ZipRecruiter

Log In

1

Protection And Controls Engineer Jobs in Pennsylvania

Tait

Senior Controls Engineer

Lititz, PA · On-site

$89K - $118K/yr

TAIT is seeking a Senior Controls Engineer to lead the design, development, and commissioning of ... Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work ...

Materion Corporation

Automation Controls Engineer

Leesport, PA · On-site

$77K - $103K/yr

The Automation Controls Engineer will design, fabricate, program, install, modify, and repair all ... The Company also prohibits harassment of applicants and employees based on any of these protected ...

Materion Corporation

Automation Controls Engineer

Leesport, PA · On-site

$77K - $103K/yr

The Automation Controls Engineer will design, fabricate, program, install, modify, and repair all ... The Company also prohibits harassment of applicants and employees based on any of these protected ...

Materion Corporation

Automation Controls Engineer

Leesport, PA · On-site

$77K - $103K/yr

The Automation Controls Engineer will design, fabricate, program, install, modify, and repair all ... The Company also prohibits harassment of applicants and employees based on any of these protected ...

Materion

Automation Controls Engineer

Leesport, PA · On-site

$77K - $103K/yr

The Automation Controls Engineer will design, fabricate, program, install, modify, and repair all ... The Company also prohibits harassment of applicants and employees based on any of these protected ...

Materion Corporation

Automation Controls Engineer

Leesport, PA · On-site

$77K - $103K/yr

The Automation Controls Engineer will design, fabricate, program, install, modify, and repair all ... The Company also prohibits harassment of applicants and employees based on any of these protected ...

Materion Corporation

Automation Controls Engineer

Leesport, PA · On-site

$77K - $103K/yr

The Automation Controls Engineer will design, fabricate, program, install, modify, and repair all ... The Company also prohibits harassment of applicants and employees based on any of these protected ...

Materion Corporation

Automation Controls Engineer

Leesport, PA · On-site

$77K - $103K/yr

The Automation Controls Engineer will design, fabricate, program, install, modify, and repair all ... The Company also prohibits harassment of applicants and employees based on any of these protected ...

Hire Velocity, LLC

Automation Controls Engineer

Leesport, PA · On-site

$77K - $103K/yr

The Automation Controls Engineer will design, fabricate, program, install, modify, and repair all ... The Company also prohibits harassment of applicants and employees based on any of these protected ...

Materion Corporation

Automation Controls Engineer

Leesport, PA · On-site

$77K - $103K/yr

The Automation Controls Engineer will design, fabricate, program, install, modify, and repair all ... The Company also prohibits harassment of applicants and employees based on any of these protected ...

The Hershey Company

Sr Controls Engineer

Hershey, PA · On-site

$92K - $121K/yr

Reporting to the Manager of Controls & Security Tech Solutions, the Senior Controls Engineer leads ... The Hershey Company is an Equal Opportunity Employer - Minority/Female/Disabled/Protected Veterans.

Hersheys

Sr Controls Engineer

Hershey, PA

$92K - $121K/yr

Reporting to the Manager of Controls & Security Tech Solutions, the Senior Controls Engineer leads ... The Hershey Company is an Equal Opportunity Employer - Minority/Female/Disabled/Protected Veterans.

SNC-Lavalin

Protection & Controls (P&C) Designer

Exton, PA · On-site +1

$68K - $114K/yr

Overview We are seeking a Protection & Controls (P&C) Designer to join our team remotely or hybrid ... The P&C Designer reports to our P&C Engineering Manager and the position requires working ...

previous page

Showing results 41-60

All JobsProtection And Controls Engineer JobsProtection And Controls Engineer Jobs in Pennsylvania

Protection And Controls Engineer information

What is a protection and controls engineer?

Protection and Controls Engineers are specialized electrical engineers who design, implement, and maintain systems that protect electrical power grids and equipment from faults and failures. They ensure the reliable operation of substations and transmission networks by developing control schemes and selecting protective relays and devices. Their work helps prevent equipment damage, power outages, and safety hazards by quickly detecting and isolating electrical faults. These engineers collaborate with utility companies, work with advanced protective technologies, and play a critical role in maintaining grid stability and safety.

How does a protection and controls engineer typically collaborate with other teams during substation projects?

Protection and Controls Engineers frequently work in close partnership with design, commissioning, and operations teams during substation projects. They are responsible for coordinating relay settings, reviewing control schematics, and ensuring that protection systems align with overall project requirements. Effective communication and teamwork are essential, as these engineers must integrate feedback from field technicians and project managers to address technical challenges and maintain system reliability. This collaborative environment helps ensure that all protection and control systems function safely and efficiently.

What are the key skills and qualifications needed to thrive as a protection and controls engineer, and why are they important?

To thrive as a Protection and Controls Engineer, you need a strong background in electrical engineering, particularly in power systems, supported by a relevant degree and often a Professional Engineer (PE) license. Proficiency with industry-standard software such as SEL AcSELerator, ETAP, and SCADA systems, along with knowledge of NERC and IEEE standards, is typically required. Strong analytical thinking, attention to detail, and effective communication are vital soft skills for collaborating with teams and ensuring system reliability. These skills and qualifications are crucial to designing, maintaining, and troubleshooting protective relays and control systems that ensure the safe and reliable operation of electrical grids.

