Remote Chemical Engineer No Experience Jobs in Reston, VA

Summary
This vacancy is for a Chemical Engineer in the Chemical, Biological and Nuclear Division, Office of Nonproliferation and Treaty Compliance (NPTC), Office of the Assistant Secretary for Export Administration (OASEA), Bureau of Industry and Security (BIS) within the Department of Commerce.
Learn more about this agency
Duties
Help
As a Chemical Engineer, you will perform the following duties:
The duties described below are at the highest grade advertised. Duties assigned at lower grade levels will be of more limited scope, performed with less independence and limited complexity; duties will be commensurate with the grade of the selected employee.

• Conduct studies of major categories of commodities and technical data in terms of their potential for unwanted technology transfer, and of technology transfer mechanisms of controlled commodities and technical data to identify effective control techniques and strategies.
• Perform Senior Licensing Officer functions such as adjudicating complex export license applications, from interagency referral, final review and sign off on each assigned case, and managing case workload.
• Initiate and/or review export control proposals under consideration by multilateral organization. Recommend amendments to the Export Administration regulations, including recommendations to add or remove export license requirements to certain items and transactions.
• Monitor developments in chemical related research, development and production equipment and other goods, software, and technologies. Explore new theories, basic information, and scientific treatises from several disciplines to gain insight into problems
  and the effect on export control.
• Serve as a liaison for Commerce to the biotechnology and chemical industry communities, research institutions, academia, and associations.
• Provide technical advice in support of advisory opinions in response to requests from U.S. exporters for guidance about the application of the Export Administration Regulations applicable to their specific commodities and transactions.

If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management. Promotion is neither implied nor guaranteed.
This Job Opportunity Announcement may be used to fill other Chemical Engineer GS-0893-13/14, Full Performance Level (FPL) GS-14 positions within the Department of Commerce in the same geographical location or local commuting area with the same qualifications and specialized experience.
Requirements
Help
Conditions of employment

• You must be a U.S. citizen to apply for this position.
• This position requires a TOP SECRET/SCI CLEARANCE: Any required investigations and clearances must be completed before the selectee can be placed in the position.
• You must successfully pass a background investigation. This may include a credit check, a review of financial issues, as well as certain criminal offenses and illegal use of possession of drugs.
• A probationary period may be required.
• Selective Service: Males born after 12/31/59 must be registered or exempt from Selective Service (see https://www.sss.gov/).
• If you receive a conditional offer of employment for this position, you will be required to complete an Optional Form 306, Declaration for Federal Employment, and to sign and certify the accuracy of all information in your application.
• All Federal employees are required to have Federal salary payments made by direct deposit to a financial institution of their choosing.
• Bargaining Unit Position: No
• Confidential Financial Disclosure Report (OGE form 450): Yes
• License required: No
• Drug Test Required: Yes. This position is subject to pre-employment drug testing and random drug testing thereafter
• Permanent Change of Duty Station (PCS) Expense: will not be paid

Qualifications
Qualification requirements in the vacancy announcements are based on the U.S. Office of Personnel Management (OPM) Qualification Standards Handbook, which contains federal qualification standards. This handbook is available on the Office of Personnel Management's website located at: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/
Basic Requirements:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

(NOTE: COPY OF TRANSCRIPTS IS REQUIRED).
AND
In addition to meeting the basic education requirement, candidates must also meet the additional specialized experience requirement.
Applicants must possess one year of specialized experience equivalent in difficulty and responsibility to the next lower grade level in the Federal Service. Specialized experience is experience that has equipped the applicant with the particular competencies/knowledge, skills and abilities to successfully perform the duties of the position. This experience need not have been in the federal government.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations e.g., professional; philanthropic, religious; spiritual; community, student, social). Volunteer work helps build critical competencies; knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
To qualify at the GS-13 level:
SPECIALIZED EXPERIENCE: You must possess one full year (52 weeks) of specialized experience equivalent to the GS-12 in the Federal service. Specialized experience is defined as:

• Providing technical expertise in the field of chemistry/biology, chemical engineering and/or manufacturing of industrial chemicals; and
• Preparing technical analysis, summaries, reports, and/or communicating technical information to leadership, internal stakeholders, external stakeholders, or other relevant audiences to explain engineering concepts, and/or assessment results.

To qualify at the GS-14 level:
SPECIALIZED EXPERIENCE: You must possess one full year (52 weeks) of specialized experience equivalent to the GS-13 in the Federal service. Specialized experience is defined as:

• Providing technical expertise and/or advising on technical portions of guidelines/policies in the field of chemistry/biology, chemical engineering and/or manufacturing of industrial chemicals; and
• Analyzing developments related to new or emerging technologies and/or developments in the field of chemistry or biology; and
• Preparing technical analyses, summaries, or reports and/or communicating technical information to leadership, internal stakeholders, external stakeholders, or other relevant audiences to explain engineering concepts, assessment results, and/or policy-related considerations.

Education
See Qualifications Above.
NOTE:
Special Instructions for Foreign Education: Qualifying education from colleges and universities in foreign countries must be evaluated in terms of equivalency to that acquired in U.S. colleges and universities. Applicants educated in whole or in part in foreign countries must submit sufficient evidence, including transcripts, to an accredited private organization for an equivalency evaluation of course work and degree. You MUST provide a copy of the letter containing the results of the equivalency evaluation with a course by course listing along with your application. Failure to provide such documentation when requested will result in lost consideration.
Additional information
The following links provide information on various hiring authorities that do not fall under competitive examining procedures; however, they may enable you to apply through merit assignment procedures, or be eligible for a non-competitive appointment.

1. Career Transition Assistance Plan (CTAP)
2. Interagency Career Transition Assistance Plan (ICTAP)

ICTAP and CTAP Eligibles: CTAP and ICTAP candidates will be eligible if it is determined that they have exceeded the minimum qualifications for the position by attaining at least a rating of 85 out of 100. Information about ICTAP eligibility is on the Office of Personnel Management's Career Transition Resources website at: Employee Guide to Career Transition
Current or Former Political Appointees: The Office of Personnel Management (OPM) must authorize employment offers made to current or former political appointees. If you are currently, or have been within the last 5 years, a political Schedule A, Schedule C, Non-career SES, or Presidential Appointee employee in the Executive Branch, you must disclose this information to the Human Resources Office.
Reasonable Accommodations (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments, if you received the link after the close of the announcement. To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments.
Expand Hide additional information
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
A career with the U.S. government provides employees with a comprehen