integration, and/or test of RF subsystems

    • Design, integration, and/or test of RF sensors

    • Experience interacting across engineering disciplines (e.g. Systems, Mechanical, SW, Algorithms, etc.) to define RF subsystem requirements and evaluate performance

  • Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date with the ability to obtain special program access after start.   

Qualifications We Prefer

  • Knowledge of RF component technologies, including circuit card assemblies (CCAs), waveguides, planar/printed antennas, RF modules, and/or monolithic microwave integrated circuits (MMICs).

  • Experience performing Link Budget analyses.

  • Understanding of antenna patterns and RF measurements with antennas and electronics.

  • Experience in concepts such as phase noise, mixer conversion spurs, automatic gain control (AGC), sensitivity, intermodulation distortion (IMD), bit error rate, instantaneous bandwidth, adjacent channel interference, and ADC measurements/calculations (Nyquist and SFDR).

  • Familiarity with equipment such as Spectrum Analyzers, Network Analyzers, Signal Generators, and Arbitrary Waveform Generators (ARB Generators).

  • Understanding of electromagnetic interference (EMI) and electromagnetic vulnerability (EMV) along with mitigation strategies in RF systems.

  • Excellent written communication and oral presentation skills.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: https://www.state.gov/m/ds/clearances/c10978.htm

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms


What Raytheon employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom