ZipRecruiter

Log In

1

Protection And Control Jobs (NOW HIRING)

Entergy

Protection & Control Engineer

New Orleans, LA · On-site

Provides protection and control design engineering services for transmission and distribution substations, along with technical guidance and support to asset management and capital projects teams.

Entergy

Protection & Control Engineer

New Orleans, LA · On-site

Provides protection and control design engineering services for transmission and distribution substations, along with technical guidance and support to asset management and capital projects teams.

Iberdrola

Lead Engineer - Protection & Control

Orange, CT · On-site

$109K - $144K/yr

Lead Engineer - Protection & Control Location: Orange, CT Reports to: Supervisor - Protection & Control - Philosophy and Standards Work Type: Office The base salary for this position is dependent ...

FindTalent

Lead Protection & Control Engineer

Fort Mill, SC

$90K - $118K/yr

FindTalent is seeking a Lead Protection & Control Engineer to join our team onsite in South Carolina. This role will lead the design, coordination, and implementation of protective relay systems for ...

ABB

Protection and Control Engineer

Deer Park, TX · Remote

As a Protection & Control Engineer, you will have the opportunity to act as the technical lead for all engineering activities in assignments. Each day, you will ensure the activities related to all ...

ABB

Protection and Control Engineer

Anaheim, CA · Remote

As a Protection & Control Engineer, you will have the opportunity to act as the technical lead for all engineering activities in assignments. Each day, you will ensure the activities related to all ...

previous page

Showing results 41-60

All JobsProtection And Control Jobs

Protection And Control information

See salary details

$12

$24

$39

How much do protection and control jobs pay per hour?

As of Aug 1, 2026, the average hourly pay for protection and control in the United States is $24.44, according to ZipRecruiter salary data. Most workers in this role earn between $18.03 and $30.53 per hour, depending on experience, location, and employer.

What jobs make $3,000 a day?

In protection and control roles, high-paying jobs such as senior electrical engineers, project managers, or specialized consultants can earn around $3,000 daily, especially with extensive experience, certifications, and working on large-scale infrastructure projects. These positions often require advanced technical skills, industry certifications, and the ability to manage complex systems or teams.

What engineers make $300,000 a year?

Protection and Control engineers, especially those with extensive experience, advanced certifications, and specialized skills in power systems, can reach annual salaries of $300,000 or more. Such high earnings are typically found in senior roles within the energy or utility sectors, often involving leadership, complex project management, or consulting responsibilities.

What is the difference between Protection And Control vs Relay Technician?

AspectProtection And ControlRelay Technician
CertificationsElectrical certifications, protection relay trainingElectrical certifications, relay testing certifications
Work EnvironmentPower plants, substations, industrial facilitiesSubstations, power plants, maintenance sites
ResponsibilitiesDesign, install, and maintain protection systems and control schemesTest, troubleshoot, and repair protection relays and associated equipment

Protection And Control professionals focus on designing and maintaining protection systems and control schemes for electrical infrastructure, ensuring system reliability. Relay Technicians primarily test and repair protection relays. While both roles require electrical certifications and work in similar environments, Protection And Control roles are more design-oriented, whereas Relay Technicians focus on maintenance and troubleshooting.

What are the key skills and qualifications needed to thrive as a Protection and Control Engineer, and why are they important?

To thrive as a Protection and Control Engineer, you need strong knowledge of power systems, relay coordination, and a degree in electrical engineering or a related field. Familiarity with industry-standard software like ETAP, SEL AcSELerator, and experience with SCADA and relay testing equipment are typically required. Analytical thinking, problem-solving, and effective communication skills set candidates apart in this role. These competencies are vital for ensuring the reliability and safety of electrical power systems, minimizing outages, and maintaining compliance with regulatory standards.

What engineers make $500,000?

Senior protection and control engineers with extensive experience, specialized skills in power systems, and advanced certifications can earn salaries approaching or exceeding $500,000 annually, especially in high-demand regions or with leadership responsibilities. Such roles often require expertise in system design, project management, and the use of specialized software tools.

What does a protection and control technician do?

A protection and control technician installs, maintains, and tests electrical protection systems and control equipment used in power systems to ensure safety and reliability. They work with relays, circuit breakers, and automation devices, often using specialized testing tools and following industry standards. Certification and knowledge of electrical systems are typically required for this role.

What are Protection and Control engineers?

Protection and Control engineers are specialized electrical engineers who design, implement, and maintain systems that safeguard electrical power networks. Their work ensures the reliability and safety of power grids by detecting faults and initiating appropriate responses, such as isolating affected areas. They also develop control schemes to manage the flow of electricity and coordinate the operation of various devices in substations and power plants. These professionals play a crucial role in preventing equipment damage, minimizing outages, and maintaining system stability.

What are some common challenges faced by Protection and Control Engineers in the power industry?

Protection and Control Engineers often face the challenge of balancing system reliability with fast response times during faults or disturbances. They must ensure that protection schemes are properly coordinated across substations and adhere to evolving regulatory standards. Additionally, integrating new technologies such as digital relays and automation systems requires continuous learning and adaptation. Close collaboration with field technicians, system operators, and design teams is essential to address unexpected issues and maintain grid stability.
More about Protection And Control jobs
What cities are hiring for Protection And Control jobs? Cities with the most Protection And Control job openings:
What states have the most Protection And Control jobs? States with the most job openings for Protection And Control jobs include:
What job categories do people searching Protection And Control jobs look for? The top searched job categories for Protection And Control jobs are:
Protection And Control jobs near you
Infographic showing various Protection And Control job openings in the United States as of July 2026, with employment types broken down into 50% Full Time, and 50% Contract. Highlights an 83% In-person, and 17% Remote job distribution, with an average salary of $50,826 per year, or $24.4 per hour.

Project Manager - Protection & Control Panels

W3Global Inc.

Hurricane, UT

$75K - $95K/yr

Full-time

Posted 17 days ago

Job description

Job Title: Project Manager - Protection & Control Panels

Location: Hurricane, UT (On-site)
Job Type: Full-Time

Job Summary

We are seeking an experienced Project Manager with a strong background in industrial control panels, electrical assemblies, or protection & control (P&C) systems. This role is responsible for managing multiple customer projects from initial design through manufacturing and final delivery while ensuring projects are completed on time, within budget, and to the highest quality standards.

The ideal candidate will have an electrical background, excellent project management skills, and experience working in a manufacturing environment involving custom-built electrical equipment.

Key Responsibilities

  • Serve as the primary point of contact for customers throughout the project lifecycle.

  • Manage multiple projects simultaneously, ensuring on-time delivery, budget compliance, and customer satisfaction.

  • Review customer specifications and ensure project designs meet technical requirements and applicable industry standards.

  • Develop and release drawing packages to manufacturing teams.

  • Create and maintain Bills of Materials (BOMs), project schedules, and quality control documentation.

  • Coordinate with engineering, production, purchasing, and quality teams to ensure successful project execution.

  • Monitor project costs, schedules, and profitability while proactively managing scope changes.

  • Identify opportunities for process improvements and increased operational efficiency.

  • Provide regular project status updates to both internal stakeholders and customers.

  • Ensure all deliverables meet company quality standards and customer expectations.

Required Qualifications

  • Minimum 3 years of Project Management experience in industrial manufacturing, electrical assemblies, control panel manufacturing, or a related industry.

  • Strong understanding of industrial control panels, electrical assemblies, or build-to-spec electrical equipment.

  • Electrical background or equivalent hands-on industry experience.

  • Working knowledge of AC/DC circuits.

  • Ability to read and interpret electrical schematics, wiring diagrams, and technical drawings.

  • Experience managing project budgets, schedules, and customer expectations.

  • Strong organizational, analytical, and problem-solving skills.

  • Excellent written and verbal communication skills.

  • Ability to manage multiple concurrent projects in a fast-paced manufacturing environment.

  • Self-motivated with the ability to work independently while collaborating effectively with cross-functional teams.

Preferred Qualifications

  • Experience with AutoCAD.

  • Familiarity with Protection & Control (P&C) systems.

  • Experience creating Bills of Materials (BOMs) and manufacturing documentation.

  • Knowledge of quality control processes within electrical manufacturing.

What We're Looking For

  • Customer-focused professional with excellent relationship management skills.

  • Strong leadership and project coordination abilities.

  • Detail-oriented individual with a commitment to quality and continuous improvement.

  • Ability to prioritize competing deadlines while maintaining accuracy.

  • Team player who thrives in a collaborative manufacturing environment.

W3Global logo

About W3Global

Sourced by ZipRecruiter

W3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs. As a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.

Industry

Recruiting and staffing services

Company size

501 - 1,000 Employees

Headquarters location

Frisco, TX, US

Year founded

2006

View All W3Global Jobs