ZipRecruiter

Log In

2

Remote Design Engineer Jobs in Charlottesville, VA

Sehinc

Controls Engineer

Charlottesville, VA · On-site +1

$90K - $125K/yr

This remote position can be located in the Charlottesville, VA area, or surrounding areas or Remote ... Prepare project design/bidding documents including P&ID drawings, system network drawings, controls ...

Investure

Software Engineer

Charlottesville, VA · On-site +1

$115K - $125K/yr

This position is based in-office with a remote option on Fridays. Investure will not sponsor H-1B ... Design, build, test, and maintain software applications that support investment, accounting ...

Investure

Software Engineer

Charlottesville, VA · On-site +1

$115K - $125K/yr

This position is based in-office with a remote option on Fridays. Investure will not sponsor H-1B ... Design, build, test, and maintain software applications that support investment, accounting ...

Amteck, LLC

BIM Technician - Electrical

Ivy, VA · On-site +1

Amteck, a nationally recognized Top 50 Electrical Design-Build Contractor, is redefining what it ... This position is eligible to be fully remote or for work out of our Lexington, KY HQ or our ...

next page

Showing results 1-20

All JobsDesign Engineer JobsRemote Design Engineer JobsRemote Design Engineer Jobs in Charlottesville, VA

Remote Design Engineer information

See Charlottesville, VA salary details

$17

$50

$72

How much do remote design engineer jobs pay per hour?

As of Aug 9, 2026, the average hourly pay for remote design engineer in Charlottesville, VA is $50.29, according to ZipRecruiter salary data. Most workers in this role earn between $38.89 and $61.30 per hour, depending on experience, location, and employer.

What does a remote design engineer do?

Remote design engineers work from home or a remote office, and depending on their specialty, may have a wide range of duties and responsibilities. For instance, as an electrical engineer, you use specialized tools and software to design and plan electrical systems, ranging from computer hardware to wide power grids. As an automotive design engineer, you translate ideas and consumer needs into usable products, or may even work on a team to design an entire vehicle line. As an industrial design engineer, you may assist in the development of consumer products, ranging from everything from kitchen gadgets to smartphones to modern furniture. In all cases, you work with a team of other designers and engineers, each contributing expertise to create a final product.

What is a remote design engineer?

A Remote Design Engineer is a professional who creates and develops product designs, systems, or structures while working from a location outside of a traditional office, often from home. They use computer-aided design (CAD) software and collaborate with teams via digital communication tools. Remote Design Engineers can work in various fields such as mechanical, electrical, or civil engineering, and are responsible for turning ideas into detailed technical plans. This role requires strong communication skills, technical expertise, and the ability to work independently. By working remotely, they can contribute to projects from virtually anywhere in the world.

How do remote design engineers effectively collaborate with teams across different time zones?

Remote Design Engineers often work with colleagues, clients, and stakeholders from various locations, making clear communication and effective collaboration essential. They typically use digital tools like project management platforms, video conferencing, and shared design software to synchronize work and provide updates. To overcome time zone differences, teams may schedule regular check-ins during overlapping hours and establish clear documentation practices so everyone stays informed. Being proactive in communication and flexible with meeting times can greatly improve teamwork and project success.

What are the key skills and qualifications needed to thrive as a remote design engineer?

To thrive as a Remote Design Engineer, you need strong expertise in engineering principles, CAD software proficiency, and a relevant engineering degree. Familiarity with tools like AutoCAD, SolidWorks, and collaborative project management platforms is typically required, along with certifications such as Professional Engineer (PE) where applicable. Exceptional communication, problem-solving, and self-motivation are essential soft skills for remote collaboration and project delivery. These skills and qualities are crucial for delivering accurate designs, meeting deadlines, and ensuring seamless teamwork in a remote environment.
More about Remote Design Engineer jobs
What are popular job titles related to Remote Design Engineer jobs in Charlottesville, VA? For Remote Design Engineer jobs in Charlottesville, VA, the most frequently searched job titles are:
What job categories do people searching Remote Design Engineer jobs in Charlottesville, VA look for? The top searched job categories for Remote Design Engineer jobs in Charlottesville, VA are:
What cities near Charlottesville, VA are hiring for Remote Design Engineer jobs? Cities near Charlottesville, VA with the most Remote Design Engineer job openings:
Remote Design Engineer jobs near you
Infographic showing various Remote Design Engineer job openings in Charlottesville, VA as of June 2026, with employment types broken down into 83% Full Time, 4% Part Time, and 13% Contract. Highlights an 38% Physical, 3% Hybrid, and 59% Remote job distribution, with an average salary of $104,598 per year, or $50.3 per hour.

