SummaryClick on "Learn more about this agency" button below to view
Eligibilities being considered and other
IMPORTANT information.
The primary purpose of this position is: This is a formal Air Force intern position, established under the PALACE Acquire (PAQ) program which is under the Pathways Recent Graduate Program. This position is centrally managed and funded by the Air Force Personnel Center, Civilian Career Management Directorate and administered by the Civil Engineer Career Team.
Learn more about this agencyDutiesHelp
GS-810-07 (Civil Engineer)- Uses prescribed methods to perform specific, and limited work assignments that are normally minor phases of a broader assignment of a higher-grade engineer.
- Uses computers/computer software such as information management programs, computer aided design and drafting (CADD) programs, and project tracking programs to assist higher grade engineers in solving engineering problems and facilitate the work.
- Assists in coordinating projects with engineers in other disciplines or with architects.
- Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
GS-810-09 (Civil Engineer)- Participates in design work for new construction, renovations, and improvements to real property facilities including utility systems, utilizing a professional knowledge of civil engineering.
- Prepares or participates in the preparation of architect and engineer (A&E) statements of work (SOW).
- Coordinates projects with other engineers in other disciplines or with architects.
- Keeps abreast of emerging technologies to ensure programmed development will not prematurely become obsolete.
- In conjunction with the primary duty of engineering design, on a less frequent basis performs work in the construction management, programming/base development, and/or operations and maintenance (O&M) functions.
- Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
GS-0830-07 (Mechanical Engineer)- Uses prescribed methods to perform specific, and limited work assignments that are normally minor phases of a broader assignment of a higher-grade engineer.
- Uses computers/computer software such as information management programs, computer aided design and drafting (CADD) programs, and project tracking programs to assist higher grade engineers in solving engineering problems and facilitate the work.
- Assist in coordinating projects with engineers in other disciplines or with architects.
- Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
GS-0830-09 (Mechanical Engineer)- Participates in design work for new construction, renovations, and improvements to real property facilities, including utility systems, utilizing a professional knowledge of mechanical engineering.
- Prepares or participates in the preparation of architect and engineer (A&E) statements of work (SOW).
- Coordinates projects with other engineers in other disciplines or with architects.
- Keeps abreast of emerging technologies to ensure programmed development will not prematurely become obsolete.
- In conjunction with the primary duty of engineering design, on a less frequent basis performs work in the construction management, programming/base development, and/or operations and maintenance (O&M) functions.
- Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
GS-0850-07 (Electrical Engineer)- Uses prescribed methods to perform specific, and limited work assignments that are normally minor phases of a broader assignment of a higher-grade engineer.
- Uses computers and computer software such as information management programs, computer aided design and drafting (CADD) programs, and project tracking programs to assist higher grade engineers in solving engineering problems and facilitate the work.
- Assists in coordinating projects with engineers in other disciplines or with architects.
- Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
GS-0850-09 (Electrical Engineer)- Participates in design work for new construction, renovations, and improvements to real property facilities, including utility systems, utilizing a professional knowledge of electrical engineering.
- Prepares or participates in the preparation of architect and engineer (A&E) statements of work (SOW).
- Coordinates projects with other engineers in other disciplines or with architects.
- Keeps abreast of emerging technologies to ensure programmed development will not prematurely become obsolete.
- In conjunction with the primary duty of engineering design, on a less frequent basis performs work in the construction management, programming/base development, and/or operations and maintenance (O&M) functions.
- Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
RequirementsHelp
Conditions of employment- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- The salary range indicated in this announcement will be adjusted to include locality payment for selected duty location and/or series.
- If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
- This position is subject to provisions of the DoD Priority Placement Program
- Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
- Shift work and emergency overtime may be required
- Employee must maintain current certifications
- Disclosure of Political Appointments
- Advance in hire may be authorized if there is demonstrable proof provided on your resume
- Student Loan Repayment may be authorized
- Recruitment Incentive may be authorized for this position
- Please read this Public Notice in its entirety prior to submitting your application for consideration.
- Successful completion of all training and regulatory requirements as identified in the applicable training plan. Employee must maintain current certifications. May be required to obtain job-related certifications.
- Work may occasionally require travel away from the normal duty station on military or commercial aircraft.
- Direct Deposit: All federal employees are required to have direct deposit.
- Minimum GPA of 2.95 on a 4.0 grading scale.
- Must meet suitability for Federal employment. Required to obtain and maintain the appropriate security clearance.
- Required to serve a one year probationary period.
- Mobility - you may be required to relocate during or after completion of your training.
QualificationsIn order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, for Professional and Scientific Positions and Professional Engineering Positions,
0800 Basic Requirements:Combination of education and experience college-level education Degree: Engineering.
ORLeading to a bachelor's degree in a school of engineering with at least one program accredited by ABET;
ORInclude differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
ORTraining, and/or technical experience that furnish
1. A thorough knowledge of the physical and mathematical sciences underlying engineering.
2. A good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
You may qualify if you meet one of the following:
GS-07: You must have completed a 4-year course of study leading to a bachelor's from an accredited institution
AND must have documented Superior Academic Achievement (SAA) or one year of specialized experience equivalent to at least a GS-05 at the undergraduate level in one of the following:
A) Class Standing - upper third of the graduating class based on completed courses in the college, university, or major subdivision
B) Grade Point Average - 2.95 or higher out of a possible 4.0 as recorded on your official transcript or as computed based on 4 years of education or as computed based on courses completed during the final 2 years of curriculum; OR 3.45 or higher out of a possible 4.0 based on the average of the required courses completed in your major field or the required courses in your major field completed during the final 2 years of your curriculum. If more than 10 percent of total undergraduate credit hours are non-graded, i.e. pass/fail, CLEP, CCAF, DANTES, military credit, etc., you cannot qualify based on GPA
C) Election to membership in a national scholastic honor society (note: freshman honor society cannot be used to meet the requirements of this position). (If qualifying based on class standing or honor society membership, provide appropriate documentation).
GS-09:You have one full year (18 semester hours or the equivalent) of graduate level study, or possess a master's or higher degree, e.g., LL.B., J.D., LL.M., Ph.D., in a field that provided the knowledge, skills, and abilities to do the work of this position. Such fields include business administration, industrial management, industrial engineering, industrial psychology, public administration, political science, or government. (Submit copy of transcripts).
ORYou have at least one year (12 months) of specialized experience, that provided knowledge of to perform successfully the duties of the position. To be creditable, specialized experience must have been equivalent to at least the next lower qualifying pay band or equivalent grade under the General Schedule (GS) or other pay systems. Equivalent experience may be at the level of the lowest GS grade covered by the applicable pay band; however, the experience must demonstrate KSA's to successfully perform the duties of the position being filled.
ORYou must have a combination of graduate education as described above and the type of specialized experience as described above, which when combined would equate to 100%. (To compute, first determine your total qualifying graduate level education as a percentage of the graduate education required; then determine your total qualifying experience as a percentage of experience described above; add the two percentages. The total percentage must equal to at least 100%.) (Submit a copy of your transcript.)
AND Grade Point Average - 2.95 or higher out of a possible 4.0 as recorded on your official transcript or as computed based on 4 years of education or as computed based on courses completed during the final 2 years of curriculum; OR 3.45 or higher out of a possible 4.0 based on the average of the required courses completed in your major field or the required courses in your major field completed during the final 2 years of your curriculum. If more than 10 percent of total undergraduate credit hours are non-graded, i.e. pass/fail, CLEP, CCAF, DANTES, military credit, etc., you cannot qualify based on GPA
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:0810-07 (Civil Engineer)- Professional knowledge of civil engineering concepts and principles of standard engineering practices.
- Skill in preparing graphs, curves, or tables.
- Ability to search technical reports, manufacturers' catalogs, and other guidelines to obtain information.
- Ability to use relevant software programs and use computer aided design and drafting (CADD) programs.
- Ability to work cooperatively as a team member in the design of facility projects.
- Ability to make calculations applying standard formulas: prepare graphs, curves, or tables: and record factual data in tests and observation studies.
0810-09 (Civil Engineer) - Professional knowledge of civil engineering concepts, principles, and practices.
- Knowledge of engineering and construction standards, methods, and practices.
- Knowledge of automated data processing concepts.
- Knowledge of health, safety, and environmental requirements in applicable regulations.
- Ability to analyze, interpret, and apply rules, regulations and procedures in a variety of situations and recommend timely and economical solutions.
- Ability to plan and organize work; coordinate with other engineering disciplines and architects.
0830-07 (Mechanical Engineer)- Professional knowledge of mechanical engineering concepts and principles and standard engineering practices.
- Skill in preparing graphs, curves, or...