ZipRecruiter

Log In

1

Non Destructive Inspection Jobs in Georgia (NOW HIRING)

HLBMA LLC

Quality Engineer

Ellabell, GA · On-site

$66K - $85K/yr

Perform visual inspections and non-destructive tests where appropriate * Reject defective products and approve correct products * Keep work environments safe and efficient at all times * Support the ...

chromalloy

NDT Technician 3rd shift

Newnan, GA · On-site

NDT Inspector is responsible for non-destructive evaluation of gas turbine engine components including such NDT processes as FPI, MPI, Laser, C-Scan, eddy current and X-Ray. PRIMARY DUTIES AND ...

chromalloy

NDT Technician 3rd shift

Newnan, GA · On-site

NDT Inspector is responsible for non-destructive evaluation of gas turbine engine components including such NDT processes as FPI, MPI, Laser, C-Scan, eddy current and X-Ray. PRIMARY DUTIES AND ...

KSB SE and Co KGaA

Foundry Quality Technician

Thomson, GA · On-site

$16.50 - $22.25/hr

... of inspection and testing equipment. • Conduct material testing including chemical analysis (ARL), tensile testing, and basic metallurgical evaluations as required. • Perform non-destructive ...

chromalloy

NDT Technician 3rd shift

Newnan, GA · On-site

NDT Inspector is responsible for non-destructive evaluation of gas turbine engine components including such NDT processes as FPI, MPI, Laser, C-Scan, eddy current and X-Ray. PRIMARY DUTIES AND ...

chromalloy

NDT Technician 3rd shift

Newnan, GA

NDT Inspector is responsible for non-destructive evaluation of gas turbine engine components including such NDT processes as FPI, MPI, Laser, C-Scan, eddy current and X-Ray. PRIMARY DUTIES AND ...

Mistras

NDT UT II Shear Wave (SWUT) Technician

Atlanta, GA · On-site

  • Medical

  • Retirement

  • PTO

The ideal candidate will perform advanced non-destructive examinations using ultrasonic shear wave ... This position requires a strong understanding of ultrasonic inspection principles, applicable ...

chromalloy

NDT Technician 3rd shift

Newnan, GA · On-site

NDT Inspector is responsible for non-destructive evaluation of gas turbine engine components including such NDT processes as FPI, MPI, Laser, C-Scan, eddy current and X-Ray. PRIMARY DUTIES AND ...

chromalloy

NDT Technician 3rd shift

Newnan, GA

NDT Inspector is responsible for non-destructive evaluation of gas turbine engine components including such NDT processes as FPI, MPI, Laser, C-Scan, eddy current and X-Ray. PRIMARY DUTIES AND ...

chromalloy

NDT Technician 3rd shift

Newnan, GA · On-site

NDT Inspector is responsible for non-destructive evaluation of gas turbine engine components including such NDT processes as FPI, MPI, Laser, C-Scan, eddy current and X-Ray. PRIMARY DUTIES AND ...

chromalloy

NDT Technician 3rd shift

Newnan, GA

NDT Inspector is responsible for non-destructive evaluation of gas turbine engine components including such NDT processes as FPI, MPI, Laser, C-Scan, eddy current and X-Ray. PRIMARY DUTIES AND ...

previous page

Showing results 41-60

All JobsNon Destructive Inspection JobsNon Destructive Inspection Jobs in Georgia

Non Destructive Inspection information

See Georgia salary details

$9

$16

$26

How much do non destructive inspection jobs pay per hour?

As of Aug 18, 2026, the average hourly pay for non destructive inspection in Georgia is $16.74, according to ZipRecruiter salary data. Most workers in this role earn between $12.98 and $19.09 per hour, depending on experience, location, and employer.

What is non destructive inspection?

Non Destructive Inspection (NDI) refers to a range of testing and analysis techniques used to evaluate the properties of a material, component, or system without causing any damage. These methods are commonly used in industries such as aerospace, manufacturing, and construction to detect flaws, cracks, or defects that could affect safety or performance. Techniques include ultrasonic testing, radiography, magnetic particle testing, and dye penetrant inspection. NDI allows for thorough inspection and quality assurance while leaving the tested item intact and functional.

What are the key skills and qualifications needed to thrive as a non destructive inspection technician?

To thrive as a Non-Destructive Inspection Technician, you need a solid understanding of physical sciences, attention to detail, and typically a background in engineering technology or a related field, often with NDT Level I or II certification. Familiarity with technical tools such as ultrasonic, radiographic, magnetic particle, and eddy current testing equipment is essential. Strong analytical thinking, effective communication, and strict adherence to safety protocols help individuals excel in this role. These skills are crucial to accurately detect material flaws, ensure structural integrity, and maintain safety standards in industries like aerospace, manufacturing, and construction.

