ZipRecruiter

Log In

1

Network Field Tech Jobs in Houston, TX (NOW HIRING)

WhiteWater Express Car Wash

IT Field Tech

Houston, TX · On-site

Responsibilities : • Prepare and execute deployment plans for IT projects and in-field support. • Install and configure POS, network devices, and peripherals. • Serve as liaison between the ...

WhiteWater Express Car Wash

IT Field Tech

Houston, TX · On-site

Install and configure POS, network devices, and peripherals. * Serve as liaison between the ... Serve as in-field tech support for IT Support team requiring advanced support or when unable to ...

Whitewater Express Car Wash

IT Field Tech

Houston, TX · On-site

$55K - $60K/yr

Install and configure POS, network devices, and peripherals. * Serve as liaison between the ... Serve as in-field tech support for IT Support team requiring advanced support or when unable to ...

Whitewatercw

IT Field Tech

Houston, TX · On-site

Install and configure POS, network devices, and peripherals. * Serve as liaison between the ... A Bachelor's degree in Information Technology, Computer Science, or a related field; OR 5+ years of ...

WhiteWater Express Car Wash

IT Field Tech

Houston, TX · On-site

Install and configure POS, network devices, and peripherals. * Serve as liaison between the ... A Bachelor's degree in Information Technology, Computer Science, or a related field; OR 5+ years of ...

Netsync Network Solutions

Network Technician

Houston, TX · On-site

$22.50 - $29/hr

Netsync Network Solutions is a leading provider of network and IT solutions, dedicated to helping ... Continued technical education in the networking field. * Assist with end user compute repairs.

Netsync Network Solutions

Network Technician

Houston, TX · On-site

$22.50 - $29/hr

Netsync Network Solutions is a leading provider of network and IT solutions, dedicated to helping ... Continued technical education in the networking field. * Assist with end user compute repairs.

Netsync Network Solutions

Network Technician

Houston, TX · On-site

$22.50 - $29/hr

Netsync Network Solutions is a leading provider of network and IT solutions, dedicated to helping ... Continued technical education in the networking field. * Assist with end user compute repairs.

PRIMORIS USA

IT Field Network Technician

Houston, TX · On-site

The IT Field Network Technician will lead the planning and onsite installation, repair, and support of the IT server, network and security systems, and low-voltage cabling. Engage with business ...

next page

Showing results 1-20

All JobsNetwork Field Tech JobsNetwork Field Tech Jobs in Houston, TX

Network Field Tech information

See Houston, TX salary details

$14

$25

$37

How much do network field tech jobs pay per hour?

As of Sep 12, 2026, the average hourly pay for network field tech in Houston, TX is $25.44, according to ZipRecruiter salary data. Most workers in this role earn between $21.59 and $27.79 per hour, depending on experience, location, and employer.

What is a network field tech?

Network Field Techs, also known as Network Field Technicians, are professionals who install, maintain, and troubleshoot networking equipment and infrastructure at client sites or in the field. Their responsibilities often include configuring routers, switches, and wireless devices, performing network upgrades, and diagnosing connectivity issues. They work both independently and as part of a team to ensure reliable network performance for businesses and organizations. Network Field Techs frequently travel to various locations to provide on-site technical support and repairs. This role requires strong technical skills, problem-solving abilities, and good communication to interact with clients and team members.

What are the key skills and qualifications needed to thrive as a network field tech, and why are they important?

To thrive as a Network Field Tech, you need a solid understanding of networking fundamentals, troubleshooting, and hardware installation, often supported by a relevant associate degree or certifications like CompTIA Network+ or Cisco CCNA. Familiarity with network testing tools, cable testers, routers, switches, and remote diagnostic systems is typically required. Strong problem-solving skills, attention to detail, and effective communication help you excel when working independently or with clients on-site. These skills and qualifications are crucial for maintaining reliable network infrastructure and ensuring minimal downtime for organizations.

What are some common challenges network field techs face when working on-site, and how can they be addressed?

Network Field Techs often encounter challenges such as unexpected environmental conditions, limited access to network equipment, or outdated documentation while working on-site. These issues can be managed by thorough pre-visit planning, maintaining clear communication with on-site contacts, and keeping up-to-date with the latest network diagrams and manuals. Additionally, developing strong troubleshooting skills and adaptability helps resolve issues efficiently, ensuring minimal downtime for clients.

What is the difference between Network Field Tech vs Cable Installer?

AspectNetwork Field TechCable Installer
CertificationsCompTIA Network+, Cisco CCNA (preferred)Basic electrical or cable installation certifications
Work EnvironmentOutdoor/indoor, technical troubleshooting, network setupIndoor/outdoor, cable installation, wiring
Industry UsageTelecommunications, internet providers, enterprise networksCable TV, internet service providers, residential/commercial wiring

Network Field Techs and Cable Installers both work in the telecommunications industry, often outdoors and in customer locations. However, Network Field Techs focus on network setup, troubleshooting, and maintaining internet and data services, requiring technical certifications like CompTIA Network+ or Cisco CCNA. Cable Installers primarily handle wiring and installing cable systems, often with basic electrical certifications. While their roles overlap in installation environments, Network Field Techs have a broader technical scope related to network infrastructure.

Network Field Tech jobs near you
Infographic showing various Network Field Tech job openings in Houston, TX as of September 2026, with employment types broken down into 89% Full Time, and 11% Contract. Highlights an 100% In-person job distribution, with an average salary of $52,924 per year, or $25.4 per hour.

Network Field Engineer

Houston, TX • On-site

Resolution Technologies
51 - 200 employees
Learn more about Resolution Technologiesexternal

Other

Posted 18 days ago

Job description

Job Description
NETWORK ENGINEER
MERGER & ACQUISITION NETWORK INTEGRATION
Location Approximately up to 50% onsite at corporate HQ, Houston, Texas Travel Approximately up to 50% to company locations, offices, data centers, and field sites, including yards, shops, and construction or utility sites Hours Cutover and maintenance work frequently falls in evening and weekend windows NETWORK ENGINEER POSITION SUMMARY
We are seeking a Network Engineer to support its Merger and Acquisition (M&A) program. This is a hands-on role for an engineer who works directly in network devices - assessing acquired environments, building and configuring standard equipment, executing site cutovers, and troubleshooting through to resolution.
The work is project-based and spans the full delivery lifecycle - discovery, documentation, bill of materials, procurement support, step-by-step implementation planning, and execution. The engineer produces the plan and then carries it out.
NETWORK ENGINEER RESPONSIBILITIES
Discovery, documentation, and planning
  • Perform discovery and validation at acquired sites - circuits, IP addressing, routing, switching, wireless, firewalls, network access control, remote access, and dependencies - establishing ground truth by inspection rather than relying on existing documentation.
  • Assess current state, identify architectural risks, and contribute to target-state design and per site integration plans.
  • Build site bills of materials - switches, access points, edge routers, optics, licensing, PoE and power, racks, cabling, and spares - and support procurement on part selection, entitlements, and lead times.
  • Write step-by-step implementation and cutover plans with pre-checks, sequenced steps, validation, go / no-go criteria, and per site rollback.
  • Track new job site and branch office builds through 's service management system, following the process applicable to each request type.
  • Maintain accurate diagrams, configurations, procedures, and as found and as built documentation.
Implementation and cutover
  • Stage, install, and configure standard network, security, and wireless equipment; rack, cable, label, and commission at acquired offices, yards, shops, and data center spaces.
  • Replace acquired switching and wireless with standard equipment.
  • Execute site cutovers and circuit migrations in approved change windows, coordinated with the acquired company's change control process.
  • Coordinate with M&A project teams, infrastructure and security teams, local IT contacts, carriers, vendors, and field technicians.
  • Troubleshoot issues arising from integration work using logs, packet captures, and device output to identify root cause; escalate high-impact issues while continuing to drive resolution, keeping stakeholders clearly updated.
Transition support
  • Support the acquired company's existing network platforms through the transition period. These vary by acquisition and commonly include Fortinet, Meraki, and Palo Alto.
  • Where elements of the acquired environment remain in service during transition - typically the WAN and a firewall supporting their legacy VPN - maintain them and make routing changes as sites migrate.
  • Maintain connectivity between and the acquired environment throughout a phased, multi-site cutover.
  • Identify and resolve overlapping IP space between the acquired environment and, and account for the DNS consequences of the approach chosen - re-IP of DNS servers at headquarters and main branch sites carries significant downstream impact.
Cisco platform engineering
  • Configure and troubleshoot Cisco SD-WAN routers and Cisco switches at the IOS / IOS-XE CLI - edge device configuration, device and feature templates, policy, application-aware routing, QoS, path selection, and link failover - and resolve control-connection and data-plane faults.
  • Deploy Catalyst 9200 and 9300 access switching, including stacking, uplinks and port-channels, PoE budgeting, VLAN and trunk design, and spanning-tree behavior.
  • Build and maintain Cisco wireless on Catalyst 9800-80 wireless LAN controllers - WLAN profiles, policy profiles, policy tags, site tags, and RF tags and profiles - and install and troubleshoot Catalyst 9120 / 9130 and current-generation Wi-Fi 6E / 7 access points, including AP join and provisioning, mounting and PoE, coverage and RF, and client onboarding. Aironet 2800 and 3800 series are encountered at acquired sites.
  • Onboard sites into Cisco ISE, including switch and controller configuration for 802.1X and MAB, and troubleshoot wired and wireless authentication failures.
  • Administer and troubleshoot Cisco Secure Firewall (FTD) - security policy, NAT, VPN, and routing - including site-to-site VPN tunnels to third parties where required.
  • Design, build, and validate failover behavior: transport and path failover, dual-edge and dual-circuit handoffs, first-hop redundancy, and convergence - tested rather than assumed.
NETWORK ENGINEER REQUIRED QUALIFICATIONS
  • 5+ years of hands-on network engineering or network operations experience, including contributing to network architecture or design.
  • Fluent Cisco IOS / IOS-XE configuration and troubleshooting at the CLI.
  • Hands-on experience with Cisco Catalyst 9200 / 9300 access switching and Catalyst 8161, 8235, and 8355 SD-WAN routers, or directly comparable platforms; Catalyst 9500 and Nexus exposure useful for larger sites.
  • Hands-on Cisco SD-WAN experience, including edge device configuration, templates, policy, and troubleshooting.
  • Hands-on Cisco wireless experience, including Catalyst 9800-80 controller configuration (WLAN, policy, site and RF tags) and physical access point installation and troubleshooting.
  • Hands-on Cisco Secure Firewall (FTD) administration - policy, NAT, IPsec VPN, and routing.
  • Practical 802.1X / MAB network access control experience and the ability to troubleshoot authentication failures end to end; Cisco ISE experience strongly preferred.
  • Routing depth across SD-WAN overlay, LAN, and failover behavior, including maintaining connectivity between environments during a phased migration.
  • Fluent IP subnetting and address planning, including identifying and resolving overlapping address space. This will be assessed directly in the technical screen.
  • Strong understanding of TCP/IP, VLANs, trunking, STP, routing, NAT, ACLs, VPNs, QoS, DHCP, and DNS.
  • Experience producing bills of materials and supporting procurement for site builds; ability to interpret and create network diagrams and translate requirements into implementable designs.
  • Experience troubleshooting with CLI tools, logs, packet captures, and monitoring platforms.
  • Demonstrated ability to rack, cable, stage, configure, and replace network equipment and access points.
  • Experience working under formal change control; strong communication skills with technical and nontechnical stakeholders; and the ability to work independently in a technically demanding enterprise environment.
NETWORK ENGINEER PREFERRED QUALIFICATIONS
  • Cisco CCNA or CCNP, or equivalent hands-on experience.
  • Cisco ISE hands-on administration - policy sets, authorization profiles, and profiling.
  • Experience with other vendors such as Meraki, Fortinet, and Palo Alto is helpful, since acquired environments frequently run them.
  • Experience with M&A, divestiture, site integration, or network consolidation work - particularly supporting multiple vendor platforms through a phased cutover, or migrating between SD-WAN platforms.
  • Network automation with Python, Ansible, or vendor APIs - configuration generation, bulk validation, and reporting.
  • Experience supporting distributed, multi-site, or field-based organizations, including construction, utility, or industrial environments.
#MCB
#DICEJOBS
#RT
Meet Your Recruiter

I'm happy to connect with you on your next career challenge. Whatever your needs are, we at Resolution Technologies promise to provide unrivaled quality and service. Please don't hesitate to contact me if you have any questions about this position.

*Warning* Please beware of job offer scams! Individuals falsely representing themselves as employees of Resolution Technologies and many other recruiting firms are contacting candidates with fake job offers. Please do not provide these individuals with any information and report them to your local authorities. We are not affiliated with Nick Hassan, Nick Sullivan, or the email domain resolutiontech-jobs.com. Please call us at to verify job opportunities.

Apply