Advanced Scaffold Builder
$20.25 - $26/hr
Oil and gas construction industry (refinery, chemical plant or large oil rig or processing plant ... Cut Pliers h) Hand Saw PHYSICAL REQUIREMENTS: The physical demands described here are ...
$20.25 - $26/hr
Oil and gas construction industry (refinery, chemical plant or large oil rig or processing plant ... Cut Pliers h) Hand Saw PHYSICAL REQUIREMENTS: The physical demands described here are ...
$20.25 - $26/hr
Oil and gas construction industry (refinery, chemical plant or large oil rig or processing plant ... Cut Pliers h) Hand Saw PHYSICAL REQUIREMENTS: The physical demands described here are ...
Mobile, AL · On-site
$42 - $50/hr
... barges, deck barges, dump scows, oil spill recovery vessels, crane barges hopper barges and more ... Ability to operate a hand-cutting torch efficiently and produce quality cuts. * Blueprint reading ...
Quick apply
Mobile, AL · On-site
$42 - $50/hr
... barges, deck barges, dump scows, oil spill recovery vessels, crane barges hopper barges and more ... Ability to operate a hand-cutting torch efficiently and produce quality cuts. * Blueprint reading ...
$25 - $32/hr
... oil lines. They follow blueprints and use hand tools and shop machines. The pipefitter also cuts and bores holes in bulkheads and decks for installation of pipes. They operate shop machines to cut ...
$25 - $32/hr
... oil lines. They follow blueprints and use hand tools and shop machines. The pipefitter also cuts and bores holes in bulkheads and decks for installation of pipes. They operate shop machines to cut ...
$25 - $32/hr
... oil lines They follow blueprints and use hand tools and shop machines. The pipefitter also cuts and bores holes in bulkheads and decks for installation of pipes. They operate shop machines to cut and ...
$25 - $32/hr
... oil lines They follow blueprints and use hand tools and shop machines. The pipefitter also cuts and bores holes in bulkheads and decks for installation of pipes. They operate shop machines to cut and ...
Daphne, AL · On-site
$21 - $26/hr
Ability to use hand and power tools applicable to trade * Knowledge of basic equipment and vehicle ... Previous experience as an HDD Rig Operator * Knowledge of Vermeer & Digitrak equipment * Ability to ...
Quick apply
Daphne, AL · On-site
$21 - $26/hr
Ability to use hand and power tools applicable to trade * Knowledge of basic equipment and vehicle ... Previous experience as an HDD Rig Operator * Knowledge of Vermeer & Digitrak equipment * Ability to ...
$12.11 - $13.70
8% of jobs
$14.60 is the 25th percentile. Wages below this are outliers.
$13.70 - $15.30
30% of jobs
The median wage is $16.45 / hr.
$15.30 - $16.90
16% of jobs
$16.90 - $18.49
1% of jobs
$18.49 - $20.09
0% of jobs
$20.09 - $21.68
0% of jobs
$21.68 - $23.28
0% of jobs
$23.28 - $24.88
3% of jobs
$24.88 - $26.47
15% of jobs
$26.47 - $28.07
0% of jobs
$28.12 is the 75th percentile. Wages above this are outliers.
$28.07 - $29.66
26% of jobs
$12
$20
$29
Oil Rig Deck Hands usually work long shifts, often on a rotational schedule such as two weeks on the rig followed by two weeks off, depending on the employer and location. The work environment is physically demanding and primarily outdoors, with exposure to varying weather conditions and rigorous safety protocols. Teamwork is an essential part of daily life, as deck hands collaborate closely with crew members to maintain equipment, handle cargo, assist with drilling operations, and respond to emergencies. These roles can be challenging but often come with opportunities for overtime pay and clear career progression into more specialized or supervisory positions.
To thrive as an Oil Rig Deck Hand, you need physical stamina, mechanical aptitude, and a high school diploma or equivalent, often with prior experience in manual labor or maritime settings. Familiarity with hydraulic equipment, forklifts, and basic safety certifications such as HUET (Helicopter Underwater Escape Training) and Basic Offshore Safety Induction and Emergency Training (BOSIET) are commonly required. Strong teamwork, adaptability, and clear communication set standout candidates apart in this role. These qualities ensure safe, efficient operations in demanding offshore environments where collaboration and precise execution are critical.
An Oil Rig Deck Hand is an entry-level position responsible for maintaining the deck, operating equipment, and assisting in loading and unloading supplies. They perform manual labor, handle heavy machinery, and ensure safety protocols are followed. This role requires physical stamina, teamwork, and adherence to strict safety regulations. Deck Hands often work long shifts in challenging offshore environments and have opportunities to advance to higher positions in the oil and gas industry.
7.4
Based on 38 frontline employees who took The Breakroom Quiz
286th of 486 rated machine equipment manufacturers
REPORTS TO: Scaffold Supervisor directly, as well as, indirectly to the Site Foreman.
SUPERVISES: N/A
DUTIES / RESPONSIBILITIES:
QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:
Comparable employer is defined as:
ADDITIONAL GUIDELINES:
All candidates must meet Austal USA's basic employment eligibility guidelines:
TOOLS: REQUIRED TOOLS LIST
a) Hammer (Steel)
b) 7/8'' Wrench
c) Scaffold Wrench (optional)
d) 8"- 10" Crescent Wrench
e) Torpedo Level
f) 25' Tape Measure
g) 9 " Side Cut Pliers
h) Hand Saw
PHYSICAL REQUIREMENTS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites.
While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit.
Specific physical requirements include the following:
Must have the ability to bend, squat, stoop, crawl, and kneel. Perform prolonged standing. Ability to turn head from side to side and about the vertical axis. Ability to turn body at the waist from side to side and about the vertical axis. Lift/push/pull 50lbs to 75lbs on an occasional basis. Lift/push/pull up to 20lbs on a frequent basis. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps). Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts. Able to work at a variety of levels (ex. waist, eye, overhead). Demonstrate the ability to safely and appropriately use required tools and equipment. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles. Possess sufficient handgrip and coordination to carry and operate tools and equipment. Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards. Ability to withstand cold and hot temperatures. Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time. Able to respond to verbal and audible sounds/commands. Able to utilize adequate visual skills. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud, + 90 dB.
SAFETY
Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
Equal Employment Commitment
Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932.
Austal's commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.
Get the full story on Breakroom
Sourced by ZipRecruiter
Manufacturing
1,001 - 5,000 Employees
Mobile, AL, US