Protection And Control Engineer Jobs in Naples, FL

P&C Technician 1, 2, or 3

Powerserve Technologies is currently seeking Protection and Control (P&C) Technicians. These opportunities require that you travel to the job sites to perform the necessary work at Substations across Florida.

Responsibilities of Position

*Protection & Control Tech 1:

· Attendance, dependability, reliability and perseverance are critical to our success.

• Fluency in English language comprehension communication skills and understanding technical terminology are necessary. Continued self-improvement of those skills is a must.
• Cooperation and teamwork are essential since we all work as part of one team.
• Initiative to further one’s knowledge and perform tasks is necessary to keep up with changing technologies.
• Quality in workmanship, of character and personality is essential in our employees as our reputation is built on it.
• Good judgement is important. We stress doing what’s right over what’s easy.
• Adaptability is a key attribute since tasks, work sites and necessary skill sets can change rapidly.
• Creativity and curiosity are traits needed to continue to learn and understand the equipment, process and methods.
• Organizational and time management skills are required to be productive because of the attention to detail required.
• Teach applicable skills and knowledge to more junior technicians.
• Demonstrate advanced proficiency in AC and DC circuit theory, electronics, transformers, 3 phase systems, Boolean Algebra, etc. Assist more junior technicians with learning.
• Demonstrate thorough understanding of the theory of operation of basic relays and protection systems, devices, instrumentation transformers, SCADA, etc. Learn theory of operation of more advanced relays, protection systems, etc. Assist more junior technicians with learning this information.
• Demonstrate proficiency with drawing symbiology, ANSI/IEEE relay function numbers and how different manufactures accomplish the functions. Assist more junior technicians with learning the symbols and function numbers.
• Demonstrate logical problem-solving abilities.
• Continue to learn, understand and demonstrate advanced testing methodologies and proper use of multimeters, test equipment and testing devices. Assist more junior technicians with learning testing methods, test equipment uses and theory and testing devices.
• Draw schematic/elementary diagrams from verbal descriptions. Assist more junior engineers with understanding descriptions and how to translate into drawings.
• Demonstrate understanding and use of good Human Performance Tools and techniques in testing and record keeping techniques. Provide guidance and explanation to more junior technicians.
• Demonstrate ability to read utility and other technical drawings. Assist more junior technicians to develop this skill.
• Demonstrate the ability to identify the physical location, equipment and orientation shown on the drawings. Assist more junior technicians in locating the physical equipment from drawings.
• Demonstrate familiarity with hand and power tools and their usages. Monitor more junior technicians for proper tool selection and use; provide instruction as needed.
• Complete assigned paperwork, test forms and procedures in a timely manner. Understand the reasoning behind the forms. Explain the documents and forms to more junior technicians as needed.
• Assemble control panels from drawings.
• Develop leadership and responsibility.
• Follow all Human Performance, Safety and Environmental rules and use all procedures, processes and tools available. Take proactive steps to keep everyone safe. Stop anyone not following the rules.
• Proficiency in identifying all substation equipment and explaining the function of it. Assist more junior technicians with identification and function of this equipment.
• Be an example to others. Let your actions be a model for other teammates.

*Protection & Control Tech 2

• Attendance, dependability, reliability and perseverance are critical to our success.
• Fluency in English language comprehension communication skills and understanding technical terminology are necessary. Continued self-improvement of those skills is a must.
• Cooperation and teamwork are essential since we all work as part of one team.
• Initiative to further one’s knowledge and perform tasks is necessary to keep up with changing technologies.
• Quality in workmanship, of character and personality is essential in our employees as our reputation is built on it.
• Good judgement is important. We stress doing what’s right over what’s easy.
• Adaptability is a key attribute since tasks, work sites and necessary skill sets can change rapidly.
• Creativity and curiosity are traits needed to continue to learn and understand the equipment, process and methods.
• Organizational and time management skills are required to be productive because of the attention to detail required.
• Demonstrate proficiency in AC and DC circuit theory, electronics, transformers, 3 phase systems, Boolean Algebra, etc.
• Demonstrate understanding of the theory of operation of basic relays and protection systems, devices, instrumentation transformers, SCADA, etc. Learn theory of operation of more advanced relays, protection systems, etc.
• Demonstrate familiarity with drawing symbiology, ANSI/IEEE relay function numbers and how different manufactures accomplish the functions.
• Demonstrate logical problem-solving abilities.
• Continue to learn, understand and demonstrate advanced testing methodologies and proper use of multimeters, test equipment and testing devices.
• Demonstrate the ability to draw schematic/elementary diagrams from verbal descriptions.
• Demonstrate understanding and use of good Human Performance Tools along with testing and record keeping techniques.
• Demonstrate ability to read and understand utility and other technical drawings.
• Demonstrate the ability to identify the physical location, equipment and orientation shown on the drawings.
• Demonstrate familiarity with hand and power tools and their usages.
• Complete assigned paperwork, test forms and procedures in a timely manner. Understand the reasoning behind the forms.
• Assemble control panels from drawings.
• Develop leadership and responsibility.
• Follow all Human Performance, Safety and Environmental rules and use all procedures, processes and tools available. Take proactive steps to keep everyone safe.
• Proficiency in identifying most substation equipment and explain the it.
• Be an example to others. Let your actions be a model for other teammates.

