1

Quality Control Audio Video Jobs (NOW HIRING)

Audio/Video Installer

Montgomery, AL ยท On-site

$30 - $35/hr

Run and terminate low-voltage cabling, including Ethernet, speaker, HDMI, and control wiring ... Ensure installations meet company quality standards and industry best practices. * Maintain tools ...

Audio Video Technician

Auburn, WA ยท On-site

$59K - $88K/yr

Monitor the equipment for any issues that may arise and adjust as needed to maintain quality ... At least 2 years of supporting Crestron Control System SPECIFIC SKILLS/KNOWLEDGE/ABILITIES REQUIRED ...

Showing results 21-40

Quality Control Audio Video information

See salary details

$12

$20

$29

How much do quality control audio video jobs pay per hour?

As of Sep 10, 2026, the average hourly pay for quality control audio video in the United States is $20.97, according to ZipRecruiter salary data. Most workers in this role earn between $18.03 and $23.08 per hour, depending on experience, location, and employer.

What is a quality control audio video specialist?

Quality Control Audio Video jobs involve inspecting and ensuring the quality of audio and video content before it is released to the public or delivered to clients. Professionals in this field check for technical errors, such as sync issues, dropouts, or incorrect formatting, as well as content compliance with broadcast and distribution standards. They may also use specialized software and equipment to analyze and correct problems, working closely with production, post-production, and distribution teams. Attention to detail and strong technical knowledge are crucial for success in this role.

What skills and qualifications are needed to thrive as a quality control audio video specialist?

To thrive as a Quality Control Audio Video specialist, you need strong attention to detail, technical knowledge of audio and video standards, and often a relevant degree or training in media production or engineering. Familiarity with broadcast monitoring tools, waveform monitors, vectorscopes, audio analyzers, and editing software like Adobe Premiere or Avid is typically required. Excellent problem-solving, communication, and time management skills help you efficiently identify and address quality issues while collaborating with production teams. These skills ensure the delivery of high-quality, error-free content that meets industry standards and client expectations.

What are common challenges faced by quality control audio video specialists during the review process?

Quality Control Audio Video professionals often encounter challenges such as tight production deadlines, managing large volumes of content, and identifying subtle technical errors that can impact the final product. They must pay close attention to detail when checking for issues like audio sync, dropouts, video artifacts, or compliance with broadcast standards. Additionally, coordinating with production, editing, and technical teams to resolve detected issues requires strong communication and problem-solving skills. Staying updated with evolving industry standards and technology is also essential for success in this role.

What are popular job titles related to Quality Control Audio Video jobs?

For Quality Control Audio Video jobs, the most frequently searched job titles are:

Infographic showing various Quality Control Audio Video job openings in the United States as of June 2026, with employment types broken down into 1% As Needed, 98% Full Time, and 1% Nights. Highlights an 88% Physical, 2% Hybrid, and 10% Remote job distribution, with an average salary of $43,612 per year, or $21 per hour.

Service Technician - Audio Video Systems

Lone Tree, CO โ€ข On-site

Logic Integration
Computer and Electronic Product Manufacturingย โ€ขย 11 - 50 employees

Full-time

Medical, Dental, Vision, Retirement, PTO

Re-posted 19 days ago


Key responsibilities

  • Perform on-site and remote diagnostics on installed AV systems including audio, video, control, networking, lighting, and shading

  • Troubleshoot system-level issues using diagnostic methodology across cabling, hardware, configuration, programming, and network layers

  • Perform scheduled preventative maintenance, system health checks, and document system conditions and maintenance performed


Job description


AV Service Technician
Full-TimeReports to: Service Manager
About Logic Integration
Logic Integration is a nationally recognized audiovisual integration firm headquartered in Lone Tree, Colorado. We design, engineer, install, and support advanced AV, lighting, shading, and automation systems for commercial and residential clients across the United States. Our team delivers approximately 200 projects annually, ranging from $25K to $2M+, and we hold ourselves to the highest standards of quality, craftsmanship, and professionalism.
Role Summary
The AV Service Technician is responsible for diagnosing, maintaining, troubleshooting, and repairing installed audiovisual systems across Logic Integration's commercial and residential client base. This role serves as a direct point of contact with clients, requiring exceptional customer service skills, professional communication, and the ability to work independently in the field.
The Service Technician must be capable of troubleshooting complete AV systems including control, audio, video, networking, lighting, and shading. This role requires strong diagnostic methodology, familiarity with major AV platforms (Crestron, Control4, QSC, Biamp), and the ability to upload, modify, and load programming code in the field.
This role requires 2-5+ years of experience in AV installation, service, or a related technical trade with demonstrated troubleshooting ability.
Core Responsibilities
Diagnostics, Troubleshooting & Repair
โ€ข Perform on-site and remote diagnostics on installed AV systems including audio, video, control, networking, lighting, and shading
โ€ข Troubleshoot system-level issues using logical, step-by-step diagnostic methodology across cabling, hardware, configuration, programming, and network layers
โ€ข Diagnose and resolve signal path issues, ground loops, impedance mismatches, network connectivity failures, and control system faults
โ€ข Perform firmware updates, software patches, and configuration changes on AV equipment in the field
โ€ข Upload, download, and perform field edits to control system programs (Crestron, Control4) and DSP platforms (QSC, Biamp)
โ€ข Configure and tune audio systems: gain structure, EQ, routing, zone management, and speaker optimization
โ€ข Repair or replace faulty equipment, cabling, and terminations as needed
Preventative Maintenance & System Support
โ€ข Perform scheduled preventative maintenance visits on client AV systems per Logic Care service plans
โ€ข Conduct system health checks including signal verification, audio tuning, video calibration, and network performance
โ€ข Test and certify cabling using appropriate test equipment (cable testers, multimeters, tone generators)
โ€ข Document system conditions, maintenance performed, and any recommendations for upgrades or repairs
โ€ข Support remote monitoring and diagnostics for managed service clients
Client Relations & Communication
โ€ข Serve as the on-site representative of Logic Integration - maintain the highest level of professionalism, courtesy, and client care
โ€ข Communicate clearly with clients about system issues, repair timelines, and recommended solutions
โ€ข Coordinate with Project Managers, Engineers, and Programmers on escalated issues or system modifications
โ€ข Process service work orders accurately and in a timely manner
โ€ข Provide client training on system operation when needed
Installation Support
โ€ข Support installation teams as needed with cable infrastructure, device mounting, rack assembly, and system trim-out
โ€ข Install, connect, and configure AV equipment including displays, projectors, speakers, cameras, microphones, and control devices
โ€ข Read and interpret AV drawings, floor plans, rack elevations, and signal flow diagrams
โ€ข Ensure all work meets AVIXA installation standards for cable management, rack building, and device mounting
Job Site Operations & Documentation
โ€ข Track and report time accurately using company time-tracking systems
โ€ข Maintain company vehicle cleanliness - daily trash removal, weekly deep clean, organized tool and parts inventory
โ€ข Maintain accurate service records and documentation for all client visits
โ€ข Comply with all job site safety requirements including PPE, OSHA standards, and client-specific safety protocols
โ€ข Maintain a clean, organized, and safe work environment at all client sites
Industry Standards Alignment (AVIXA / InfoComm)
The Service Technician is expected to work in compliance with industry standards:
โ€ข ANSI/AVIXA A102.01:2017 - AV Installation Standard (cable management, device mounting, system commissioning)
โ€ข ANSI/AVIXA F501.01 - Cable Labeling and Cable Pathways
โ€ข ANSI/AVIXA A102.02 - AV System Performance Verification
โ€ข ANSI/TIA-568 - Structured Cabling Standards
โ€ข ANSI/TIA-606 - Administration Standard for Telecommunications Infrastructure
โ€ข OSHA Construction Safety Standards (fall protection, PPE, electrical safety)
What Success Looks Like
โ€ข Service calls resolved on the first visit whenever possible
โ€ข Clients consistently report positive service experiences
โ€ข Systems restored to full performance quickly and professionally
โ€ข Accurate, complete service documentation for every visit
โ€ข Strong communication with Service Manager and internal teams on escalations and recurring issues
โ€ข Company vehicle maintained to Logic Integration standards
Logic Integration is an Equal Opportunity Employer.
Requirements
Required Qualifications
โ€ข 2-5+ years of experience in AV installation, service, or related technical trade
โ€ข Strong troubleshooting and diagnostic skills across audio, video, control, and networking systems
โ€ข Experience with control system platforms (Crestron, Control4) including basic code loading and field edits
โ€ข Experience with DSP platforms (QSC, Biamp) including basic configuration and audio tuning
โ€ข Working knowledge of audio and video signal types, routing, and system interconnection
โ€ข Ability to read AV drawings, rack elevations, and signal flow diagrams
โ€ข Excellent customer service and professional communication skills
โ€ข Self-motivated with strong time management and ability to work independently
โ€ข High school diploma or equivalent (two-year electronics degree or equivalent experience preferred)
โ€ข Valid driver's license with clean driving record
โ€ข Ability to pass background check and drug screening
โ€ข Authorized to work full-time in the United States
โ€ข Must provide standard hand tools per Logic Integration tool list
โ€ข Ability to safely lift 80 lbs regularly and work on ladders, lifts, and in confined spaces
Preferred Qualifications
โ€ข AVIXA CTS or CTS-I certification
โ€ข Manufacturer certifications: Crestron, Control4, QSC, Biamp, Shure, or similar
โ€ข Experience with AV-over-IP systems (Dante, AES67, NDI)
โ€ข Experience with UC platforms (Microsoft Teams Rooms, Zoom Rooms)
โ€ข Networking fundamentals (IP addressing, VLANs, subnetting, basic switching)
โ€ข Experience with lighting control systems (Lutron, Ketra) and motorized shading
โ€ข Experience with residential automation platforms (Control4, Savant)
โ€ข Pro-audio experience (live sound, installed sound, mixing) a plus
โ€ข Personal interest in acoustics, electronics, music, sound, lighting, and video systems
Benefits
โ€ข Competitive compensation commensurate with experience
โ€ข Quarterly performance bonus based on service metrics
โ€ข Company vehicle provided
โ€ข Health insurance - Logic pays 50% of base plan (Kaiser)
โ€ข Dental and vision insurance - Logic pays 50% for employee and family (Humana)
โ€ข 401(k) with company match up to 3+% after 1 year
โ€ข Paid vacation (40 hours year one, 80 hours year two, 120 hours year three)
โ€ข Paid sick leave (48 hours/year)
โ€ข Paid birthday off
โ€ข Paid holidays
โ€ข 4-day work week (Monday-Thursday, 10-hour days)
โ€ข Paid training and professional development
โ€ข AV equipment purchases at cost
โ€ข Quarterly team outings