How much do protection and controls engineers make?

Protection and controls engineers typically earn a median annual salary ranging from $70,000 to $110,000, depending on experience, location, and industry. Senior roles or those with specialized skills in relay settings, SCADA systems, or certifications like PE or IEEE may earn higher salaries. Compensation can also vary based on the complexity of projects and the size of the employer.

What are popular job titles related to Protection And Controls Engineer jobs in Pennsylvania?

For Protection And Controls Engineer jobs in Pennsylvania, the most frequently searched job titles are:

What job categories do people searching Protection And Controls Engineer jobs in Pennsylvania look for?

The top searched job categories for Protection And Controls Engineer jobs in Pennsylvania are:

What cities in Pennsylvania are hiring for Protection And Controls Engineer jobs?

Cities in Pennsylvania with the most Protection And Controls Engineer job openings:

Protection And Controls Engineer jobs near you
Infographic showing various Protection And Controls Engineer job openings in Pennsylvania as of August 2026, with employment types broken down into 83% Full Time, 14% Part Time, and 3% Contract. Highlights an 71% Physical, 1% Hybrid, and 28% Remote job distribution.

Senior Controls Engineer

Tait

Lititz, PA • On-site

$89K - $118K/yr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 15 days ago

Key responsibilities

  • Lead the design of control system architectures for complex, distributed automation systems

  • Develop and program PLCs and advanced HMI/SCADA interfaces, and perform system commissioning and troubleshooting

  • Mentor junior engineers and collaborate with multidisciplinary teams throughout project lifecycle

Job description

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock ‘n’ roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT’s 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics
Position Purpose: 

TAIT is seeking a Senior Controls Engineer to lead the design, development, and commissioning of advanced automation, motion control, and show control systems for large-scale live entertainment and themed environments.

As a senior team member, you will take ownership of controls system architecture, PLC programming, and project execution, while mentoring engineers and driving engineering standards. You will work across the full project lifecycle—from concept and design through manufacturing, integration, commissioning (FAT/SAT), and client handover.

This role is ideal for someone with deep experience in industrial automation, distributed control systems, and motion control who enjoys solving complex, multidisciplinary engineering challenges.


Essential Responsibilities: 
 
  • Lead the design of control system architectures for complex, distributed automation systems
  • Develop and program PLCs (Allen-Bradley, Siemens, Beckhoff) and advanced HMI/SCADA interfaces
  • Own full project lifecycle execution: design → integration → commissioning → handover
  • Perform and guide system commissioning, FAT/SAT testing, and on-site startup
  • Conduct advanced troubleshooting, debugging, and performance optimization
  • Lead functional safety analysis and risk assessments (ISO 12100, IEC 62061, ISO 13849)
  • Create and review technical documentation (control narratives, FDS, I/O lists, test procedures)
  • Mentor junior engineers and provide technical leadership across projects
  • Collaborate with multidisciplinary teams (mechanical, electrical, AVL, creative, PMs)
  • Represent TAIT in customer-facing environments, ensuring high-quality delivery
Minimum Qualifications:
  • Bachelor’s degree in Engineering, Technical Theater, or equivalent experience
  • 7+ years of experience in controls engineering / industrial automation
  • Strong hands-on experience with:
    • PLC programming (Ladder Logic, Structured Text, Function Block, SFC)
    • HMI/SCADA systems (FactoryTalk, Ignition, WinCC, etc.)
  • Proven experience leading or owning projects through commissioning and delivery
  • Experience with system integration, commissioning, and troubleshooting
  • Strong understanding of industrial communication protocols (EtherNet/IP, Modbus, Profinet, OPC-UA)
  • Expected Travel: 15-20%. Must be able to acquire passport for international travel.
  • Experience with motion control systems (servo drives, closed-loop control, robotics)
  • Experience with large-scale or distributed control systems
  • Strong knowledge of functional safety standards (ISO 13849, IEC 62061, ISO 12100, TÜV)
  • Familiarity with Beckhoff TwinCAT, Siemens TIA Portal, Allen-Bradley Studio 5000
  • Experience in live entertainment, theme parks, ride systems, or show control
  • Exposure to TAIT Navigator or similar show control platforms preferred
Working Conditions and Physical Effort: 
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While the role does not require regular lifting or physical exertion, it frequently requires working in a shop or construction environment, and will frequently require the employee to walk, bend, climb, push, pull, twist, squat, stoop, and kneel.

 Work conditions of the role are:

  • Must be able to stand for extended periods of time.
  • Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises.
  • Work environment involves some exposure to hazards or physical risks which require following basic safety precautions.
  • Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location.
  • Must be able to view and complete project work on a computer monitor or equipment screens for extended periods of time.
 
TAIT Benefits:
  • Competitive medical, dental, and vision insurance plans
  • Health Savings Account (HSA) with employer contributions (HDHP plans)
  • Flexible Spending Accounts (Medical & Dependent Care)
  • Employer-paid life insurance with optional supplemental coverage
  • Employer-paid Short-term with optional long-term disability insurance
  • 401(k) retirement plan with company match
  • Paid parental leave
  • Employee Assistance Program (EAP)
  • Wellness stipends
  • Voluntary benefits (e.g., accident, critical illness)
  • Paid vacation and 12 holidays
 
 #LI-JH1
TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

Apply