ZipRecruiter

Log In

1

Pipe Fitter Apprentice Jobs in Decatur, GA (NOW HIRING)

Volarify

Apprentice Plumber (ID# 662)

Norcross, GA

$34K - $47K/yr

Apprentice Plumber (ID# 662) Full-Time | Multiple Locations Nationwide About Our Client Our Client ... Perform basic plumbing tasks such as pipe cutting, fitting assembly, and fixture installation under ...

Summit Companies

Fire Sprinkler Technician

Atlanta, GA · On-site

Modify, clean and maintain pipe systems, units and fittings * Remove and replace worn components ... Mentor and coach Fire Sprinkler Fitter Apprentice's and Helpers on proper installation techniques

Talent Consultants

Service Plumber

Marietta, GA · On-site

$25 - $32/hr

... pipes and fittings. * System Maintenance : Conduct inspections, clean drains, and maintain water ... Apprenticeship or journeyman-level training. Physical Requirements: * Ability to perform physically ...

Modigent

Service Plumber III

Decatur, GA

$35 - $45/hr

... pipes, fittings, fixtures, boilers, hydronic heating, domestic water, drainage, backflow prevention ... High school diploma or GED required; trade school, apprenticeship completion, or equivalent ...

Modigent

Service Plumber III

Atlanta, GA · On-site

$35 - $45/hr

... pipes, fittings, fixtures, boilers, hydronic heating, domestic water, drainage, backflow prevention ... High school diploma or GED required; trade school, apprenticeship completion, or equivalent ...

Plumb Works, Inc.

Plumbing Service Technician

Atlanta, GA · On-site

$80K - $125K/yr

Safely cut, assemble, and install pipes and other fittings Skills: * High school diploma or ... Diploma or certificate from a trade school, or completion of an apprenticeship * Ability to handle ...

next page

Showing results 1-20

All JobsPipe Fitter Apprentice JobsPipe Fitter Apprentice Jobs in Decatur, GA

Pipe Fitter Apprentice information

See Decatur, GA salary details

$14

$27

$38

How much do pipe fitter apprentice jobs pay per hour?

As of Aug 10, 2026, the average hourly pay for pipe fitter apprentice in Decatur, GA is $27.96, according to ZipRecruiter salary data. Most workers in this role earn between $23.70 and $30.29 per hour, depending on experience, location, and employer.

What is the difference between Pipe Fitter Apprentice vs Pipe Fitter?

AspectPipe Fitter ApprenticePipe Fitter
CredentialsTypically in training, may have minimal certificationsCompleted apprenticeship, holds relevant certifications
Work EnvironmentLearning phase, assisting experienced fitters on-sitePerforms installation, maintenance, and repair independently
Experience LevelEntry-level, gaining skills and knowledgeSkilled tradesperson with hands-on experience
Job ResponsibilitiesAssisting, learning, supporting tasksInstalling, repairing, and maintaining piping systems

The main difference between a Pipe Fitter Apprentice and a Pipe Fitter is experience and certification. Apprentices are in training, assisting experienced fitters, while Pipe Fitters are fully qualified professionals capable of independent work. Both roles are essential in the piping industry, with apprentices building skills toward becoming certified Pipe Fitters.

How much does a pipe fitter apprentice make?

A pipe fitter apprentice typically earns between $15 and $20 per hour, with annual salaries ranging from approximately $30,000 to $40,000. Wages increase with experience, certifications, and the complexity of the projects they work on, often within union or industrial settings.

How to get into pipe fitter apprentice with no experience?

To become a pipe fitter apprentice with no experience, you should typically have a high school diploma or equivalent, demonstrate physical fitness, and show interest in construction or plumbing. Many apprenticeships accept applicants without prior experience and provide on-the-job training, often requiring passing a basic skills test and meeting age requirements. Gaining familiarity with tools and safety procedures can improve your chances of acceptance into an apprenticeship program.

How hard is it to become a pipe fitter apprentice?

Becoming a pipe fitter apprentice typically requires a high school diploma or equivalent, physical fitness, and sometimes passing an aptitude test. Apprenticeship programs usually last 3 to 4 years and combine on-the-job training with classroom instruction, requiring dedication and the ability to work in confined spaces and with heavy equipment.

What is a pipe fitter apprentice?

Pipe Fitter Apprentices are individuals who are learning the trade of pipe fitting through a combination of on-the-job training and classroom instruction. They assist experienced pipe fitters in installing, assembling, fabricating, maintaining, and repairing piping systems used for heating, cooling, steam, and industrial processes. Apprenticeships typically last several years and help individuals gain the necessary skills, certifications, and experience needed to become a journeyman pipe fitter.

What are the key skills and qualifications needed to thrive as a pipe fitter apprentice?

To thrive as a Pipe Fitter Apprentice, you need a basic understanding of math, blueprint reading, and mechanical aptitude, often supported by a high school diploma or GED. Familiarity with hand and power tools, pipe threading machines, and safety certifications like OSHA 10 are typically required. Strong attention to detail, teamwork, and a willingness to learn on the job are valuable soft skills. These skills ensure safe, precise installation and maintenance of piping systems, which are critical for project success and workplace safety.

What are some common challenges faced by pipe fitter apprentices during their training period?

Pipe Fitter Apprentices often face challenges such as adapting to physically demanding work, learning to read complex blueprints, and mastering the use of specialized tools and equipment. Adjusting to a fast-paced job site environment and adhering to strict safety protocols are also key hurdles. However, these challenges provide valuable hands-on experience and mentorship opportunities, which are essential for skill development and career advancement in the trade.
What are the most commonly searched types of Pipe Fitter jobs in Decatur, GA? The most popular types of Pipe Fitter jobs in Decatur, GA are:
What job categories do people searching Pipe Fitter Apprentice jobs in Decatur, GA look for? The top searched job categories for Pipe Fitter Apprentice jobs in Decatur, GA are:
What cities near Decatur, GA are hiring for Pipe Fitter Apprentice jobs? Cities near Decatur, GA with the most Pipe Fitter Apprentice job openings:
Pipe Fitter Apprentice jobs near you
Infographic showing various Pipe Fitter Apprentice job openings in Decatur, GA as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $58,164 per year, or $28 per hour.

Experienced Sprinkler Fitter

Patriot Fire Inc.

Stockbridge, GA • On-site

Full-time

Medical, Dental, Vision, Retirement, PTO

Re-posted 28 days ago

Job description

We are looking to hire a sprinkler crew. If you have a helper that you are accustomed to working with, we would be interested but not a requirement.
Position Overview:
A Fire Protection Fitter is responsible for the installation, maintenance, and repair of fire sprinkler systems in residential, commercial, and industrial buildings. This role ensures that systems are installed according to national and local fire codes, safety regulations, and manufacturer specifications to protect life and property.
Key Responsibilities:
  1. Installation and Assembly:
    • Install and assemble fire sprinkler systems, pipes, valves, and fittings in accordance with blueprints and specifications.
    • Secure piping and other components using brackets, clamps, and tools.
  2. Maintenance and Repairs:
    • Inspect fire sprinkler systems for functionality and compliance with local codes and standards.
    • Perform routine maintenance, troubleshoot, and repair malfunctioning components.
  3. Testing:
    • Conduct hydrostatic and operational tests to ensure system reliability.
    • Work with fire inspectors to ensure systems meet safety and compliance standards.
  4. Blueprint and Code Compliance:
    • Read and interpret blueprints, schematics, and technical manuals.
    • Ensure systems comply with NFPA (National Fire Protection Association) standards and local building codes.
  5. Safety and Documentation:
    • Adhere to workplace safety regulations and procedures.
    • Maintain accurate records of installations, repairs, and inspections.
    • Provide recommendations for system upgrades or replacements.

Required Skills and Qualifications:
  • Proven experience as a fire protection fitter or similar role, 3 years experience
  • Clean 7-year MVR
  • Negative Drug Screen
  • On-Call Rotation Required
  • Knowledge of fire sprinkler systems, piping methods, and tools.
  • Ability to read and interpret blueprints, plans, and technical documents.
  • Familiarity with NFPA codes and local fire safety regulations.
  • Strong problem-solving skills and attention to detail.
  • Physical ability to work in various environments, including heights and confined spaces.
  • Effective communication skills for working with clients, contractors, and inspectors.

Education and Certifications:
  • High school diploma or equivalent.
  • Completion of an apprenticeship program in fire sprinkler fitting or related trade (preferred).
  • Valid driver's license (if travel is required).

Work Environment:
  • Construction sites, existing buildings, and industrial facilities.
  • May involve work in varying conditions, including outdoor environments and at heights.
  • Use of protective gear and adherence to strict safety protocols is required.

Benefits:
Patriot Fire Protection, Inc. offers top pay and benefits like paid health insurance, dental and vision plans offered payroll deduction, generous PTO, bonuses, and retirement match.

Apply