ZipRecruiter

Log In

1

Plc Programmer Jobs in Fort Wayne, IN (NOW HIRING)

Helion Group

Senior Automation Engineer

Saint Joe, IN · On-site

$80 - $95/hr

Senior Automation Engineer - PLC/SCADA Development Location: St. Joe, IN or Grapeland, TX Schedule: Full-time, 40+ hours/week Industry: Highly Automated Manufacturing The Opportunity We are seeking a ...

New

Helion Group

Senior Automation Engineer

Saint Joe, IN · On-site

$80 - $95/hr

Senior Automation Engineer - PLC/SCADA Development Location: St. Joe, IN or Grapeland, TX Schedule: Full-time, 40+ hours/week Industry: Highly Automated Manufacturing The Opportunity We are seeking a ...

New

PinnaclePartners

Controls Engineer

Laotto, IN

$100K - $120K/yr

Develop PLC, HMI, and industrial controls solutions for custom automated equipment. Design ... Collaborate with engineering, machining, panel build, and manufacturing teams throughout each ...

R&E Automated Systems

Be Seen First

Robot Programmer

Fort Wayne, IN · On-site

$30 - $42/hr

Configure robot I/O and communication with PLC and peripheral equipment * Lead and mentor a small team of robot programmers * Reduce cycle times and improve throughput * Perform robot mastering, TCP ...

Bosch Group

Controls Technician

Albion, IN

$27 - $35.75/hr

Electrical installation and PLC programming support for entire projects (offline and in production). * Interface with other technicians and engineering groups to achieve best solutions to process ...

Bosch Group

Controls Technician

Albion, IN

$27 - $35.75/hr

Electrical installation and PLC programming support for entire projects (offline and in production). * Interface with other technicians and engineering groups to achieve best solutions to process ...

Bosch Group

Controls Technician

Albion, IN · On-site

$27 - $35.75/hr

Electrical installation and PLC programming support for entire projects (offline and in production). * Interface with other technicians and engineering groups to achieve best solutions to process ...

Bosch Group

Controls Technician

Albion, IN · On-site

$27 - $35.75/hr

Electrical installation and PLC programming support for entire projects (offline and in production). * Interface with other technicians and engineering groups to achieve best solutions to process ...

Symbotic

New Grad- Integration Specialist

Fort Wayne, IN · On-site

$82K - $113K/yr

What we need The Integration Specialist role is to startup, commission, test PLC (Programmable Logic Controllers) controlled equipment, and complete systems integration at customer sites. You will ...

next page

Showing results 1-20

All JobsPlc Programmer JobsPlc Programmer Jobs in Fort Wayne, IN

Plc Programmer information

See Fort Wayne, IN salary details

$40K

$79.6K

$110.5K

How much do plc programmer jobs pay per year?

As of Aug 19, 2026, the average yearly pay for plc programmer in Fort Wayne, IN is $79,587.00, according to ZipRecruiter salary data. Most workers in this role earn between $67,100.00 and $91,300.00 per year, depending on experience, location, and employer.

What is a PLC programmer?

A PLC programmer oversees the programming of various machines functioning on programmable logic controller technology. PLC technology is a digital computer that controls electromagnetic processes, primarily in industrial equipment. As a PLC programmer, you are responsible for the programming and maintenance of these systems. Your duties include developing and programming new machines, reprograming existing machines, and diagnosing and repairing issues with PLC driven systems. You may work in various specialized industries, such as the medical, manufacturing, or agriculture fields. Your job is to create or update computerized machine systems so that the input, output, and control systems function optimally to meet the needs of your employer.

What are the key skills and qualifications needed to thrive as a PLC programmer?

To thrive as a PLC Programmer, you need a solid background in electrical engineering, automation, and programming logic, often supported by a relevant degree or technical diploma. Familiarity with PLC programming languages (such as Ladder Logic), HMI/SCADA systems, and manufacturer-specific software like Siemens STEP 7 or Allen-Bradley RSLogix is essential. Strong problem-solving abilities, attention to detail, and effective communication are valuable soft skills in this role. These skills and qualities are crucial for ensuring reliable automation solutions, minimizing downtime, and facilitating smooth collaboration with engineering teams.

What are some common challenges a PLC programmer might face when working on industrial automation projects?

PLC Programmers often encounter challenges such as integrating new automation systems with legacy equipment, troubleshooting unexpected machine behavior, and ensuring minimal downtime during system upgrades. They also need to collaborate closely with electrical engineers, maintenance teams, and production staff to understand process requirements and resolve issues quickly. Adaptability and strong problem-solving skills are essential, as priorities can shift rapidly based on production demands.

What is the difference between Plc Programmer vs Automation Technician?

AspectPlc ProgrammerAutomation Technician
CredentialsTypically requires a degree in electrical engineering, automation, or related field; certifications in PLC programming are commonOften has technical diploma or associate degree; certifications in PLCs and control systems are beneficial
Work EnvironmentPrimarily office-based for programming; on-site for testing and commissioningPrimarily on-site, maintaining and troubleshooting automation systems
Industry UsageUsed across manufacturing, process control, and automation industriesCommon in manufacturing, industrial maintenance, and plant operations

While both roles work with automation systems, Plc Programmers focus on developing and testing PLC software, whereas Automation Technicians handle installation, maintenance, and troubleshooting of automation equipment on-site. The roles often collaborate but differ in focus and responsibilities.

Do Plc programmers make good money?

Plc programmers typically earn competitive salaries that vary based on experience, location, and industry. Skilled programmers with knowledge of ladder logic, automation systems, and certifications tend to have higher earning potential, especially in manufacturing and industrial environments.

Is a PLC programmer in demand?

PLC programmers are in demand due to the ongoing need for automation in manufacturing, energy, and industrial sectors. Skilled professionals with knowledge of ladder logic, programming languages, and industrial control systems are sought after, especially those with certifications and experience in troubleshooting and system integration.

Is it hard to get into a PLC programmer?

Becoming a PLC programmer typically requires knowledge of PLC programming languages like ladder logic, understanding of automation systems, and often a technical degree or certification. Entry can be competitive, but gaining hands-on experience and learning relevant tools can improve job prospects.
More about Plc Programmer jobs

What are the most commonly searched types of Plc Programmer jobs in Fort Wayne, IN?

The most popular types of Plc Programmer jobs in Fort Wayne, IN are:

What are popular job titles related to Plc Programmer jobs in Fort Wayne, IN?

For Plc Programmer jobs in Fort Wayne, IN, the most frequently searched job titles are:

What job categories do people searching Plc Programmer jobs in Fort Wayne, IN look for?

The top searched job categories for Plc Programmer jobs in Fort Wayne, IN are:

What cities near Fort Wayne, IN are hiring for Plc Programmer jobs?

Cities near Fort Wayne, IN with the most Plc Programmer job openings:

Plc Programmer jobs near you
Infographic showing various Plc Programmer job openings in Fort Wayne, IN as of August 2026, with employment types broken down into 82% Full Time, 12% Contract, and 6% Nights. Highlights an 100% In-person job distribution, with an average salary of $79,587 per year, or $38.3 per hour.

Senior Automation Engineer

Helion Group

Saint Joe, IN • On-site

$80 - $95/hr

Other

Posted yesterday

New

Job description

Senior Automation Engineer – PLC/SCADA Development

Location: St. Joe, IN or Grapeland, TX

Schedule: Full-time, 40+ hours/week

Industry: Highly Automated Manufacturing

The Opportunity

We are seeking a Senior Automation Engineer to support the design, programming, integration, and commissioning of new highly automated manufacturing lines.

This is not a plant maintenance or troubleshooting-focused controls position. This engineer will work at a high level with a corporate automation team to develop the controls systems behind new equipment and production lines.

The ideal candidate is someone who can take a project from functional requirements and sequence of operations through PLC programming, HMI/SCADA development, system integration, startup, and commissioning.

What You'll Do

  • Develop PLC programs from the ground up for new automated manufacturing equipment and production lines

  • Design and implement scalable controls architecture and programming standards

  • Program and configure Allen-Bradley / Rockwell ControlLogix systems using Studio 5000

  • Develop and integrate Inductive Automation Ignition SCADA/HMI applications

  • Build PLC, HMI, SCADA, motion, safety, and industrial network functionality

  • Integrate automated equipment including motors, VFDs, servos, sensors, robotics, vision systems, and material-handling equipment

  • Translate functional specifications and sequences of operation into working controls software

  • Participate in design reviews and controls architecture decisions

  • Support FAT, equipment installation, startup, SAT, and production commissioning

  • Troubleshoot complex issues during integration and startup

  • Work with OEMs, system integrators, equipment manufacturers, operations, and engineering teams

  • Develop reusable code, standards, and automation solutions that can be deployed across future manufacturing projects

What We're Looking For

  • 10+ years of industrial automation or controls engineering experience

  • Advanced Allen-Bradley / Rockwell PLC programming

  • Strong Studio 5000 / ControlLogix experience

  • Hands-on Ignition development experience

  • Experience writing PLC programs for new machinery or automated production lines

  • Experience with HMI/SCADA development and system integration

  • Strong understanding of industrial Ethernet networks and PLC communications

  • Experience commissioning complex automated equipment

  • Ability to independently develop, test, debug, and commission controls software

Highly Preferred

  • Ignition Perspective and/or Vision development

  • Ignition UDTs, tags, alarms, historian, OPC, SQL, and scripting

  • PowerFlex VFDs

  • Kinetix servo/motion control

  • GuardLogix / safety PLC programming

  • Robotics and vision integration

  • Experience with greenfield equipment or new-line installations

  • OEM or systems integration background

  • Experience developing standardized or reusable controls code

Who Will Be Successful

We're looking for an engineer who has built automation systems—not simply maintained them.

You should be comfortable being handed a new machine or production-line concept, understanding how it needs to operate, developing the controls solution, integrating the equipment, and bringing the system through startup and production.

This is an opportunity to work on major new automation projects and have direct influence over the controls architecture and programming standards used across future manufacturing systems.

You should be proficient in:

  • Bachelor's Degree
  • ignition

Machines & technologies you'll use:

  • Vision System (Keyence, Cognex)
  • Industrial Robot (Fanuc, ABB)