*Protection & Control Tech 3

• Attendance, dependability, reliability and perseverance are critical to our success.
• Fluency in English language comprehension communication skills and understanding technical terminology are necessary. Continued self-improvement of those skills is a must.
• Cooperation and teamwork are essential since we all work as part of one team.
• Initiative to further one’s knowledge and perform tasks is necessary to keep up with changing technologies.
• Quality in workmanship, of character and personality is essential in our employees as our reputation is built on it.
• Good judgement is important. We stress doing what’s right over what’s easy.
• Adaptability is a key attribute since tasks, work sites and necessary skill sets can change rapidly.
• Creativity and curiosity are traits needed to continue to learn and understand the equipment, process and methods.
• Organizational and time management skills are required to be productive because of the attention to detail required.
• Demonstrate basic understanding of AC and DC circuit theory, electronics, transformers, 3 phase systems, Boolean Algebra, etc.
• Learn the theory of operation of relays from different manufactures and protective systems, devices, instrumentation transformers, SCADA, etc. Teach theory to more junior technicians.
• Learn drawing symbiology, ANSI/IEEE relay function numbers and how different manufactures accomplish the functions.
• Demonstrate logical problem-solving abilities.
• Learn, understand and demonstrate advanced testing methodologies and proper use of multimeters, test equipment and testing devices.
• Learn to draw schematic/elementary diagrams from verbal descriptions.
• Learn, understand and use good Human Performance Tools along with testing and record keeping techniques.
• Learn to read and understand utility and other technical drawings.
• Learn how to identify the physical location, equipment and orientation shown on the drawings.
• Demonstrate familiarity with hand and power tools and their usages.
• Learn how to complete assigned paperwork, test forms and procedures in a timely manner. Learn to understand the reasoning behind the forms.
• Learn how to assemble control panels from drawings.
• Begin developing leadership and responsibility.
• Learn and follow all Human Performance, Safety and Environmental rules and use all procedures, processes and tools available. Take proactive steps to keep everyone safe.
• Learn to identify all substation equipment and explain the function it.
• Be an example to others. Let your actions be a model for other teammates.

Qualifications:

P&C Tech 1:
Required:

Associate of Science in applied field (electronics, power systems, information).

Associates of Arts with pre-electrical engineering electives.

Competent in the understanding and application of Algebra and Trigonometry as it pertains to electrical theory and testing calculations.

Proficiency with calculations of 3 phase, transformer, circuit analysis, etc. parameters.

Proficiency in setting and testing overcurrent microprocessor-based relays.

One (1) year of field experience in controls or control panel wiring.

Preferred:

Familiarity with ANSI/NETA testing requirements and procedures.

Three (3) years of field experience in protection and control systems.

P&C Tech 2:
Required (Basic):

Associate of Science in applied field (electronics, power systems, information).

Associates of Arts with pre-electrical engineering electives.

Competent in the understanding and application of Algebra and Trigonometry as it pertains to electrical theory and testing calculations.

Proficiency with calculations of 3 phase, transformer, circuit analysis, etc. parameters.

Proficiency in setting and testing overcurrent microprocessor-based relays.

One (1) year of field experience in controls or control panel wiring.

Preferred:

Familiarity with ANSI/NETA testing requirements and procedures.

Two (2) years of field experience in protection and control systems.

P&C Tech 3:
Required Qualifications:

High school diploma with experience wiring control panels or similar products.

Competent in the understanding and application of Algebra and Trigonometry as it pertains to electrical theory and testing calculations.

Familiarity with 3 phase and

Introductory experience with setting and testing overcurrent microprocessor-based relays.

Experience in field control or control panel wiring.

Preferred:

Associate of Science in applied field (electronics, power systems, information).

Associates of Arts with pre-electrical engineering electives.

One (1) year documentable experience in control panel wiring and protection and control systems.

Skills and Characteristics:

Self-Motivated, detail and goal oriented.

Dependability and punctuality.

Mechanical aptitude.

Studious and motivated to learn.

Proficient in hand and power tool use.

Attentive to detail.

Time organization.

Leadership.