ZipRecruiter

Log In

1

Power Control Equipment Jobs (NOW HIRING)

Power Controls, Inc.

Be Seen First

Soldering Technician - PCB Assembly

Wallingford, CT · On-site

$22 - $24/hr

Populate power control boards with components, including occasional part preparation ... Maintain a clean and organized workstation and ensure soldering equipment is operating correctly.

Trafcon, Inc.

Striping Equipment Operator

Lincoln, NE · On-site

$24/hr

Trafcon manufactures and rents highway traffic control equipment including barricades, signs ... Knowledge of safe and efficient operation of hand and power tools-shovels, handheld power tools.

Constellium

Power Systems SME

Muscle Shoals, AL

... Equipment design. * Supervise supplier interventions during installation, challenge solutions, and refine needs. * Provide technical support for the Engineering Department for power, control, and ...

Constellium

Power Systems SME

Muscle Shoals, AL · On-site

... Equipment design. * Supervise supplier interventions during installation, challenge solutions, and refine needs. * Provide technical support for the Engineering Department for power, control, and ...

Aggreko

Shop Lead Power or Temp Control

Atlanta, GA · On-site

Bring your energy to Aggreko as a Shop Lead - Power or Temp Control based in Atlanta, GA . You'll ... Troubleshoot equipment failures at the shop and handle the repairs * You will either be out on your ...

libbey

Industrial Electrician

Toledo, OH

$33.65/hr

Install conduit and wiring for lighting, power circuits, and power control equipment * Install wiring, motors, drives, and new shop equipment per prints and instructions of the Electrical Shop ...

next page

Showing results 1-20

All JobsPower Control Equipment Jobs

Power Control Equipment information

See salary details

$12

$24

$39

How much do power control equipment jobs pay per hour?

As of Jun 21, 2026, the average hourly pay for power control equipment in the United States is $24.44, according to ZipRecruiter salary data. Most workers in this role earn between $18.03 and $30.53 per hour, depending on experience, location, and employer.
Power Control Equipment jobs near you
Infographic showing various Power Control Equipment job openings in the United States as of June 2026, with employment types broken down into 98% Full Time, and 2% Part Time. Highlights an 91% Physical, 3% Hybrid, and 6% Remote job distribution, with an average salary of $50,826 per year, or $24.4 per hour.
Gerrish Plant Control Equipment Technic

Gerrish Plant Control Equipment Technic

Milliken & Company

Pendleton, SC • On-site

Full-time

Posted 19 days ago

Milliken & Company rating

7.1

Company rating: 7.1 out of 10

Based on 31 frontline employees who took The Breakroom Quiz

23rd of 55 rated fashion and textile manufacturers

Job description

Milliken & Company is a global manufacturing leader whose focus on materials science delivers tomorrow's breakthroughs today. From industry-leading molecules to sustainable innovations, Milliken creates products that enhance people's lives and deliver solutions for its customers and communities. Drawing on thousands of patents and a portfolio with applications across the textile, flooring, chemical and healthcare businesses, the company harnesses a shared sense of integrity and excellence to positively impact the world for generations. Discover more about Milliken's curious minds and inspired solutions at Milliken.com and on Facebook, Instagram and LinkedIn.
JOB TITLE: Control Equipment Technician (CET)
REPORTS TO: Engineering Services Manager
PURPOSE: Troubleshoot the weaving machines, have knowledge concerning the operation of fans, motors, and pumps, the ability to perform preventative and breakdown maintenance on auxiliary equipment, needs an understanding of electrical circuit boards and integrate circuits
RESPONSIBILITIES:
1) Knowledge of all general plant safety rules & safety absolutes.
2) Operate equipment in a safe manner
3) Meet production goals set-out by department manager
4) Follow proper policies and procedures set out by department and location
5) Provide timely response to safety concerns and equipment failures
6) Maintain working condition and perform minor repairs on wide range of facilities and auxiliary equipment
SKILL REQUIREMENTS:
  1. Ability to read and write and follow directions
  2. Ability to comprehend written and verbal instructions
  3. Basic Math (add, subtract, multiply, divide)
  4. Good communication skills
  5. Strong discipline and ability to work both alone and in groups

MACHINES, TOOLS, AND EQUIPMENT: lift truck, tuggers, computer, band saw, grinder, welding torch, cutting torch, lathe, refrigeration machine, fluke meter, oscilloscope, air handling equipment, (pumps, fans, and controls), water jet weaving machine, hoist, electric hand tools, screwdrivers, wrenches, ladders, leno winder, solder equipment, personal protective equipment, vibration analysis equipment, drum filter, circuit board
SAFETY EQUIPMENT REQUIRED: Hearing protection in certain areas of the plant, steel toe shoes, gloves, goggles, welding shield, gloves, aprons, earplugs, Arc Flash uniform, harness
GENERAL REQUIREMENTS:
  1. Basic written and communication skills
  2. Must be able to hear power equipment operating in work area
  3. Must be able to see clearly and pass pre-employment drug screening
  4. Must be able to rotate shifts (1st and 3rd)

JOB SPECIFIC RESPONSIBILITES:
  1. Knowledge of support operator policies and procedures
  2. Completing daily team maintenance (DTM) activities
  3. Auditing safety items in department
  4. Two-year technical degree or equivalent in electronics

AUTHORIZED TRAINING TIME:
One Year
PHYSICAL REQUIREMENTS: FREQUENCY, AMOUNT, OR DESCRIPTION
  1. Standing: 60% of time at a standstill position welding, on ladders, etc.
  2. Sitting: 10% of time spent working on circuit boards, computers, and break times.
  3. Moving: 50% of time going to machines (max distance-approx. 250 ft.) getting supplies, checking condition in penthouse on roof twice per shift; walking down slope to pump station.
  4. Climbing: 5% on ladders, stairs on outside on plant to penthouse (45 stairs), working on pipes in ceiling
  5. Lifting: Must be able to lift 1-20lbs 10-50 times a day.
  6. Reaching: Must be able to reach objects on shelves or in filing cabinets which may be above shoulder height (5ft), must be able to reach and use all equipment mentioned, reaching a distance of 2-3 feet.
  7. Pushing/ Pulling: Pull main motor on dolly (10lbs), file cabinets, desk drawers, etc. approx. 50-75 times/day
  8. Visual Acuity: Must be able to read instructional material, reference manuals, meters, computer screens
  9. Bending/Stooping: Must be able to access lowest level filing cabinets and bins a minimum of 4-5 times a day, pick up items, motors, tools, get in crawl spaces, filing cabinets, desk drawers, work on a forklift.
  10. Other: Must comply with the Company rules, including but not limited to Safety, Attendance, and other job specifications.

Milliken is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to actual or perceived race, color, creed, religion, sex or gender (including pregnancy, childbirth or related medical condition, including but not limited to lactation), sexual orientation, gender identity or gender expression (including transgender status), ancestry, national origin, citizenship, age physical or mental disability, genetic information, marital status, veteran or military status or any other characteristic protected by applicable law.
To request a reasonable accommodation to complete a job application, pre-employment testing, a job interview, or to otherwise participate in the hiring process, please contact TalentAcquisition@milliken.com.
Apply now »

What Milliken & Company employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply