ZipRecruiter

Log In

1

Operator Position Jobs (NOW HIRING)

Westlake Corporation

Extruder Operator Position

Bristol, TN · On-site

$17 - $21.25/hr

Extruder Operator-Bristol REPORTS TO: Production Supervisor FLSA STATUS: Non-Exempt APPROVED BY: HR Business Partner SUMMARY Set-up and operate a minimum of six extruders producing PVC plastic ...

Techtronic Industries (TTI)

Operator I

Greer, SC · On-site

$16.75 - $22/hr

TTI Floor Care North America has an open position in the Greer Distribution Center for an Operator I . All Operators must meet the minimum requirements for the Operator position and will be required ...

TTi Floor Care

Operator I

Greer, SC

$16.75 - $22/hr

TTI Floor Care North America has an open position in the Greer Distribution Center for an Operator I . All Operators must meet the minimum requirements for the Operator position and will be required ...

Adecco

Forklift Operator

College Station, TX

$18/hr

If a Forklift Operator position sounds like something you would be interested in, and you meet the qualifications listed below, apply now! Responsibilities for a Forklift Operator include but are not ...

Garney Construction

General Operator

Lakeland, FL

$15.25 - $19.25/hr

GARNEY CONSTRUCTION A General Operator position in Lakeland, FL is available at Garney Construction. To be considered for this position you must have previous construction experience. As an operator ...

Troy University

Switchboard Operator

Troy, AL · On-site

$14 - $17.75/hr

Posting Details Position Information Posting Number SF2468P Position Title Switchboard Operator Position Type Classified Staff/Hourly Department Telecommunications - Troy Division Finance and ...

Garney Construction

General Operator

Sanford, NC · On-site

$15 - $19/hr

To be considered for this position you must have previous construction experience. As an operator, you will operate machinery to perform activities such as excavating, backfilling, trenching ...

Garney Construction

General Operator

Wilmington, NC · On-site

$15.75 - $20/hr

To be considered for this position you must have previous construction experience. As an operator, you will operate machinery to perform activities such as excavating, backfilling, trenching ...

Garney Construction

General Operator

Tampa, FL

$15.50 - $19.75/hr

GARNEY CONSTRUCTION A General Operator position in Lithia, FL is available at Garney Construction. To be considered for this position you must have previous construction experience. As an operator ...

Garney Construction

General Operator

Asheboro, NC

$15.50 - $19.50/hr

To be considered for this position you must have previous construction experience. As an operator, you will operate machinery to perform activities such as excavating, backfilling, trenching ...

Garney Construction

General Operator

North Charleston, SC

$16.25 - $20.50/hr

GARNEY CONSTRUCTION A General Operator position in Charleston, SC is available at Garney Construction. To be considered for this position you must have previous construction experience. As an ...

Adecco

Forklift Operator

Solon, OH

$18.64/hr

If this Forklift Operator position sounds like something you would be interested in, and you meet the qualifications listed below, apply now! Responsibilities for a Forklift Operator include but are ...

Garney Construction

General Operator

Newport News, VA

$15.50 - $19.50/hr

To be considered for this position you must have previous construction experience. As an operator, you will operate machinery to perform activities such as excavating, backfilling, trenching ...

Techtronic Industries (TTI)

Operator II

Wellford, SC · On-site

$15.75 - $18.50/hr

Department assignments are subsets of the Operator II position and do not supersede the Operator requirements. All employees are required to work within all facets of the Operator Position and will ...

Techtronic Industries (TTI)

Operator I

Wellford, SC · On-site

$15.75 - $18.50/hr

Department assignments are subsets of the Operator I position and do not supersede the Operator requirements. All employees are required to work within all facets of the Operator Position and will ...

Centrix Inc

Machine Operator - 2nd Shift

Shelton, CT · On-site

$17 - $20.25/hr

The Level II Machine Operator position has knowledge of all essential functions of this position. * Full knowledge of all safety issues relating to machines * Set-up of all parts run on machine with ...

next page

Showing results 1-20

All JobsOperator Position Jobs

Operator Position information

See salary details

$12

$20

$29

How much do operator position jobs pay per hour?

As of Jun 9, 2026, the average hourly pay for operator position in the United States is $20.34, according to ZipRecruiter salary data. Most workers in this role earn between $17.07 and $22.84 per hour, depending on experience, location, and employer.

What is the difference between Operator Position vs Machine Operator?

AspectOperator PositionMachine Operator
Required CredentialsHigh school diploma or equivalent; on-the-job trainingHigh school diploma or equivalent; technical training often preferred
Work EnvironmentFactories, plants, construction sitesFactories, manufacturing plants, industrial settings
Employer & Industry UsageManufacturing, construction, utilitiesManufacturing, industrial production, processing plants
Common Search & ComparisonYesYes

The term "Operator Position" generally refers to roles involving operating machinery or equipment in various industries. "Machine Operator" is a specific type of operator focused on operating particular machines in manufacturing or industrial settings. While both roles require similar credentials and work environments, "Machine Operator" is more specific to machinery handling, making it a common comparison for job seekers and employers alike.

What are operator positions?

Operator positions generally refer to jobs where individuals are responsible for running and overseeing machinery, equipment, or industrial processes in a variety of settings such as manufacturing plants, power stations, or control rooms. Operators ensure that equipment runs efficiently and safely, monitor systems, perform basic maintenance, and report malfunctions. The specific duties can vary depending on the industry and type of equipment involved, but strong attention to detail and adherence to safety protocols are usually essential in these roles.

What are the key skills and qualifications needed to thrive as an Operator, and why are they important?

To thrive as an Operator, you need a solid understanding of machinery operation, safety protocols, and a high school diploma or equivalent. Familiarity with industry-specific equipment, control systems, and often certifications like OSHA or forklift operation are typically required. Attention to detail, problem-solving, and teamwork are vital soft skills for maintaining efficiency and safety. These abilities ensure smooth operation, minimize downtime, and uphold workplace safety standards.

What are some typical daily challenges faced by operators and how can they be addressed?

Operators often encounter challenges such as equipment malfunctions, maintaining safety protocols, and meeting production targets under tight deadlines. Effective troubleshooting skills, clear communication with maintenance and supervisory teams, and adherence to standard operating procedures are key to overcoming these obstacles. Continuous training and staying proactive with routine equipment checks can also help minimize downtime and ensure smooth operations.
What cities are hiring for Operator Position jobs? Cities with the most Operator Position job openings:
What states have the most Operator Position jobs? States with the most job openings for Operator Position jobs include:
Operator Position jobs near you
Infographic showing various Operator Position job openings in the United States as of June 2026, with employment types broken down into 1% As Needed, 81% Full Time, and 18% Part Time. Highlights an 99% Physical, and 1% Remote job distribution, with an average salary of $42,306 per year, or $20.3 per hour.
Extruder Operator Position

Extruder Operator Position

Westlake Corporation

Bristol, TN • On-site

$17 - $21.25/hr

Full-time

Posted 9 days ago

Westlake Chemical rating

8.2

Company rating: 8.2 out of 10

Based on 32 frontline employees who took The Breakroom Quiz

27th of 89 rated chemical manufacturers

Job description

Westlake offers you the potential to enrich your work life and career experience in an entrepreneurial environment. We work together to enhance peoples' lives through our products and presence in the communities in which we operate.
JOB TITLE: Extruder Operator-Bristol
REPORTS TO: Production Supervisor
FLSA STATUS: Non-Exempt
APPROVED BY: HR Business Partner
SUMMARY
Set-up and operate a minimum of six extruders producing PVC plastic moulding. Perform own tooling change outs and die cleaning as well as grading own rejects.
DUTIES AND RESPONSIBILITIES
May include, but are not limited to, the following:
  • Run a minimum of six extruders maintaining correct settings.
  • Bundle and stack moulding as it is extruded.
  • Monitor color, extrusion rate, profile configuration and piece/bundle count.
  • Maintain supply of compound staged at machine.
  • Maintain extrusion equipment in proper condition.
  • Perform own tooling change outs and die cleaning and grading own rejects.
  • Assist in moving units of extruded materials when necessary.
  • Clean any burrs or fuzz off profiles and keep work area clean.
  • Ensure profiles are all turned the same direction and bundled correctly.
  • Maintain level of quality consistent with established standards.
  • Input process data into acquisition system.
  • Comply with established safety rules.
  • Comply with company policy and procedures.
  • Maintain constructive working relationships with co-workers, lead and supervisors/managers.
  • Maintain regular attendance in accordance with company policy.
  • Perform other duties as assigned to the satisfaction of supervisor and/or lead.

EDUCATION, EXPERIENCE AND QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Education/Knowledge

High school diploma or general education degree (GED).
  • Experience

One to three years industrial experience and/or training in a manufacturing environment.
  • Skills

Must be mechanically inclined and have proficient math skills. Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentages. Ability to read and comprehend simple instructions, short correspondence and memos.
  • Communication

Ability to write simple correspondence and to effectively present information in one-on-one and small situations to customers, clients and other employees of the organization. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is frequently required to talk and hear, walk, stand, use hands to finger, handle, feel objects, tools or controls, and reach with hands and arms. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl.
The employee must regularly lift and/or move up to 10 pounds and frequently lift and/or move up to 50 pounds. Employee must push a 900 pound buggy approximately 200 feet six to eight times a day. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, peripheral vision and the ability to adjust focus.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee regularly works near moving mechanical parts, and is occasionally exposed to airborne particles.
The noise level in the work environment is usually loud.
Westlake is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any characteristics protected by applicable legislation.
If you are an active Westlake employee (or an employee of any Westlake affiliates), please do not apply here. You will apply via the Jobs Hub application in Workday.

What Westlake Chemical employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply