ZipRecruiter

Log In

1

Quality Control Inspector Jobs in Yuma, AZ (NOW HIRING)

PKL Services, Inc.

Aircraft Worker (F-35)

Yuma, AZ · On-site

$40.70/hr

Inspect aircraft and components for any damage or defects after coatings removal and document such ... meet high quality standards. * Prepare coating materials ensuring proper smoothness and flow ...

MalaceHR

Operating Engineer

Yuma, AZ

$68K - $93K/yr

... and control systems. * Inspect, clean, calibrate, and repair HVAC equipment to maintain peak ... Monitor and inspect work performed by outside contractors to ensure quality standards are met.

Kinder Morgan

Measurement Technician

Yuma, AZ · On-site

Install, inspect, test, adjust, maintain, operate, troubleshoot, repair, calibrate and remove advanced measurement, control and regulation equipment, SCADA systems and gas quality equipment. * Detect ...

City of San Luis, AZ

Maintenance Technician

San Luis, AZ · On-site

$17.70/hr

... preserve the quality of a facility. Duties include conducting routing maintenance checks ... Establish traffic control safety procedures at work sites as per MUTCD (Manual on Uniform Traffic ...

City of San Luis

Maintenance Technician

San Luis, AZ · On-site

$17.70/hr

... preserve the quality of a facility. Duties include conducting routing maintenance checks ... Establish traffic control safety procedures at work sites as per MUTCD (Manual on Uniform Traffic ...

Asset Living

Maintenance Supervisor

Yuma, AZ

Participate in unit inspections as requested * Responsible for essential control of community ... Promote harmony and quality job performance of staff through support and effective leadership

Asset Living

Maintenance Supervisor

Yuma, AZ

Participate in unit inspections as requested * Responsible for essential control of community ... Promote harmony and quality job performance of staff through support and effective leadership

previous page

Showing results 41-60

All JobsQuality Control Inspector JobsQuality Control Inspector Jobs in Yuma, AZ

Quality Control Inspector information

See Yuma, AZ salary details

$11

$21

$33

How much do quality control inspector jobs pay per hour?

As of Aug 20, 2026, the average hourly pay for quality control inspector in Yuma, AZ is $21.25, according to ZipRecruiter salary data. Most workers in this role earn between $17.12 and $23.80 per hour, depending on experience, location, and employer.

What does a quality control inspector do?

A quality control inspector makes sure that production workers make products according to prescribed guidelines and specifications. Quality control inspectors perform tests to ensure that products meet quality standards, report their findings, then make recommendations for improvement. Quality control inspectors achieve this by using relevant tools, and technical knowledge along with strong attention to detail and analytical skills to perform these duties.

What are the key skills and qualifications needed to thrive as a quality control inspector, and why are they important?

To thrive as a Quality Control Inspector, you need a solid understanding of quality assurance procedures, attention to detail, and often a high school diploma or relevant technical training. Familiarity with inspection tools such as calipers, micrometers, and quality management systems like ISO 9001 is commonly required. Strong observational skills, problem-solving abilities, and clear communication are important soft skills in this role. These competencies ensure that products meet quality standards, reduce errors, and maintain customer satisfaction.

What are some common challenges quality control inspectors face when working on a fast-paced production line?

Quality Control Inspectors in fast-paced environments often face challenges such as quickly identifying defects without slowing down production, maintaining accuracy under time pressure, and effectively communicating issues to both production and management teams. Balancing speed with thoroughness requires strong attention to detail and the ability to prioritize tasks. Additionally, inspectors must stay updated on changing quality standards and adapt to new technologies or procedures introduced on the line.

What is the difference between Quality Control Inspector vs Quality Assurance Technician?

AspectQuality Control InspectorQuality Assurance Technician
CertificationsOften requires industry-specific certifications (e.g., ASQ certifications)Similar certifications may be preferred, but focus is on process compliance
Work EnvironmentInspecting products or materials on production lines or in labsDeveloping and implementing quality processes in manufacturing or service settings
Employer & Industry UsageCommon in manufacturing, aerospace, automotive industriesUsed in manufacturing, healthcare, and service industries
Search & Comparison IntentPeople compare roles related to product inspection and quality checksPeople look for roles focused on quality systems and process improvement

The main difference is that Quality Control Inspectors focus on inspecting and testing products to ensure quality standards are met, while Quality Assurance Technicians develop and maintain quality systems and processes to prevent defects. Both roles are essential in quality management but serve different functions within the industry.

Is quality control inspector inspection a good career?

A career as a quality control inspector involves examining products and materials to ensure they meet safety and quality standards, often requiring attention to detail and knowledge of inspection tools. It can offer stable employment with opportunities for advancement and may require certifications or training in specific industries. The role is essential in manufacturing, healthcare, and other sectors focused on quality assurance.
More about Quality Control Inspector jobs

What cities near Yuma, AZ are hiring for Quality Control Inspector jobs?

Cities near Yuma, AZ with the most Quality Control Inspector job openings:

Quality Control Inspector jobs near you
Infographic showing various Quality Control Inspector job openings in Yuma, AZ as of August 2026, with employment types broken down into 90% Full Time, and 10% Contract. Highlights an 94% In-person, and 6% Hybrid job distribution, with an average salary of $44,201 per year, or $21.3 per hour.

Aircraft Worker (F-35)

PKL Services, Inc.

Yuma, AZ • On-site

$40.70/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 20 days ago

Job description

Description
About PKL Services Inc.
We are an elite provider of skilled personnel, delivering Aerospace Maintenance, Training, and Logistics Services, committed to continual improvement, exceeding customer expectations, and implementing quality standards in dynamic environments.
About the role
PKL Services will be providing contractor Organizational Level (O-Level) maintenance in support to 3rd Marine Aircraft Wing (3rd MAW) squadrons at Marine Corps Air Station, Yuma AZ.
As the Aircraft Worker, you will make repairs to aircraft following orders of higher-grade workers in accordance with NAVAIR maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
Additional duties include:
  • Performs scheduled and unscheduled maintenance, preservation, depreservation, disassembly, rework, repair, replacement, re-assembly, or adjustment of various aircraft systems in accordance with applicable directives and instructions.
  • Removes cleans, reinstalls, or replaces defective parts, accessories, and components such as worn gaskets, couplings, and fittings, bad actuators, accumulators, gauges, sections of corroded fuel and oil lines.
  • Prepare aircraft, components and/or parts for paint removal by cleaning/washing aircraft interior and exterior surfaces prior to coatings removal, in accordance with established procedures and technical requirements.
  • Inspect aircraft and components for any damage or defects after coatings removal and document such damage or defects on the maintenance work request worksheet.
  • Perform visual inspections for damage to aircraft surfaces and components; inspect for corrosion; and record findings on proper documentation.
  • Refinish, Repair Damaged Finishes on Aircraft Surfaces, and Paint Services.
  • Be knowledgeable of a variety of surface preparation methods and techniques and capable of selecting the appropriate technique/method for proper adherence of coating materials to meet high quality standards.
  • Prepare coating materials ensuring proper smoothness and flow consistency to meet specific thickness requirements or other tolerances and to prevent skips, runs, dry areas, and drips thereby minimizing rework.
  • Mix, thin, blend, match tints and tones in coating material and/or repair damaged finishes on aircraft surfaces and perform other journeyman level painting work.
  • Clean/wash aircraft and component interior and exterior surfaces prior to coatings application with various cleaning compounds.
  • Shall assist in troubleshooting malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit (APU), and ventilation and heating systems, removes cleans, reinstalls, or replaces defective parts, accessories, and components such as worn gaskets, couplings, and fittings, bad actuators, accumulators, gauges, sections of corroded fuel and oil lines.
  • Workers may supervise the jacking and towing of aircraft, adjusts and settings such as cable tension and seat movements settings and adjustments, obtain standard parts such as fuel and oil line connections and fittings, cable linkage, and spark plug cables and harnesses by referring to the parts manuals and by making comparisons with samples.
  • May perform pre-flight, thru-flight, and post-flight maintenance inspections, enter in the maintenance records description of the work performed, and services engines and aircraft components at line station making repairs, short of overhaul required to keep aircraft safe operating condition.
  • Maintain a clean work environment. Cleaning as you go: sweeping, mopping, taking out the trash at the end of each shift.
  • May require programs assignment of additional Collateral Duties as spelled out in the Performance Work Statement.
  • Ensure all work is performed strictly in accordance with published Instructions/Manuals and Federal, State, and Local OSHA regulations.
  • Adhering to the Aircraft Confined Space Program.
  • Properly utilizing associated Personnel Protective Equipment (PPE).
  • Subject to occasional travel.
  • Be available to workday shift or night shift.
  • Any and all other duties as directed by Aircraft Site Manager.

