ZipRecruiter

Log In

1

Micro Welding Jobs in California (NOW HIRING)

BBSI San Jose

Assembler

San Jose, CA · On-site

$20 - $23/hr

Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment.

Ambrit Engineering - USA

Mold Maker

Santa Ana, CA · On-site

$45 - $48/hr

TIG, laser, or micro-welding experience. * Experience with hot runner systems and complex multi-cavity molds. * Leadership or mentoring experience within a tool room environment. Benefits

Ambrit Engineering

Mold Maker

Santa Ana, CA

$45 - $48/hr

TIG, laser, or micro-welding experience. * Experience with hot runner systems and complex multi-cavity molds. * Leadership or mentoring experience within a tool room environment. Benefits

Bio-Rad Laboratories

Moldmaker/Toolmaker

Santa Rosa, CA · On-site

$80K - $110K/yr

Utilize welding techniques (e.g., TIG micro-welding) to rebuild worn areas, repair damaged components, and support mold refurbishment while maintaining dimensional accuracy and surface integrity.

Stellant Systems

Micro-Electronics Assembler

Torrance, CA · On-site

$25 - $35/hr

Micro-Electronics Asembler Job Location: Torrance, CA Salary: $25.00-$35.00/hr This is an hourly ... MIC assembly consisting of brazing, die attach, wedge-wedge bonding and gap welding. * Responsible ...

Stellant Systems

Micro-Electronics Assembler

Torrance, CA · On-site

$25 - $35/hr

Micro-Electronics Asembler Job Location: Torrance, CA Salary: $25.00-$35.00/hr This is an hourly ... MIC assembly consisting of brazing, die attach, wedge-wedge bonding and gap welding. * Responsible ...

Flex Ltd

Building Wireman (2nd Shift)

Fontana, CA · On-site

$18.59 - $25.10/hr

Assemble electrical systems and install components, units, subassemblies, wiring, or conduit using rivets, bolts, soldering or micro-welding equipment * Run wire and cable according to schematics and ...

Flex

Building Wireman (2nd Shift)

Fontana, CA · On-site

$18.59 - $25.10/hr

Assemble electrical systems and install components, units, subassemblies, wiring, or conduit using rivets, bolts, soldering or micro-welding equipment * Run wire and cable according to schematics and ...

Flex Ltd

Building Wireman (2nd Shift)

Fontana, CA

$18.59 - $25.10/hr

Assemble electrical systems and install components, units, subassemblies, wiring, or conduit using rivets, bolts, soldering or micro-welding equipment * Run wire and cable according to schematics and ...

Flex Ltd

Panel Wireman (2nd Shift)

Fontana, CA · On-site

$18.59 - $25.10/hr

Assemble electrical systems and install components, units, subassemblies, wiring, or conduit using rivets, bolts, soldering or micro-welding equipment * Run wire and cable according to schematics and ...

Flex Ltd

Panel Wireman (2nd Shift)

Fontana, CA

$18.59 - $25.10/hr

Assemble electrical systems and install components, units, subassemblies, wiring, or conduit using rivets, bolts, soldering or micro-welding equipment * Run wire and cable according to schematics and ...

next page

Showing results 1-20

All JobsMicro Welding JobsMicro Welding Jobs in California

Micro Welding information

See California salary details

$24

$41

$56

How much do micro welding jobs pay per hour?

As of Aug 23, 2026, the average hourly pay for micro welding in California is $41.07, according to ZipRecruiter salary data. Most workers in this role earn between $33.94 and $46.73 per hour, depending on experience, location, and employer.

What is a micro welding?

A Micro Welding job involves performing precision welding on small or delicate components using specialized techniques such as laser welding or TIG welding under a microscope. Micro welders work in industries like aerospace, medical device manufacturing, and electronics, where high accuracy and minimal heat distortion are crucial. They use fine electrodes and controlled energy to join tiny parts, often requiring steady hands and attention to detail.

What are the key skills and qualifications needed to thrive in micro welding?

To thrive as a Micro Welder, you need exceptional manual dexterity, keen attention to detail, and a solid understanding of welding techniques, often supported by a technical diploma or relevant certification. Familiarity with precision welding equipment such as laser welders, microscopes, and specialized micro-welding tools is essential. Strong problem-solving skills, patience, and effective communication help you excel in team settings and high-precision tasks. These qualities are necessary to produce high-quality welds on miniature components, where errors can be costly and quality standards are exacting.

What are some common challenges faced by micro welders in their daily work?

Micro welders often work with extremely small and delicate components, which requires a high level of precision and steadiness. One common challenge is maintaining focus during repetitive and meticulous tasks, as even a minor mistake can compromise the integrity of a part. Additionally, micro welders must frequently adjust to varying materials and tight tolerances while working under magnification for extended periods. Collaboration with engineers and quality control teams is also common, ensuring that each weld meets strict specifications and industry standards.

How much does a micro welder make?

Micro welders typically earn between $40,000 and $70,000 annually, depending on experience, certifications, and industry. Skilled micro welders working in specialized fields or with advanced equipment can earn higher wages, especially with certifications in precision welding techniques.

What are the most commonly searched types of Micro Welding jobs in California?

The most popular types of Micro Welding jobs in California are:

What are popular job titles related to Micro Welding jobs in California?

For Micro Welding jobs in California, the most frequently searched job titles are:

What job categories do people searching Micro Welding jobs in California look for?

The top searched job categories for Micro Welding jobs in California are:

Micro Welding jobs near you
Infographic showing various Micro Welding job openings in California as of August 2026, with employment types broken down into 91% Full Time, 6% Part Time, 1% Contract, and 2% Nights. Highlights an 100% Physical job distribution, with an average salary of $85,421 per year, or $41.1 per hour.

Assembler

BBSI San Jose

San Jose, CA • On-site

$20 - $23/hr

Full-time

Medical, Dental, Vision, Retirement, PTO

Re-posted 23 days ago

Job description

  • Perform all Assembler 1 and 2 job duties, responsibilities and requirements.
  • Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products.
  • Utilize hand held tools such as a hand held screw and drill gun.
  • Performing soldering.
  • Maintain Customers and Company Quality requirements.
  • Identify product defects and complete appropriate documentation when defects are identified.
  • Rework and/or repair assembled equipment and products according to engineering specification changes.
  • Use thinking and reasoning to solve a problem and to think in such a way as to produce a new concept or idea.

·        Train others to assemble, install, inspect and minor electromechanical systems.

·        Train others on the Hardware machines.

  • Responsible to meet ISO quality standards, which require individuals to take responsibility for their own quality, verify their work is correct and then affix their signature to the appropriate documentation (i.e., drawing, checklist, etc.).
  • Inspect wiring installations, assemblies, and circuits.
  • Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment.
  • Pack finished products for shipment.
  • Tag components.
  • Adjust or repair electrical equipment. preferred
  • Correct defects.
  • Test product to ensure conformance to specifications.
  • Build products such as electric motors, computers, electronic control devices, and sensing equipment. preferred
  • Verify dimensions and clearances of parts to ensure conformance to blueprint specifications, using instruments, such as micrometers, calipers, and height gauges.
  • Populate or modify/replace components on printed circuit board assemblies preferred
  • Test functional performance preferred

Large chassis builds preferred