ZipRecruiter

Log In

1

Mechanical Inspector Jobs in Atlanta, GA (NOW HIRING)

Kelso Industries

Quality Inspector

Atlanta, GA

If this sounds like you, then you should mull over a career with Mullins Mechanical. We are looking for an experienced, self-motivated Quality Inspector to join our team in Canton, MS. This position ...

Posted today

DeKalb County

Building Inspector

Decatur, GA · On-site

$50K - $81K/yr

Conducts field inspections throughout the County at project sites for code compliance, including ... Mechanical) according to area of assignment. May be required to obtain and maintain additional ...

DeKalb County

Building Inspector

Decatur, GA · On-site

$50K - $81K/yr

Conducts field inspections throughout the County at project sites for code compliance, including ... Mechanical) according to area of assignment. May be required to obtain and maintain additional ...

Actalent

Roadway Inspector

North Metro, GA

Monitor construction of 21 bridges and associated structures, including mechanically stabilized ... Inspect rock cuts, rock blasting operations, portland cement concrete (PCC) paving, and asphalt ...

Pae

UH60 Aircraft Technical Inspector

Marietta, GA

$60K - $80K/yr

The UH60 Aircraft Technical Inspector is responsible for ensuring that assigned aircraft are ... Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other ...

Amentum

UH60 Aircraft Technical Inspector

Marietta, GA · On-site

$60K - $80K/yr

The UH60 Aircraft Technical Inspector is responsible for ensuring that assigned aircraft are ... Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other ...

UL Solutions

Building Inspector - Southeast

Atlanta, GA · On-site

$85K - $95K/yr

University Degree (Equivalent to Associates degree) in Mechanical, Electrical, or Fire Safety Engineering preferred * Related discipline plus generally five years' experience as an inspector ...

Work For Warriors Georgia

QUALITY INSPECTOR

Norcross, GA · On-site

$23/hr

Perform incoming/outgoing inspection of materials and components following quality of work ... Mechanical "hands-on" experience. * Experience with ISO 9001:2015 a plus. * Able to read, interpret ...

TRC Talent Solutions

Mechanical Engineer

Griffin, GA

$75K - $95K/yr

We are seeking a Mechanical Engineer to support the design and development of custom-engineered ... inspection of fabricated components and finished assemblies. -Collaborate with production ...

previous pagenext page

Showing results 21-40

All JobsMechanical Inspector JobsMechanical Inspector Jobs in Atlanta, GA

Mechanical Inspector information

See Atlanta, GA salary details

$15

$29

$44

How much do mechanical inspector jobs pay per hour?

As of Aug 7, 2026, the average hourly pay for mechanical inspector in Atlanta, GA is $29.09, according to ZipRecruiter salary data. Most workers in this role earn between $24.09 and $31.97 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as a mechanical inspector, and why are they important?

To thrive as a Mechanical Inspector, you need a solid understanding of mechanical systems, blueprint reading, and quality assurance principles, typically supported by a relevant technical degree or certification. Familiarity with inspection tools, measurement devices, and standards such as ASME or ISO is commonly required. Attention to detail, problem-solving ability, and effective communication are standout soft skills in this role. These competencies are crucial for ensuring that mechanical components meet safety, reliability, and regulatory standards in various industries.

What are some common challenges mechanical inspectors face when working on large-scale projects?

Mechanical Inspectors working on large-scale projects often encounter challenges such as coordinating inspections across multiple teams, ensuring compliance with strict safety and quality standards, and managing tight deadlines. They must frequently review complex technical drawings and specifications, requiring strong attention to detail and effective communication with engineers, contractors, and project managers. Adapting to changing project scopes and resolving discrepancies quickly are essential for maintaining project timelines and quality.

What is the difference between Mechanical Inspector vs Mechanical Technician?

AspectMechanical InspectorMechanical Technician
CertificationsASNT, API, or equivalent quality assurance certificationsTechnical diplomas or certifications in mechanical systems
Work EnvironmentInspection sites, quality control labs, manufacturing facilitiesMaintenance workshops, installation sites, repair facilities
Primary ResponsibilitiesInspect and verify mechanical components meet standardsInstall, maintain, and repair mechanical systems

Mechanical Inspectors focus on quality assurance and compliance through inspections, while Mechanical Technicians handle installation, maintenance, and repairs. Both roles often work in manufacturing or industrial settings and may require similar certifications, but their core duties differ significantly.

What does a mechanical inspector do?

A Mechanical Inspector is responsible for examining and testing mechanical systems, equipment, and installations to ensure they meet safety standards, codes, and regulations. Their duties often include reviewing blueprints, conducting on-site inspections, documenting findings, and recommending corrective actions if any deficiencies are found. Mechanical Inspectors work in a variety of industries, such as construction, manufacturing, and facilities maintenance, to help ensure that machinery and systems operate safely and efficiently.

What does a mechanical inspector do?

A mechanical inspector performs a variety of quality assurance duties related to building codes and electrical maintenance. Your responsibilities include inspecting the installation and upkeep of all kinds of electrical and mechanical systems, such as furnaces, boilers, HVAC or air conditioning systems, and elevators in residential and commercial buildings. You inspect these systems to ensure they are functioning properly and do not violate any building or safety codes. You may work on construction sites to observe the installation and technical calibration of systems, or for existing buildings to write reports based on your inspections.

More about Mechanical Inspector jobs
What are popular job titles related to Mechanical Inspector jobs in Atlanta, GA? For Mechanical Inspector jobs in Atlanta, GA, the most frequently searched job titles are:
What job categories do people searching Mechanical Inspector jobs in Atlanta, GA look for? The top searched job categories for Mechanical Inspector jobs in Atlanta, GA are:
Mechanical Inspector jobs near you
Infographic showing various Mechanical Inspector job openings in Atlanta, GA as of August 2026, with employment types broken down into 88% Full Time, 8% Part Time, 3% Contract, and 1% Nights. Highlights an 97% Physical, 1% Hybrid, and 2% Remote job distribution, with an average salary of $60,508 per year, or $29.1 per hour.

Quality Inspector - Lithia Springs, Ga

Mullins Mechanical

Lithia Springs, GA

Part-time

Medical, Dental, Vision, Life, Retirement, PTO

Posted 10 days ago

Job description

About You
Are you knowledgeable about quality and safety regulations in construction environments? Do you engage and advise job site leadership regarding quality programs and best practices? If this sounds like you, then you should mull over a career with Mullins Mechanical.

We are looking for an experienced, self-motivated Quality Inspector to join our team in Canton, MS. This position will involve working outside in extreme weather conditions, exposure to loud noises and abnormal odors, confined space work, and working in areas with overhead activities.

Our Commitment
Our commitment to excellence in safety, quality, customer service, and professionalism has earned us a top-notch reputation in the industry. Built on client relationships, our project teams are committed to providing services with integrity that will uphold our prestige within the industry.
We realize that our greatest asset is our people. We offer competitive compensation and benefits packages that include medical, dental, vision, life, disability, paid holidays, paid vacation, and 401K.

Responsibilities

  • Create, interpret, and understand Weld Map Isometric drawings using computer software programs
  • Enter welding and inspection information into the tracking tool
  • Assist with pressure testing plans and functions
  • Assemble project documentation packages
  • Perform and document inspections based on drawings, specifications, and procedures to determine compliance
  • Test welders and perform weld inspections under various codes
  • Follow Project Quality Assurance Plans
  • Follow Inspection and Test Plans (I&TPs)
  • Assist Site Quality Manager with various daily activities as assigned
  • Maintain commitment to Mullins core values and safety policies


Qualifications

  • Knowledge and experience from working under a Quality Management Program
  • Minimum 4 years of professional experience working as Quality Inspector and/or Quality Technician
  • Must hold a current AWS CWI, ASNT VT II, and/or API 510/570 certifications
  • Extensive knowledge of NDT methods (UT, MT, PT, RT)
  • Understanding of ASTM standards and materials
  • Efficient in Microsoft Excel, Word, and construction project management software (Procore preferred)
  • Ability to work as a team and communicate effectively with co-workers
  • Excellent interpersonal, written, and verbal communication skills
  • High level of organizational skills
  • Extensive knowledge of reading and understanding drawings
  • Must be a quick learner and self-motivated with the drive to learn and grow
  • Ability to travel and relocate as needed
  • Experience working to customer specifications
  • Experience with the verification of mechanical equipment alignment
  • Extensive knowledge of codes and standards (ASME, AWS, ACI, AISC, NACE)
  • Ability to work in a fast-paced environment
  • Must be willing and able to climb up and down stairs and ladders while working on scaffolds and in trenches to access work
  • Must be comfortable lifting up to 50 pounds, standing for extended periods, and walking on uneven terrain for extended periods
  • Must have a valid driver’s license, proof of insurability, and ability to pass an MVR background check

Apply