About you
We'd love to hear from you if you have:
  • A high school diploma or equivalent.
  • Minimum of two (2) years' USN/USMC/USAF Organizational level aircraft airframes/structural or corrosion control experience. F-35 experience preferred.
  • If deemed by the Site Manager, this individual must acquire all Support Equipment licenses that are required for the position.
  • Must have and maintain a valid State Driver's License.
  • Must be able to attain all qualifications during the 90-day probationary period.
  • This position will require U.S. citizenship and the ability to obtain and maintain a DoD Secret clearance.
  • Must be familiar with all Airframes work center "O" level publications relevant to the maintenance of the Type Model Series aircraft appropriate to the assignment and have a thorough practical and theoretical knowledge of the equipment/systems.
  • Within 90 days of hiring, must be proficient with JTD and CMMS maintenance documentation system.
  • Must possess the ability to perform all airframe work center designated tasks as outlined in the Interactive Electronic Maintenance Manual (IETM).
  • Working knowledge of the CNAFINST 4790.2 (NAMP), Naval Aviation Maintenance Program Standard Operating Procedures (NAMSOPs) and local NAMPSOP instructions.
  • Experience in the use and care of power tools, testing equipment and precision measuring devices in the maintenance and repair of aircraft.
  • Shall be able to obtain a Department of Defense (DoD) Common Access Card (CAC) card privileges to ensure access to flight line workspaces and critical information systems.
  • Any and all other duties as assigned by the Program Manager/Site Manager.

Compensation & Benefits
Successful candidates will not only be provided with an outstanding career opportunity and welcoming environment but will also receive a generous and competitive total compensation package that support employees through every stage of life:
  • $40.70 hour.
  • This is a full time/ non-exempt/ union position.
  • The company sponsors group medical, dental, vision, basic life paid coverage plans for the employee/family.
  • 401k plan offered.
  • Eleven (11) paid holidays per year.
  • Employees will accrue PTO at a bi-weekly accrual rate of 4.31 hours per pay period. (112 hours annual)
  • Employee Assistance Program (no cost).
  • $75.00 employer contribution each month towards the Machinist Custom Choice Benefits.
  • 40 paid Sick hours each calendar year.

Physical Demands and Work Environment:
  • Primarily in a workshop/hangar environment but may traverse into high noise areas or near active jet aircraft operating ramps.
  • Ability to both sit and stand for long periods of time.
  • Ability to perform repetitive motion (keyboarding, 10-key).
  • This position requires normal physical functions. Work may require frequent bending, reaching, and climbing.
  • May frequently lift and carry items weighing up to fifty pounds and occasionally lift heavier items with the assistance of other workers.
  • Work may be performed on top or under equipment in cramped or awkward positions.
  • Normal color perception required.
  • The noise level in the primary work environment is usually moderate but may require single or double hearing protection.
  • May be exposed at times to moderate discomforts such as heat, cold, rain, wind.

All qualified job seekers are encouraged to apply. We also work to provide reasonable accommodation to individuals with disabilities.
PKL Services Inc. is an Equal Opportunity Affirmative Action Employer. EOE, Minorities, Females, Vet, Disabled, Sexual Orientation, Gender Identity, or any other protected class.
This commitment to diversity, equal opportunity and sustainability enables PKL Services to draw from a remarkable wealth of talent to create one of the world's leading Aerospace Maintenance, Training, and Logistics Services companies.

Apply