ZipRecruiter

Log In

1

Quality Control Inspector Trainee Jobs in Florida

MRO Holdings, Inc.

QC Inspector

Jacksonville, FL · On-site

Quality Job Title: QC Inspector Reports To: QC Supervisor DOT/ NON- DOT: DOT Shift: 2nd Shift Position Summary Performs skilled work in the inspection of aircraft parts, structures, and systems in ...

Flightstar Jacksonville

QC Inspector

Jacksonville, FL · On-site

Quality Job Title: QC Inspector Reports To: QC Supervisor DOT/ NON- DOT: DOT Shift: 2nd Shift Position Summary Performs skilled work in the inspection of aircraft parts, structures, and systems in ...

VAERO

Quality Control Inspector

Jacksonville, FL

Quality Control Inspector Supervisor: Quality Supervisor Classification: Hourly, non-exempt Shift: 1st Shift M-F 7AM-330PM Perform dimensional and visual inspections of aircraft details, machine ...

CTS Engines

Quality Control Inspector

Coral Springs, FL · On-site

QUALITY CONTROL BENCH INSPECTOR Responsibilities include but are not limited to: * Reading and adhering to the published Workscope, as revised. * Performing Receiving Inspection of incoming engines ...

Aeroman

QC Inspector

Jacksonville, FL

Quality Job Title: QC Inspector Reports To: QC Supervisor DOT/ NON- DOT: DOT Shift: 2nd Shift Position Summary Performs skilled work in the inspection of aircraft parts, structures, and systems in ...

InfoTree

Be Seen First

Quality Control Inspector

New Port Richey, FL · On-site

$21 - $25/hr

Quality Control Inspector (Mid Level) JOB LOCATION: New Port Richey, FL (Onsite Position) Contract Duration: 12 months Shift: Mon-Fri - 8:00am-4:30pm Top 3 "must-have" skills or qualities in a ...

New

Exalta Group

QC Inspector III

Naples, FL · On-site

The QC Inspector III plays a critical role in ensuring the highest standards of quality within the manufacturing process. This position is responsible for conducting detailed inspections and audits ...

Exalta Group

QC Inspector III

Bonita Springs, FL · On-site

The QC Inspector III plays a critical role in ensuring the highest standards of quality within the manufacturing process. This position is responsible for conducting detailed inspections and audits ...

Visium Resources, Inc.

QC Inspector I

Orlando, FL

Quality Control Inspector I Summary: The Quality Inspector 1 - Quality Control Inspector performs a variety of routine inspection procedures to ensure quality at various stages of production.

Visium Resources, Inc.

QC Inspector I

Orlando, FL

Quality Control Inspector I Summary: The Quality Inspector 1 - Quality Control Inspector performs a variety of routine inspection procedures to ensure quality at various stages of production.

next page

Showing results 1-20

All JobsQuality Control Inspector JobsQuality Control Inspector Trainee JobsQuality Control Inspector Trainee Jobs in Florida

Quality Control Inspector Trainee information

Is QC inspection a good career?

A Quality Control Inspector Trainee role can be a good career for those interested in manufacturing, quality standards, and attention to detail. It often involves learning inspection tools and techniques, with opportunities for advancement into supervisory or specialized positions. The job provides stable employment and can lead to certifications that enhance career prospects.

What are some common challenges faced by Quality Control Inspector Trainees, and how can they be overcome?

Quality Control Inspector Trainees often face challenges such as mastering the use of specialized measuring equipment, interpreting technical drawings, and understanding complex quality standards. Overcoming these challenges typically involves hands-on training, seeking guidance from experienced inspectors, and dedicating time to study company procedures and industry regulations. Engaging in regular team meetings and asking questions can also help trainees develop confidence and accuracy in their inspections. Building strong communication skills is essential, as trainees frequently collaborate with production and engineering teams to resolve quality issues.

How do I become a quality control inspector?

To become a quality control inspector, typically you need a high school diploma or equivalent, along with on-the-job training or relevant technical skills. Some positions may require certifications such as ASQ Certified Quality Inspector (CQI), and familiarity with inspection tools and quality standards is beneficial.

How to become a QC inspector with no experience?

To become a Quality Control Inspector Trainee with no experience, focus on developing attention to detail, basic knowledge of quality standards, and familiarity with inspection tools. Entry-level positions often require a high school diploma or equivalent, and on-the-job training is provided to learn inspection procedures and quality documentation. Certifications such as ASQ's Certified Quality Inspector can improve prospects but are not always required initially.

What does a Quality Control Inspector Trainee do?

A Quality Control Inspector Trainee assists in examining products and materials for defects or deviations from specifications under the supervision of experienced inspectors. They learn to use various tools and measurement devices, follow inspection procedures, and document results. The role is designed to provide hands-on training in quality assurance processes, product standards, and safety regulations. Over time, trainees develop the skills needed to ensure products meet company and industry quality standards.

What is the difference between Quality Control Inspector Trainee vs Quality Control Inspector?

AspectQuality Control Inspector TraineeQuality Control Inspector
CertificationsOften requires basic quality assurance or safety certifications, training provided on the jobTypically requires relevant certifications or experience in quality inspection
Work EnvironmentEntry-level, supervised environment in manufacturing or production facilitiesFull responsibility for inspecting products, working independently or with minimal supervision
Job ResponsibilitiesAssisting with inspections, learning quality standards, gaining hands-on experiencePerforming detailed inspections, documenting defects, ensuring compliance with standards

The main difference is that a Quality Control Inspector Trainee is in an entry-level position focused on learning and gaining experience, often under supervision, while a Quality Control Inspector is a fully responsible role with established skills and independent inspection duties.

What are the key skills and qualifications needed to thrive as a Quality Control Inspector Trainee, and why are they important?

To thrive as a Quality Control Inspector Trainee, you need a basic understanding of inspection procedures, attention to detail, and often a high school diploma or equivalent. Familiarity with measurement tools like calipers, micrometers, and quality management systems (QMS) is typically required, and some employers may prefer candidates with relevant certifications such as ASQ's Certified Quality Inspector (CQI). Strong observational skills, effective communication, and a willingness to learn help trainees excel in team environments and adapt to evolving standards. These skills are crucial to ensuring product quality, maintaining safety standards, and supporting continuous improvement within manufacturing or production settings.

What is a quality control trainee?

A quality control trainee is an entry-level worker who learns to inspect products and processes to ensure they meet quality standards. They typically receive on-the-job training and may learn to use inspection tools and follow safety protocols as part of their development in quality assurance roles.
What are the most commonly searched types of Quality Control Inspector jobs in Florida? The most popular types of Quality Control Inspector jobs in Florida are:
What cities in Florida are hiring for Quality Control Inspector Trainee jobs? Cities in Florida with the most Quality Control Inspector Trainee job openings:
Quality Control Inspector Trainee jobs near you
Quality Control Inspector

Quality Control Inspector

Honeycomb Company of America

Sarasota, FL • On-site

$23 - $28/hr

Full-time

Posted 19 days ago

Job description

Summary:

The Quality Inspector ensures parts, materials, and processes are conforming to engineering, quality, health, safety, and other standards by performing inspections on manufactured items.

.Essential Duties and Responsibilities:

  • Perform visual and dimensional inspections of parts and tooling throughout the manufacturing life cycle; From receiving raw material, in process inspection of detail components at various stages of completion, and final inspection.
  • Read and interpret engineering drawings and process/part specifications
  • Operate all necessary equipment required to perform process control testing as well as part and tool inspections.
  • Use calibrated precision measuring equipment.
  • Use inspection lights and magnifying aids.
  • Perform on site calibration of company measuring equipment.
  • Monitor processes for adherence to company & customer specifications
  • Ensure completeness of manufacturing processes prior to initiation of the next process step.
  • Document inspection results.
  • Complete and document AS9102 first article inspections.
  • Participate in and occasionally lead Root Cause Corrective Action (RCCA) events.
  • Compare test results with requirements and report results.
  • Provide internal customers with correct products and services, on time.
  • Create, communicate, and accomplish daily department schedules.
  • Retain part traceability & documentation throughout the manufacturing process.
  • Utilize MRP/ERP system to keep program data current.
  • Maintain a safe and healthy work environment by following standards and procedures, complying with legal regulations.
  • Other duties as assigned.
  • Qualifications:

Minimum:

  • High school diploma or GED
  • 2+ years working in Quality Control
  • Knowledge of ISO 9001 : AS9100D (preferred)
  • Knowledge of NADCAP (preferred)
  • Familiarity with the properties of aluminum alloy, properties of aluminum honeycomb core, metal forming, machining, heat treat, adhesive bonding, honeycomb sandwich layup, autoclave cure.
  • Proficient in MS Office suite, with high proficiency in Excel
  • Work Authorization: Must be a US Citizen with the ability to pass the Defense National Agency Check IAW DoDD 5200.2

Physical Demands/ ADA Compliance:

The employee may be required to stand for a full shift while wearing PPE. Must be able to lift 50lbs. Correctable vision to 20/20 with full depth perception. Ability to pass DOT Drug Testing requirements (49 CFR Part 40). Regularly required to push, pull, bend, and apply pressure using hand tools and operate machinery. The Employee may also be required to work in a heated environment and successfully pass the HCOA Respirator Qualification program as an essential job duty due to exposure to particulates and fumes.


Honeycomb Company of America is a Drug-Free Workplace.

Offers of employment with Honeycomb Company of America are conditioned upon the successful completion of a background check and drug-test, subject to applicable laws and regulations.