What are some common challenges faced by non destructive inspection technicians, and how can they be managed on the job?

NDI technicians often encounter challenges such as working in confined or hard-to-reach areas, interpreting ambiguous results, and handling a variety of testing equipment. Managing these challenges typically involves following strict safety protocols, maintaining strong attention to detail, and continuously updating technical knowledge through training. Collaboration with engineers, production teams, and quality assurance personnel is essential to ensure accurate assessments and to address any discrepancies in testing outcomes. Regular communication and thorough documentation help in resolving uncertainties and maintaining high standards of safety and reliability.

What is the difference between Non Destructive Inspection vs Non Destructive Testing?

AspectNon Destructive InspectionNon Destructive Testing
CertificationsASNT Level I/II/III, API certificationsSame certifications as inspection often required
Work EnvironmentField sites, industrial plants, manufacturing facilitiesLaboratories, field sites, manufacturing environments
PurposeVisual and physical assessment of equipment and structuresTesting methods to detect flaws or defects
UsageInspection and evaluation of existing assetsQuality assurance, research, and development

Non Destructive Inspection focuses on visual and physical assessments of equipment, while Non Destructive Testing employs specific testing methods to identify flaws. Both roles require similar certifications and are used in similar environments, but their primary objectives differ: inspection evaluates condition, testing detects defects.

Are non destructive inspection inspectors in demand?

Non-destructive inspection (NDI) inspectors are in steady demand across industries such as manufacturing, aerospace, and energy, where quality control and safety are critical. The need for skilled inspectors with certifications like ASNT increases employment opportunities, especially as infrastructure and equipment require regular inspection and maintenance.

How much do non-destructive inspection inspectors make?

Non-destructive inspection inspectors typically earn between $50,000 and $80,000 annually, depending on experience, certifications, and industry. Advanced skills and certifications like ASNT Level III can lead to higher salaries, especially in specialized or high-demand sectors such as aerospace or energy.

Is non destructive inspection testing a good career?

Non-destructive inspection (NDI) is a stable career that involves evaluating materials and structures without causing damage, often requiring certifications such as ASNT or AWS. It offers opportunities in industries like aerospace, manufacturing, and energy, with potential for advancement and steady employment. NDI professionals typically work in controlled environments and use tools like ultrasonic, radiographic, or magnetic testing equipment.
Non Destructive Inspection jobs near you
Infographic showing various Non Destructive Inspection job openings in Georgia as of August 2026, with employment types broken down into 1% As Needed, 73% Full Time, 16% Part Time, 7% Contract, and 3% Nights. Highlights an 92% Physical, 3% Hybrid, and 5% Remote job distribution, with an average salary of $34,823 per year, or $16.7 per hour.

Quality Assurance - NDT Technician 1st shift

chromalloy

Newnan, GA • On-site

Full-time

Re-posted 9 days ago

Chromalloy rating

8.1

Company rating: 8.1 out of 10

Based on 26 frontline employees who took The Breakroom Quiz

155th of 490 rated machine equipment manufacturers

Job description

 

POSITION SUMMARY: 

NDT Inspector is responsible for non-destructive evaluation of gas turbine engine components including such NDT processes as FPI, MPI, Laser, C-Scan, eddy current and X-Ray.  

PRIMARY DUTIES AND RESPONSIBILITIES:

  • Performs tasks such as Laser inspection II, Ultrasonic inspection II, X-Ray inspection II, up to MPI/FPI level II processing and inspection.
  • May performs tasks such as dimensional inspection, visual inspection, C of C generation, incoming inspection, repair work scope generation and regulatory paperwork in accordance with work instructions, blueprints, and customer specifications.
  • Performs all work in accordance with plant safety rules and maintains highest quality standards in the execution of all assigned work.
  • Performs routine preventative maintenance on all machines and other routine labor work as required in accordance with production flow.
  • Operator prepares necessary quality documents and confirms quality of own work using inspection tools in accordance with product specifications, blueprints, drawings, and work instructions.
  • Operator to adhere to all 5s / CPEX policies and to have a continuous improvement mindset.

EDUCATION AND WORK EXPERIENCE: 

  • Must have HS Diploma or GED. Strong shop mathematics, including addition, subtraction, multiplication, division, decimals and fractions required.
  • On the job experience of 3-5 years as inspector in manufacturing environment.
  • On the job experience of 5+ years in manufacturing environment preferred.
  • MPI/FPI level II cert preferred
  • X-Ray level II cert preferred
  • Must be able to follow instructions, read and interpret blue prints.
  • Must be able to work in a team environment.  

WORK ENVIRONMENT:  This position will require the employee to wear the following specific PPE that will be provided by the company: Steel toes shoes, hearing protection, safety glasses 

What Chromalloy employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply