Remote Optical Manufacturing Engineer Jobs in Hawaii

Summary
This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.
Learn more about this agency
Duties
Help

• You will serve as an ELECTRICAL ENGINEER in the FACILITIES MANAGEMENT AND SUSTAINMENT DIV (N45), FACILITIES, MAINTENANCE and LOGISTICS MANAGEMENT DEPT (N4), at NAVAL COMPUTER AND TELECOMMUNICATIONS AREA MASTER STATION PACIFIC (NCTAMS PAC).
• You will serve as the NCTAMS PAC Regional Power Technical Representative.
• You will oversee operations and maintenance of emergency generators and uninterruptible power systems (UPS) for all activities in the NCTAMS PAC area of responsibility (AOR).
• You will evaluate assets, anticipate, and identify problem areas.
• You will conduct surveys and studies.
• You will plan, design and/or program projects to repair, upgrade or replace mission-critical power support equipment.
• You will develop and review statements of work.
• You will perform technical reviews and designs.
• You will be responsible for the operation and maintenance of the station-owned electrical distribution and emergency power system.
• You will create command-wide standardization of required operation and maintenance procedures for electrical power equipment and systems.

Requirements
Help
Conditions of employment

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain a current valid United States driver's license.
• You will be required to successfully complete a pre-appointment physical examination.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• MSP/PPP applicants must currently hold the required security clearance.
• You must successfully complete a Counterintelligence (CI) polygraph with No Deception Indicated (NDI).
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to obtain and maintain a U.S. Passport.

Qualifications
Applicants must meet the following Basic Education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
Note: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise.
In addition to the Basic Requirements Applicant for this position, you must have directly applicable experience that demonstrates the possession of knowledge, skills, abilities, and competencies necessary for immediate success in the position. Qualifying experience may have been acquired in any public or private sector job, but will clearly demonstrate past experience in the application of the particular competencies or knowledge, skills and abilities necessary to successfully perform the duties of the position. Such experience is typically in or directly related to the work of the position to be filled. Qualifying experience would be demonstrated by:
-Experience utilizing advanced techniques of electrical engineering for complex electrical distribution systems serving Communications Stations and Data Centers.
-Experience utilizing electrical power engineering, handling operations and maintenance of emergency generators, uninterruptible power supplies (UPS), breakers and related control systems.
-Experience managing budgeting, programming and acquisitions for the operation and maintenance of electrical power systems
-Experience leading and developing project formulation and supporting documentation for program repair, construction, and site preparation projects involving electrical distribution systems, emergency generators, UPS, antennas and Communications-Electronics (C-E) system installations.
This position is within the Work Category PROFESSIONAL at Work Level SENIOR, Series and Grade GG-0850-13.
Additional qualification information can be found from the following Office of Personnel Management: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/electrical-engineering-series-0850/
https://dodcio.defense.gov/Cyber-Workforce/CES.aspx
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following Basic Education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
Note: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise.
***NOTE: College Transcripts from an accredited University MUST be submitted to show proof the applicant meets ALL education requirements e.g., Basic. FAILURE TO SUBMIT TRANSCRIPTS/ITEMIZED LIST WILL RESULT IN AN INELIGIBLE RATING.
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Several vacancies may be filled.
Work requires some travel away from the normal duty station.
Pre-employment and annual medical examination/physical required and is a condition of employment.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
This position is subject to an initial drug screening, and random testing thereafter. A negative drug test result must be received by HR within 30 calendar days