ZipRecruiter

Log In

1

Non Destructive Testing Inspector Jobs in Stockton, CA

Gexpro Services

Quality Inspector

Livermore, CA · On-site

The ideal candidate for the Warehouse and Quality Inspection Specialist role will have a ... Associate Degree/Trade School (2 yr. min.) in Quality/Material Composition, Non-Destructive testing ...

Gexpro Services

Quality Inspector

Livermore, CA · On-site

Quality Inspector Description: The ideal candidate for the Quality Inspector will have Quality ... Associate Degree/Trade School (2 yr. min.) in Quality/Material Composition, Non-Destructive testing ...

FM Industries

Welder/Brazer Lead

Livermore, CA · On-site

$31 - $41/hr

Conduct thorough inspections of welded joints to verify compliance with quality standards, performing visual and non-destructive testing (NDT) as necessary, and implementing corrective actions to ...

FM Industries

Manufacturing Engineer 3 - NPI

Livermore, CA · On-site

$130K - $150K/yr

Experience developing and coordinating failure analysis test plans (destructive and non-destructive). * Expertise in testing techniques such as helium leak testing, rate of rise testing, hydrostatic ...

NATIONS ROOF LLC

Superintendent- Roofing

Stockton, CA · Remote

$90K - $130K/yr

Conduct destructive testing, such as cutting into hand welds, to verify proper techniques are used ... Coordinate delivery of warranties, change orders, and inspection reports. * Ensure timely ...

BSK Associates

Senior Special Inspector

Livermore, CA

$41.02 - $58.71/hr

... testing as needed. Ability to clearly write daily field reports and non-conformance reports ... Driver's License (Required) ICC Inspector, ACI, and Caltrans Certifications (Preferred for some ...

DeRuosi Nut

Be Seen First

Quality Control Inspector for Walnuts

Escalon, CA · On-site

$16.90 - $20/hr

Perform incoming inspections on walnut lots, including sampling, sizing, moisture testing, and ... Identify and report non-conformances to supervisors for corrective action. * Verify correct lot ...

Stantec

Environmental Inspector

Stockton, CA · On-site

Use of in-field sampling / testing equipment such as pH monitors, HACH meters, colorimetric test ... of non-compliance, coordinate to ensure needed corrective actions are implemented in a timely ...

Johnson Controls

Fire Detection Inspector 1

Livermore, CA

$22.60 - $31.25/hr

Installation or Service Experience in testing and inspecting Fire Alarm Equipment. * Self-starter ... To view more information about your equal opportunity and non-discrimination rights as a candidate ...

Johnson Controls

Fire Detection Inspector 1

Livermore, CA · On-site

$22.60 - $31.25/hr

Installation or Service Experience in testing and inspecting Fire Alarm Equipment. * Self-starter ... To view more information about your equal opportunity and non-discrimination rights as a candidate ...

Astrix Inc

Incoming QC Lab Technician

Livermore, CA · On-site

$21 - $24/hr

Perform sampling and testing of packaging materials and incoming raw materials according to ... Document inspection results accurately in quality reports, noting deviations or non-conformances.

Astrix Inc

Quality Control Technician

Livermore, CA · On-site

$22 - $28.25/hr

Perform in-process inspections, including start-up checks, first article verification, and routine ... Identify, document, and escalate non-conformances; take appropriate action when quality standards ...

BSK Associates

Engineering Technician

Livermore, CA

$30.79 - $41.12/hr

Perform compaction testing of earthwork and pavement, sample concrete, and perform batch plant inspection on a regular basis. Ability to clearly write daily field reports and non-conformance reports.

next page

Showing results 1-20

All JobsNon Destructive Testing Inspector JobsNon Destructive Testing Inspector Jobs in Stockton, CA

Non Destructive Testing Inspector information

See Stockton, CA salary details

$13

$28

$54

How much do non destructive testing inspector jobs pay per hour?

As of Jul 29, 2026, the average hourly pay for non destructive testing inspector in Stockton, CA is $28.82, according to ZipRecruiter salary data. Most workers in this role earn between $19.52 and $33.17 per hour, depending on experience, location, and employer.

What is the difference between Non Destructive Testing Inspector vs Welding Inspector?

AspectNon Destructive Testing InspectorWelding Inspector
CertificationsASNT, AWS NDT certificationsCWI (Certified Welding Inspector), AWS certifications
Work EnvironmentIndustrial sites, manufacturing plants, constructionWelding sites, fabrication shops, construction projects
Industry UsageOil & gas, aerospace, power generationConstruction, manufacturing, shipbuilding

Both roles require certifications like AWS or ASNT and involve inspecting materials and welds. However, Non Destructive Testing Inspectors focus on testing methods such as ultrasonic, radiographic, or magnetic particle testing, while Welding Inspectors primarily examine weld quality and adherence to standards. Understanding these differences helps professionals choose the right certification and career path in the industry.

What are the key skills and qualifications needed to thrive as a Non Destructive Testing Inspector, and why are they important?

To thrive as a Non Destructive Testing (NDT) Inspector, you need a solid understanding of materials science, inspection techniques, and industry standards, typically supported by NDT Level I, II, or III certifications. Familiarity with technical tools such as ultrasonic, radiographic, magnetic particle, and dye penetrant testing equipment is essential. Strong attention to detail, analytical thinking, and effective communication help inspectors accurately interpret results and report findings. These skills and qualifications are crucial for ensuring the safety, reliability, and compliance of structures and components in industries like aerospace, construction, and manufacturing.

Is a NDT inspector a good career?

A Non-Destructive Testing (NDT) inspector is a skilled professional who uses techniques like ultrasonic, radiographic, or magnetic testing to evaluate materials without causing damage. The role offers steady employment opportunities, especially in industries such as manufacturing, aerospace, and energy, often requiring certifications like ASNT. It can be a rewarding career for those interested in technical work and safety standards.

How do you become an NDT inspector?

To become a Non-Destructive Testing (NDT) inspector, individuals typically complete specialized training and obtain certification from recognized organizations such as ASNT or NAS. They often need a high school diploma or equivalent, relevant work experience, and proficiency in techniques like ultrasonic, radiographic, or magnetic particle testing. Continuous education and recertification are required to maintain credentials and stay current with industry standards.

What is the highest paying NDT job?

The highest paying NDT (Non-Destructive Testing) jobs are often senior-level inspector roles, such as Level III inspectors, or specialized positions like ultrasonic testing or phased array ultrasonic testing inspectors. These roles typically require advanced certifications, extensive experience, and may involve working in high-risk industries like aerospace, oil and gas, or nuclear power, which offer higher salaries. Salaries can vary based on location, industry, and certifications held.

What are some common challenges faced by Non Destructive Testing Inspectors in the field?

Non Destructive Testing Inspectors often face challenges such as working in confined or hazardous environments, adhering to strict safety protocols, and maintaining accuracy under pressure. They must also manage tight project deadlines and adapt to rapidly changing site conditions. Effective communication with engineers and other team members is essential to ensure that inspection results are clearly understood and acted upon. Staying current with evolving testing technologies and industry standards is also important for ongoing success in this role.

Is NDT in high demand?

Non-Destructive Testing (NDT) inspectors are in high demand across industries such as manufacturing, aerospace, and energy due to the need for quality assurance and safety compliance. The profession often requires certifications like ASNT and skills in various testing methods, which contribute to steady employment opportunities.

What is a Non Destructive Testing (NDT) Inspector?

A Non Destructive Testing (NDT) Inspector is a professional who examines materials, components, or structures for defects or irregularities without causing any damage to them. They use specialized techniques such as ultrasonic, radiographic, magnetic particle, and dye penetrant testing to assess the integrity and safety of products in industries like manufacturing, aerospace, and construction. Their work is crucial for ensuring that equipment and structures meet safety and quality standards while remaining operational. NDT Inspectors document their findings and often recommend repairs or further analysis if issues are detected.

What Does a Non-Destructive Testing Inspector Do?

A non-destructive testing inspector determines the safety of structures, vessels, or vehicles using ultrasound, fiber optics, x-ray, or similar equipment. As a non-destructive testing inspector, your responsibilities include testing equipment and hardware, inspecting materials, developing new or adapting existing NDT methods to solve problems, and properly documenting all testing procedures, processes, methods, and results. You use radio astronomy, rheometric flow measurement, and amperage and voltage measurement to evaluate material properties, detect object flaws by making radiographic images, use sonic measurements to map object imperfections, and use a variety of equipment and tools, such as closed circuit television systems or endoscopes to visually examine structures and materials.

More about Non Destructive Testing Inspector jobs
What are popular job titles related to Non Destructive Testing Inspector jobs in Stockton, CA? For Non Destructive Testing Inspector jobs in Stockton, CA, the most frequently searched job titles are:
What job categories do people searching Non Destructive Testing Inspector jobs in Stockton, CA look for? The top searched job categories for Non Destructive Testing Inspector jobs in Stockton, CA are:
What cities near Stockton, CA are hiring for Non Destructive Testing Inspector jobs? Cities near Stockton, CA with the most Non Destructive Testing Inspector job openings:
Non Destructive Testing Inspector jobs near you
Infographic showing various Non Destructive Testing Inspector job openings in Stockton, CA as of July 2026, with employment types broken down into 8% Locum Tenens, 67% Full Time, 21% Part Time, 1% Temporary, 2% Contract, and 1% Nights. Highlights an 93% Physical, 1% Hybrid, and 6% Remote job distribution, with an average salary of $59,940 per year, or $28.8 per hour.

Non-Destructive Testing Technician

Total Aerospace Services

Stockton, CA

$21 - $26/hr

Full-time

Medical, Dental, Vision, Life, Retirement

Re-posted 18 days ago

Job description

Job Summary:
Join our client's team at Stockton, CA - a leading provider of maintenance, repair, and overhaul (MRO) services for military engines and accessories.
As a Non-Destructive Testing Technician (NDT Tech), you will conduct vital tests on turbine engines and components using Liquid Penetrant and Magnetic Particle methods. Reporting to the Director of Quality Systems, you will examine structures for anomalies, interpret findings, and ensure compliance with technical orders.

Responsibilities:

  • Conduct non-destructive testing on parts to identify porosity, fusion, depth, cracks, and other defects.
  • Inspect various structures including welds, castings, and machined components.
  • Interpret testing results accurately to accept or reject items according to technical guidelines.
  • Collaborate effectively with team members and support efficient manufacturing processes.
  • Perform setup, daily checks, and maintain process performance standards.

Qualifications:

  • 1-2 years of experience in magnetic particle and liquid penetrant testing.
  • ANST Level II certification preferred.
  • High School diploma or GED required; AA degree a plus.
  • Strong organizational, communication, and decision-making skills.
  • Detail-oriented with a positive attitude and ability to work in a fast-paced environment.

Benefits:

  • Competitive pay range of $21.00 - $26.00 per hour.
  • Health, dental, vision, and life insurance coverage.
  • 401K plan and Employee Assistance Program.
  • 11 Paid Holidays annually.
Don't miss this opportunity to be part of a dynamic team in a cutting-edge industry. Apply now to join their dedicated and talented workforce in a role that offers growth and development opportunities.