ZipRecruiter

Log In

1

Rf Assembler Jobs (NOW HIRING)

Lynk

RF/Electrical Engineer

Chantilly, VA · On-site

While playing with all this hardware on a bench, you'll probably need to pick up a soldering gun, use a spectrum analyzer, assemble circuits on a breadboard, and/or configure an RF channel simulator.

Milwaukee Tool

Assembler - 1st Shift

Greenwood, MS · On-site

$13.75 - $17.25/hr

GWD Assembler 1 Title: Assembler 1 Job Code: Department: Paint, Print, Pack The Assembler 1 is ... Duties and Responsibilities Build kits and packages per SWS sheet Operate RF sealer per SWS sheet ...

Lynk

RF Systems Test Engineer

Chantilly, VA · On-site

... assemble circuits on a breadboard, use an oscilloscope, vector network analyzer, and spectrum ... As an RF Systems Test Engineer you will be expected to understand every detail of this complex ...

MKS Instruments, Inc.

Assembler - Hiring Now

Rochester, NY · On-site

$14.72 - $24.53/hr

You Will Make an Impact By: • Repair and build RF generators to a final assembly. • Your role will involve following assembly instructions and utilizing a range of hand tools to complete tasks ...

Kaizen Stackup

RF Engineer

Kennesaw, GA · On-site

Build & Validate Systems Assemble hardware, integrate mechanical positioners and scanners, perform calibration, and verify system performance. * Solve Complex Measurement Problems Debug RF ...

previous page

Showing results 41-60

All JobsRf Assembler Jobs

Rf Assembler information

See salary details

$11

$17

$22

How much do rf assembler jobs pay per hour?

As of Aug 7, 2026, the average hourly pay for rf assembler in the United States is $17.45, according to ZipRecruiter salary data. Most workers in this role earn between $15.38 and $19.23 per hour, depending on experience, location, and employer.

What is the difference between Rf Assembler vs Electronics Technician?

AspectRf AssemblerElectronics Technician
Required CertificationsTypically none or basic certificationsOften requires certifications like A+ or CompTIA
Work EnvironmentManufacturing and assembly linesRepair, testing, and maintenance labs or field
Industry UsageTelecommunications, aerospace, defenseElectronics manufacturing, service, and repair

Rf Assemblers focus on assembling radio frequency components, often working in manufacturing settings with minimal certifications. Electronics Technicians have broader roles involving testing, troubleshooting, and repairing electronic systems, usually requiring certifications. While both work in electronics-related industries, their daily tasks and skill sets differ significantly.

What is an RF assembler?

An RF Assembler is a skilled technician who specializes in assembling, testing, and repairing radio frequency (RF) components and devices, such as antennas, circuit boards, cables, and transmitters. They work with small electronic parts, follow detailed blueprints or schematics, and use specialized tools to ensure precise assembly. RF Assemblers are commonly employed in industries like telecommunications, aerospace, and defense, where quality and accuracy are critical. Their work supports the manufacturing and functionality of equipment that relies on RF technology.

What are some common challenges faced by RF assemblers, and how can new hires prepare to overcome them?

RF Assemblers often encounter challenges such as handling delicate components, maintaining strict quality standards, and interpreting complex assembly instructions or schematics. New hires can prepare by developing strong attention to detail, familiarizing themselves with soldering techniques, and learning about electrostatic discharge (ESD) safety procedures. Collaborating effectively with engineers and quality assurance teams is also essential for troubleshooting and ensuring assemblies meet performance specifications.

What are the key skills and qualifications needed to thrive as an RF assembler?

To thrive as an RF Assembler, you need strong manual dexterity, attention to detail, and experience with soldering, cable assembly, and reading technical schematics, often supported by a high school diploma or equivalent. Familiarity with RF testing equipment, microscopes, and industry-standard assembly tools is typically required. Precision, teamwork, and the ability to follow detailed instructions are essential soft skills for this role. These skills ensure the reliable assembly and performance of complex RF components, which are critical for meeting quality standards in electronics manufacturing.
More about Rf Assembler jobs
What states have the most Rf Assembler jobs? States with the most job openings for Rf Assembler jobs include:
What job categories do people searching Rf Assembler jobs look for? The top searched job categories for Rf Assembler jobs are:
Rf Assembler jobs near you
Infographic showing various Rf Assembler job openings in the United States as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $36,287 per year, or $17.4 per hour.

RF/Electrical Engineer

Lynk

Chantilly, VA • On-site

Full-time

Re-posted 13 days ago

Job description

About Lynk
Lynk is the inventor of satellite direct to device or D2D technology, and has the world's only commercial license from the FCC to operate a commercial D2D system. Today, Lynk allows mobile network operators' subscribers to send and receive text messages to and from space via standard unmodified, mobile devices. Lynk's service has been tested and proven on all seven continents, has regulatory approvals in more than 30 countries and is currently being deployed commercially based on more than 40 MNO commercial service contracts covering approximately 50 countries.
Our technology will enable all 8 billion people on the planet to stay connected with the existing standard phone in their pocket. Everywhere. No matter what.
By joining Lynk, you will have the opportunity to directly touch the lives of billions. Your mission will be to bring mobile broadband to billions, pull hundreds of millions out of poverty, and save countless lives.
Job Summary
As an RF/Electrical Engineer at Lynk, you will be responsible for wearing many hats in the world of radio frequencies, electronics, hardware, and software. You will be responsible for the analysis, design, implementation, optimization and enhancement of our nanosatellite communications payload, and, ultimately, the future constellation network. Some work products will include link budgets analyses, system dimensioning for coverage and capacity including traffic analysis and simulation, initial system design and dimensioning, coverage planning, frequency planning, interference analysis and mitigation techniques. This engineer will also be responsible for supporting the iterative design and test of our nanosatellite payload hardware/electronics and software. This will include working with software defined radios, single-board computers, FPGAs, SoCs, processors, LNAs, and filters - you will also be involved in our payload antenna selection and design. While playing with all this hardware on a bench, you'll probably need to pick up a soldering gun, use a spectrum analyzer, assemble circuits on a breadboard, and/or configure an RF channel simulator.
If you enjoy the challenge of wearing many hats and have a track record of creative thinking to solve unconventional problems, then we look forward to meeting you!
Core Responsibilities
Because Lynk is a small company, the RF/Electrical Engineer will be responsible for straddling engineering work in the domains of RF, electrical, mechanical, and software engineering.
  • Support design of spacecraft payload hardware, including single-board computers, SDRs, FPGAs, SoCs, processors, LNAs, filters, amplifiers, etc., and software design and development.
  • Support selection and design of nanosatellite antenna technologies
  • Develop link budget analyses, simulations, traffic/capacity analysis, RF system design and dimensioning, coverage and frequency planning, etc.
  • Support spacecraft payload integration, testing, delivery to launch and spacecraft bus partners/vendors.
  • Designing and planning payload testing configurations on the ground when testing payload communications performance both in-lab and in-orbit.
  • Interface with Systems Engineering team to inform constellation/network architecture and design based on RF communications payload performance.
  • Bench level mechatronics work including testing, integration, assembly, programming and prototyping of electronics hardware and software.
  • Some software-based Systems Engineering analysis.
  • Supporting developing and maintaining technical documentation for payload design and development.
  • Must be able to work independently and in a team environment.

Qualifications
  • A Bachelor's degree or better in RF or Electrical Engineering.
  • Experience working on projects developing space payload hardware and software, preferably communications systems.
  • Hands-on experience with software-defined radios, antennas, FPGAs, GPUs, CPUs, SoCs, single-board computers, microcontrollers is highly desired.
  • Programming Proficiency in one or more programming languages is highly desired, such as, C++, C, Python, MATLAB, etc.
  • Should have experience working with Linux based systems.
  • Familiarity with VHDL or Verilog and Altera or Xilinx FPGAs is desired.
  • Proficiency with electrical design software, such as Altium is a plus.
  • Strong knowledge and understanding of RF air interfaces and their use of multiple access schemes such as TDMA, FDMA, OFDMA, CDMA, etc. is highly desired.
  • Hands-on experience with integrating hardware and software systems is desired.
  • Must be good with computers. Fluent in Linux, Windows, and Mac OSX, very capable with Microsoft Office... Excel, Project, PowerPoint, Word.
  • Hands-on experience with programming microcontrollers and SDRs is desired.
  • Knowledge of some communications/networking protocols, for instance, IP, TCP/IP, SNMP, SDH/SONET, Ethernet, Carrier Grade Ethernet, DSL, SS7, ISDN, Q2931, B-ISDN, X.25, 802.11, 802.16, SIP, TDMA, FDMA, CDMA, LTE, EDGE, GPRS, HSPA, GSM, etc.

ITAR Requirements
To comply with U.S. Government export control regulations (ITAR), applicants must be one of the following: (i) a U.S. citizen or national, (ii) a lawful permanent resident (green card holder), (iii) a refugee under 8 U.S.C. § 1157, or (iv) an asylee under 8 U.S.C. § 1158. Individuals who do not meet these criteria must be eligible to obtain the necessary authorizations from the U.S. Department of State. For more information, please refer to the ITAR guidelines.
Learn about ITAR here.
Job Location
Chantilly, VA

Apply