Fire Protection Engineer (Remote or Hybrid)

Stantec

Charlottesville, VA • On-site, Remote

$107K - $160K/yr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 27 days ago

Stantec rating

8.5

Company rating: 8.5 out of 10

Based on 83 frontline employees who took The Breakroom Quiz

114th of 446 rated engineering

Job description


Take the first step towards designing your career with Stantec. As a professional services firm we are seeking a Fire Protection Engineer to complement our team. This person will work closely with local fire protection specialists as well as our team in Germany. We are better together. Full-time position reporting to the Charlottesville VA Office. We value flexibility-remote or hybrid work options may be available depending on the candidate and role requirements. Your role will include, but not limited to, serving as a technical authority to provide advisory, consultation, and professional judgement regarding fire protection concerns particularly on technically complex fire protection engineering related matters to appropriate individuals and regional management.
Your Key Responsibilities
  • Apply concepts of fire protection engineering through investigation and analysis to support engineering projects that may include design of fire suppression systems (sprinklers and standpipes, water supply, special hazard extinguishing systems), fire detection and alarm systems, and smoke control systems, selection of fire-resistant materials and assemblies, and development of egress strategies.
  • Perform calculations to analyze and design engineering system components using company standard software and proprietary manufacturer software.
  • Gather information to support design decisions.
  • Prepare engineering designs, drawings, specifications, presentations and reports with guidance from senior engineers.
  • Verify compliance with applicable codes and engineering standards and practices.
  • Work with other architecture and engineering design professionals in the coordination and delivery of projects under the direction of a senior engineer.
  • Provide support services during construction, including submittal reviews, response to requests for information and contract document clarifications, construction progress inspections and acceptance testing.
  • Perform other duties as assigned by senior engineering staff.
  • Responsible for all fire protection matters on assigned complex projects and for assuring that all matters conform to fire protection requirements in client's policies, regulations, and codes and standards.
  • Ensuring that assigned projects are technically correct for both design and construction and are consistent with the appropriate current practices in the industry; that they are within the technical and administrative constraints of the project and that they are fully coordinated and compatible with other engineering disciplines of the project.
  • Managing fire protection engineering portions of complex new construction or complex renovation projects and incorporate fire protection design practices into all phases of design and construction.
  • Where deficiencies are noted, this individual also directs necessary changes and furnishes assistance required.
  • Prepare and present technical reports and presentations.
  • Engages in the development of a design through sketches, electronic models, diagrams, and other visual formats.
  • Leads project coordination meetings with internal team members and/or external consultants, owner and contractor, subcontractors, and vendors.
  • Participates in client meetings, value analysis, and basic cost estimating.
  • Help develop staff skills and abilities by providing guidance and mentoring to strengthen technical abilities.
  • Conducts quality assurance and quality control on own projects and projects of peers.
  • Assists in the development of new standards and specifications for the engineering group.
  • Develops project scope, budgets, and design approach for all size projects.
  • Assists with Business Development activities, including proposal development, presentations, etc.
  • Oversees and manages multiple concurrent projects/tasks.

Qualifications
Your Capabilities and Credentials
  • Proficiency in Revit, sprinkler design addons (e.g. AutoSprink) for Revit, and hydraulic calculation software.
  • Experience with CFD modeling software (i.e. FDS, ASCOS) is preferred but not required.
  • Requisite knowledge, interpretation, and application of Building codes and NFPA standards. Familiarity with Unified Facilities Criteria (UFC) is preferred.
  • Strong knowledge of fire protection and fire alarm systems.
  • Checks the work of others for accuracy and completeness and manages time to meet project budget and schedule.
  • Participates and collaborates in project team setting with internal and external clients.
  • Strong technical writing, presentation and interpersonal skills.
  • Must have a valid driver's license with good driving record
  • Pre-employment drug screen is required for this position

Education and Experience
  • Bachelor's degree or equivalent in Engineering.
  • Minimum of 10 years of progressively responsible experience.
  • Experience as a Qualified Fire Protection Engineer (QFPE) on Federal projects preferred.
  • Must be a fully licensed Fire Protection Engineer in at least one US state or jurisdiction, preferably in the local jurisdiction, by passing the Fire Protection Engineering written examination.
  • Typical office environment working with computers and remaining sedentary for long periods of time.
  • Field work may include exposure to the elements including inclement weather.

This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice.
Stantec is a place where the best and brightest come to build on each other's talents, do exciting work, and make an impact on the world around us. At Stantec, we live our corporate values every day.
Join us and redefine your personal best."
#INDES
About the Team
Pay Transparency: In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week.
Benefits Summary: Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law).
Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law.
The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements

What Stantec employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply