1

Network Installer Jobs in Utah (NOW HIRING)

Network Administrator Network Administrator, Journeyman Hill Air Force Base Ogden, Utah HX5 is an ... installation of communications cabling, including CAT5 and fiber cabling. * Plan, coordinate ...

Network Security Engineer

Clearfield, UT · On-site

$99 - $225/hr

You'll then share your expertise during the planning of acquisition, installation, configuration, and maintenance of network components. From resolving interoperability issues across platforms, to ...

New

Must have datacenter network design and architecture experience to include installation and configuration of Cisco routers, switches, firewalls, and IPSEC virtual private networks The Benefits ...

Network Engineer 1

Bluffdale, UT · On-site

$45.92 - $79.48/hr

Must have datacenter network design and architecture experience to include installation and configuration of Cisco routers, switches, firewalls, and IPSEC virtual private networks The Benefits ...

Network Engineer 3

Bluffdale, UT · On-site

$72.67 - $114.70/hr

Must have datacenter network design and architecture experience to include installation and configuration of Cisco routers, switches, firewalls, and IPSEC virtual private networks. The Benefits ...

Must have datacenter network design and architecture experience to include installation and configuration of Cisco routers, switches, firewalls, and IPSEC virtual private networks. The Benefits ...

Showing results 21-40

Network Installer information

How do I become a network installer?

To become a network installer, you typically need a high school diploma or equivalent, along with technical training or certification in networking, such as CompTIA Network+ or Cisco CCNA. Gaining hands-on experience through apprenticeships or entry-level positions helps develop skills in installing, configuring, and troubleshooting network systems. Strong problem-solving abilities and familiarity with tools like routers and switches are also important for success in this role.

What is the difference between Network Installer vs Cable Technician?

AspectNetwork InstallerCable Technician
CertificationsCompTIA Network+, Cisco CCNA (sometimes)CompTIA A+, OSHA safety certifications
Work EnvironmentIndoor/outdoor, installation sites, data centersResidential/commercial buildings, cable lines
Industry UsageTelecommunications, internet providers, networking companiesCable TV, internet service providers, telecommunications

Network Installers focus on setting up and maintaining network infrastructure, including wiring and hardware for data and voice networks. Cable Technicians primarily install and repair cable TV and internet services. While both roles involve wiring and technical skills, Network Installers often work on larger, more complex network systems, whereas Cable Technicians handle consumer-level installations and repairs.

What does a network installer do?

A network installer sets up and maintains computer networks, including installing cables, configuring hardware and software, and testing network connections to ensure proper operation. They often work in environments such as offices or data centers and may need technical certifications or knowledge of networking tools like routers and switches.

What are some common challenges faced by network installers during on-site deployments?

Network Installers often encounter challenges such as unexpected site conditions, outdated infrastructure, or limited access to network areas that can delay installations. Coordinating with other contractors or facility managers is frequently necessary to resolve these issues efficiently. Additionally, maintaining minimal disruption to normal business operations while installing or upgrading network systems requires careful planning and clear communication with clients and team members. Adapting quickly to changing environments and troubleshooting technical problems on-the-fly are essential skills in this role.

What are the key skills and qualifications needed to thrive as a network installer?

To thrive as a Network Installer, you need a solid understanding of network infrastructure, cabling, and troubleshooting, often supported by a technical diploma or certifications like CompTIA Network+. Familiarity with tools such as cable testers, punch-down tools, and network mapping software is typically required. Attention to detail, problem-solving abilities, and effective communication with clients and team members are standout soft skills. These skills ensure reliable network setup, minimize downtime, and promote efficient collaboration in diverse work environments.
What are popular job titles related to Network Installer jobs in Utah? For Network Installer jobs in Utah, the most frequently searched job titles are:
What job categories do people searching Network Installer jobs in Utah look for? The top searched job categories for Network Installer jobs in Utah are:
What cities in Utah are hiring for Network Installer jobs? Cities in Utah with the most Network Installer job openings:
Infographic showing various Network Installer job openings in Utah as of August 2026, with employment types broken down into 67% Full Time, and 33% Contract. Highlights an 100% In-person job distribution.

Full-time

Re-posted 6 days ago


Job description

Odyssey Systems is seeking a Network Administrator to support the Training Division (AFLCMC/WNR) at Hill Air Force Base in Ogden, Utah. The WNR Division serves as the Air Force’s technical, acquisition, and sustainment authority, delivering comprehensive and mission-critical support to the war-fighter. The division supports a broad portfolio of Air Force systems including Electronic Warfare, Range Systems, Air Combat Training, Command and Control Systems, Advanced Radar Threat Systems, and Combat Survivor Evader Locater systems. The division also provides ongoing support to depot-level sustainment efforts, Foreign Military Sales (FMS), and partners across the U.S. Army, Navy, PACAF, ACC, AFMC, and AETC.

This role specifically supports the Live Mission Operations Capability (LMOC) program. LMOC enables real-time weapon modeling and automated data delivery for live training and debrief environments, enhancing training fidelity, density, and effectiveness across mission planning, execution, reconstruction, and review.


In this Advisory and Assistance Services (A&AS) role, the Senior Network Administrator provides expert-level technical support to Department of Defense (DoD) programs by assisting government leadership with planning, execution, and decision-making throughout the acquisition life-cycle.

The Network Administrator will perform a wide range of duties supporting both classified and unclassified systems. Responsibilities include, but are not limited to, the following functional areas:

System and Network Administration
  • Provide system administration support for LAN, WAN, web, and communication systems across classified and unclassified environments

  • Support network security for command and control systems

  • Provide classified communication venues for product teams to discuss sensitive requirements, designs, and system shortfalls

  • Assist with assessment, development, implementation, management, maintenance, and administration of LANs, electronic messaging services, telecommunications infrastructure, and government IT services

  • Perform VMware server administration, including high-availability server solutions

  • Assist with installation of communications cabling, including CAT5 and fiber cabling

  • Plan, coordinate, install, and analyze government-furnished computer systems

  • Develop and implement system upgrades to ensure availability, integrity, efficiency, and reliability of IT infrastructure

  • Conduct analysis of system usage, user complaints, traffic interruptions, and hardware/software performance

Application and Help Desk Support
  • Assist with development of web-based IT equipment management systems and government software applications

  • Provide help desk support, including management of IT trouble tickets

  • Support user access to government acquisition and life-cycle applications such as ABSS, CAS, CPARs, JCALS, JEDMICS, DSAMS, and related systems

 CyberSecurity  and Certification Support
  • Develop documentation and artifacts required to certify classified and unclassified network systems

  • Support DIACAP or RMF certification efforts for classified and unclassified infrastructure

  • Review proposed system and software designs for security risks and usability

  • Advise government leadership on system security shortfalls and improvement areas

Systems Integration and Analysis
  • Resolve integration issues between new systems and existing infrastructure

  • Monitor emerging technologies to recommend effective solutions

  • Perform systems analysis for project tracking systems

  • Support IT and communications systems including network infrastructure, wireless systems, and voice systems


Must be a U.S. citizenMinimum Required Qualifications

Clearance: Must have and be able to maintain a Secret Clearance 

Education & Experience: Master’s or Bachelor’s degree in a related field with at least 3 years of experience in the respective discipline, including 3 years in the DoD, OR

    • 7 years of directly related experience, including 5 years in the DoD

Certifications:

  • DoD 8570.01-M Information Assurance Technical (IAT) Level II certification (e.g., Security+ CE, CCNA Security, etc.)
Preferred Qualifications

Technical Skills

  • Experience in information systems technology and computer science

  • Background in business systems

  • Proficiency with LAN/WAN environments and VMware server administration

  • Experience supporting classified and unclassified networks

  • Familiarity with DIACAP or RMF processes

  • Knowledge of government IT applications including ABSS, CAS, CPARs, JCALS, JEDMICS, and DSAMS

Interpersonal Skills

  • Strong problem-solving and analytical abilities

  • Effective communication with technical and non-technical stakeholders

  • Experience supporting DoD personnel and cross-functional teams

  • Ability to manage help desk operations in a classified environment

Additional Information

Location: Hill AFB, Ogden, UT

Work Schedule: On-site

Travel: Less than 10%

#LI-JG1


Odyssey Systems is a world-class technical, engineering, and integration company serving the warfighting ecosystem with airborne integration, ISR, C2, and warfighter readiness capabilities. Odyssey meets the military’s operational needs by integrating layered defense systems from equipment, technology, and services to data, information, and business operations. We streamline defense acquisition and sustainment, engineering the technical battlefield with domain-specific proficiency to ensure lethality. Odyssey is dedicated to excellent contract execution, peak organizational performance, and fostering a workplace built on employee care.

Odyssey is proud to live out our core values of commitment, ambition, and respect in our work and communities through OdysseyCares, a philanthropic group focused on giving back through direct donations, an employer match program, and volunteering events.

Please note: Final compensation for this position will be determined by various factors such as the Federal Government contract labor categories and contract wage rates, relevant work experience, specific skills and competencies, geographic location, education, and certifications.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities