ZipRecruiter

Log In

1

Osha Inspector Jobs in Houston, TX (NOW HIRING)

Audubon Companies

Chief Inspector

Houston, TX

The Chief Inspector will possess strong initiative, be able to perform routine to complex ... Federal, DOT and OSHA; State and Local: codes, regulations and requirements. * Ensure accurate ...

Bureau Veritas

Building Inspector

Houston, TX · On-site

Some office work, mostly field inspections with full exposure to the elements on projects controlled by OSHA. If you are an individual with a disability and you would like us to assist you with ...

Ellwood Texas Forge

Quality Inspector II

Houston, TX · On-site

$60 - $85/hr

Ability to operate all inspection equipment such as but not limited to the following: CMM, Micro ... Properly follow company and OSHA safety procedures. Bring problems to the attention of Managers ...

GHD Group

Construction Inspector

Houston, TX · On-site

As a Contractor Inspector you will help to ensure contractor work meets project quality standards ... OSHA-10 (may be required by job). * Additional safety certifications may vary by project/site ...

GHD

Construction Inspector

Houston, TX · On-site

As a Contractor Inspector you will help to ensure contractor work meets project quality standards ... OSHA-10 (may be required by job). * Additional safety certifications may vary by project/site ...

Thompson Engineering

MEP Inspector

Houston, TX · On-site

$24 - $32/hr

The MEP Inspector is responsible for verifying that installations comply with approved drawings ... OSHA 30-Hour Construction * First Aid/CPR Mechanical * ASHRAE-related training or certifications

Full Circle

Safety Manager

Conroe, TX

Ensure compliance with OSHA regulations and applicable federal, state, and local safety requirements. * Conduct routine facility inspections, job hazard analyses (JHAs/JSAs), risk assessments, and ...

ARCXIS

Inspector

Houston, TX · On-site

ARCXIS (Houston, Texas), is the largest provider of inspection, design, engineering, and quality ... OSHA 10-Hour Training Course Certification preferred. * HVAC installation or technical experience ...

Thompson Engineering

Special Inspector

Houston, TX · On-site

$65 - $90/hr

The Special Inspector will perform inspections and tests on construction materials and activities ... OSHA 10/30 certification. Physical Requirements * Must be willing to work flexible schedules and ...

ARCXIS

Inspector

Houston, TX

ARCXIS (Houston, Texas), is the largest provider of inspection, design, engineering, and quality ... OSHA 10-Hour Training Course Certification preferred. * HVAC installation or technical experience ...

Thompson Engineering

Special Inspector

Houston, TX · On-site

The Special Inspector will perform inspections and tests on construction materials and activities ... OSHA 10/30 certification.Physical RequirementsMust be willing to work flexible schedules and ...

Thompson Engineering

Special Inspector

Houston, TX · On-site

The Special Inspector will perform inspections and tests on construction materials and activities ... OSHA 10/30 certification. Physical Requirements * Must be willing to work flexible schedules and ...

Thompson Engineering

Special Inspector

Houston, TX · On-site

The Special Inspector will perform inspections and tests on construction materials and activities ... OSHA 10/30 certification. Physical Requirements * Must be willing to work flexible schedules and ...

Thompson Engineering

MEP Inspector

Houston, TX · On-site

$24 - $32/hr

The MEP Inspector is responsible for verifying that installations comply with approved drawings ... OSHA 30-Hour Construction * First Aid/CPR Mechanical * ASHRAE-related training or certifications

Thompson Engineering

Special Inspector

Houston, TX · On-site

The Special Inspector will perform inspections and tests on construction materials and activities ... OSHA 10/30 certification. Physical Requirements * Must be willing to work flexible schedules and ...

Thompson Engineering

MEP Inspector

Houston, TX · On-site

$24 - $32/hr

The MEP Inspector is responsible for verifying that installations comply with approved drawings ... OSHA 30-Hour Construction * First Aid/CPR Mechanical * ASHRAE-related training or certifications

Full Circle

Safety Manager

Conroe, TX · On-site

$90K/yr

Ensure compliance with OSHA regulations and applicable federal, state, and local safety requirements. * Conduct routine facility inspections, job hazard analyses (JHAs/JSAs), risk assessments, and ...

previous page

Showing results 41-60

All JobsOsha Inspector JobsOsha Inspector Jobs in Houston, TX

Osha Inspector information

See Houston, TX salary details

$22.6K

$50.8K

$91.5K

How much do osha inspector jobs pay per year?

As of Sep 7, 2026, the average yearly pay for osha inspector in Houston, TX is $50,753.00, according to ZipRecruiter salary data. Most workers in this role earn between $35,600.00 and $58,700.00 per year, depending on experience, location, and employer.

What is an OSHA inspector?

OSHA Inspectors, also known as Occupational Safety and Health Administration Compliance Officers, are professionals who ensure that workplaces comply with federal safety and health regulations. They conduct inspections, investigate complaints, and assess work environments to identify potential hazards. Their main goal is to protect workers from unsafe conditions and help employers maintain compliance with OSHA standards. Inspectors may issue citations or recommend corrective actions if violations are found, helping to reduce workplace injuries and illnesses.

What are the key skills and qualifications needed to thrive as an OSHA inspector?

To thrive as an OSHA Inspector, you need a solid understanding of occupational safety regulations, hazard identification, and investigative procedures, typically supported by a degree in safety, industrial hygiene, or a related field. Familiarity with inspection tools, incident reporting software, and relevant OSHA certifications is crucial. Strong attention to detail, communication skills, and the ability to remain objective help inspectors effectively assess workplaces and interact with employers and employees. These skills ensure thorough inspections, accurate reporting, and the promotion of safe work environments in compliance with legal standards.

What are some common challenges OSHA inspectors face during workplace inspections?

OSHA Inspectors often encounter challenges such as resistance from employers or employees, complex work environments with hidden hazards, and the need to stay updated on evolving safety regulations. Balancing thorough inspections with minimal disruptions to operations is also critical. Effective communication and a strong understanding of both regulations and industry practices help inspectors navigate these challenges while ensuring workplace safety.

What is the difference between Osha Inspector vs Osha Compliance Officer?

AspectOsha InspectorOsha Compliance Officer
CertificationsOSHA 30-hour or 500-hour training, safety certificationsOSHA 30-hour or 500-hour training, safety certifications
Work EnvironmentOn-site inspections at various workplacesOffice-based, with site visits as needed
Employer & Industry UsageFederal/state agencies, construction, manufacturingCorporate safety departments, consulting firms
Primary FocusEnforcing OSHA regulations through inspectionsEnsuring compliance through audits and training

Both roles require OSHA safety certifications and involve workplace safety. While OSHA Inspectors primarily conduct on-site inspections to enforce regulations, OSHA Compliance Officers focus on maintaining compliance through audits, training, and advising organizations. The roles are complementary but differ in their approach and daily activities.

Is OSHA Inspector a good job?

OSHA inspectors evaluate workplace safety compliance and enforce regulations, often requiring knowledge of safety standards and inspection procedures. The job can be stable with opportunities for advancement, but it may involve travel, physical activity, and exposure to hazardous environments. Compensation varies by experience and location, and certifications such as the OSHA Outreach Training Program are often beneficial.

What do you need to be an OSHA inspector?

To become an OSHA inspector, candidates typically need a background in occupational safety or health, relevant work experience, and knowledge of OSHA regulations. A bachelor's degree in a related field and certification in safety or health inspection can be advantageous, along with strong communication skills and the ability to conduct thorough investigations.

What are popular job titles related to Osha Inspector jobs in Houston, TX?

For Osha Inspector jobs in Houston, TX, the most frequently searched job titles are:

What job categories do people searching Osha Inspector jobs in Houston, TX look for?

The top searched job categories for Osha Inspector jobs in Houston, TX are:

What cities near Houston, TX are hiring for Osha Inspector jobs?

Cities near Houston, TX with the most Osha Inspector job openings:

Osha Inspector jobs near you
Infographic showing various Osha Inspector job openings in Houston, TX as of August 2026, with employment types broken down into 1% As Needed, 85% Full Time, 9% Part Time, 2% Temporary, 1% Contract, and 2% Nights. Highlights an 99% Physical, and 1% Remote job distribution, with an average salary of $50,983 per year, or $24.5 per hour.

Quality Inspector II

ELLWOOD Texas Forge Houston

Houston, TX • On-site

$55 - $75/hr

Other

Re-posted 17 days ago

Job description

  • Perform all tasks in a safe and responsible manner.
  • Ability to operate all inspection equipment such as but not limited to the following: CMM, Micro Height, ID/OD micrometers, calipers, UT Machine, and Magnetic particle yokes.
  • Read and interpret blueprints, standard operating procedures, and customer/regulatory requirements and inspect parts to these documents.
  • Ability to do machine set up verification and first article inspections of parts on the machines
  • Initiate non-conformance reports and any other quality records required by ETFH, customers, and any third-party agency.
  • Initiate corrective action request when conditions adverse to part quality are repetitive in nature.
  • Ability to meet 2 NDE requirements and as a company certified NDE Level II for UT, MT, and PT.
  • Ability to perform all job duties of lower level inspections.
  • Assist in training of lower level employees.
  • Perform daily and regular cleaning in work area.
  • Properly follow company and OSHA safety procedures. Bring problems to the attention of Managers, Supervisors, and Group Leaders.
  • Follow daily procedures and protocols as set forth in job orientations and trainings.

ETFH is an Equal Opportunity Employer/Affirmative Action Employer. Minorities/Females/

Protected Veterans/Individuals with Disabilities/sexual orientation/gender identity

QualificationsEducationPreferred

High School or better in Unspecified.

Other Training or better in Quality Assurance.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.

#J-18808-Ljbffr

Apply