ZipRecruiter

Log In

1

Manual Turner Jobs (NOW HIRING)

Ezeflow - Flowline

Precision Machinist

New Castle, PA · On-site

$21.50 - $25/hr

Ezeflow USA, Inc. - Flowline Division is seeking an experienced Manual and/or CNC Lathe Machinist to join our manufacturing team located in New Castle, PA. The Precision Machinist role plays a key ...

RHEINMETALL

Fitter & Turner - Machinist

Brisbane, CA · On-site

The general and generic duties of the Fitter & Turner - Machinist include, but are not limited to ... Proficient in reading and interpreting technical drawings, manuals and specifications; * Milling ...

RHEINMETALL

Fitter & Turner - Machinist

Brisbane, CA · On-site

The general and generic duties of the Fitter & Turner - Machinist include, but are not limited to ... Proficient in reading and interpreting technical drawings, manuals and specifications; * Milling ...

Turner Construction

Engineer

Augusta, GA · On-site

Turner Construction is an industry leading commercial construction general contractor with a 120 ... Maintenance manuals (O&Ms), attic stock, and spare parts, and evaluating information to insure ...

Turner Construction

Engineer

Augusta, GA · On-site

Turner Construction is an industry leading commercial construction general contractor with a 120 ... Maintenance manuals (O&Ms), attic stock, and spare parts, and evaluating information to insure ...

Turner Construction

Engineer

Charlotte, NC · On-site

Turner Construction is an industry leading commercial construction general contractor with a 120 ... Maintenance manuals (O&Ms), attic stock, and spare parts, and evaluating information to insure ...

Turner Construction

Engineer

Memphis, TN · On-site

Turner Construction is an industry-leading commercial construction general contractor with a 120 ... Maintenance manuals (O&Ms), attic stock, and spare parts, and evaluating information to insure ...

Turner Construction

Engineer

Houston, TX · On-site

Turner Construction is an industry-leading commercial construction general contractor with a 120 ... Maintenance manuals (O&Ms), attic stock, and spare parts, and evaluating information to insure ...

Turner Construction

Engineer

Houston, TX · On-site

Turner Construction is an industry-leading commercial construction general contractor with a 120 ... Maintenance manuals (O&Ms), attic stock, and spare parts, and evaluating information to insure ...

Turner Construction

Engineer

Memphis, TN · On-site

Turner Construction is an industry-leading commercial construction general contractor with a 120 ... Maintenance manuals (O&Ms), attic stock, and spare parts, and evaluating information to insure ...

Turner Construction

Engineer

Dallas, TX · On-site

Turner Construction is an industry-leading commercial construction general contractor with a 120 ... Maintenance manuals (O&Ms), attic stock, and spare parts, and evaluating information to insure ...

Turner Construction

Engineer

Monroe, LA · On-site

Turner Construction is an industry-leading commercial construction general contractor with a 120 ... Maintenance manuals (O&Ms), attic stock, and spare parts, and evaluating information to insure ...

Turner Construction

Engineer

Dallas, TX · On-site

Turner Construction is an industry-leading commercial construction general contractor with a 120 ... Maintenance manuals (O&Ms), attic stock, and spare parts, and evaluating information to insure ...

next page

Showing results 1-20

All JobsManual Turner Jobs

Manual Turner information

See salary details

$10

$41

$60

How much do manual turner jobs pay per hour?

As of Sep 10, 2026, the average hourly pay for manual turner in the United States is $41.91, according to ZipRecruiter salary data. Most workers in this role earn between $33.65 and $48.80 per hour, depending on experience, location, and employer.

What are popular job titles related to Manual Turner jobs?

For Manual Turner jobs, the most frequently searched job titles are:

Infographic showing various Manual Turner job openings in the United States as of August 2026, with employment types broken down into 1% As Needed, 81% Full Time, 15% Part Time, 2% Contract, and 1% Nights. Highlights an 96% Physical, 1% Hybrid, and 3% Remote job distribution, with an average salary of $87,173 per year, or $41.9 per hour.

Precision Machinist

New Castle, PA • On-site

Ezeflow - Flowline
See more jobs at Ezeflow - Flowlineexternal

$21.50 - $25/hr

Other

Medical, Dental, Vision, Life, Retirement, PTO

This job post has expired today. Applications are no longer accepted.

Key responsibilities

  • Set up lathes, select tooling, and verify critical dimensions to ensure parts meet tight tolerances.

  • Interpret engineering drawings and GD&T to determine machining parameters and inspect parts for compliance.

  • Operate manual and CNC lathes, manage machine settings, and troubleshoot to maintain quality and efficiency.

Job description

Ezeflow USA, Inc. – Flowline Division is seeking an experienced Manual and/or CNC Lathe Machinist to join our manufacturing team located in New Castle, PA.

The Precision Machinist role plays a key part in our production process by independently setting up machines, selecting tooling, and preforming precision inspections.

The ideal candidate will have at least 5 years of experience setting up and operating Manual or CNC Lathe machines with the ability to hold tolerances of ±0.002”.

Essential Duties and Responsibilities include the following, but are not limited to:

  • Reads blueprints or job order for specifications such as dimensions and tolerances, tooling instructions on holding devices, feed rates, cutting speeds, depth of cuts, and cutting tools
  • Positions and secures tools in holders
  • Lifts workpiece manually or with hoist, and positions and secures workpiece in holding device, machine table, chuck, centers, or fixtures
  • Sets specified rotation speed, feed rate, and depth of cut, and positions tool in relation to workpiece
  • Starts machine, turns handwheels to feed tool to workpiece, and engages feed
  • Turns valve handle to direct flow of coolant against tool and workpiece
  • Observes cutting action of machine to detect excessive wear or malfunction
  • Verifies conformance of machined workpiece to specifications
  • Scribes reference lines on workpiece to lay out interrelated surfaces, lengths, and depths of cut
  • Computes unspecified dimensions and machine settings
  • Operates forklift

**Work Schedule: **We have openings on both our 2nd shift and 3rd shift.

  • Second Shift:primarily Monday through Friday, 3:00 p.m. to 11:00 p.m.

  • **Third Shift: **primarily Sunday Night through Friday Morning, 11:00 p.m. to 7:00 a.m.

  • Opportunity to move to four (4) tens (10's) after training based upon depatmental needs

  • Overtime as needed when production needs dictate overtime is required to fulfil customer delivery expectations

Benefits:

  • **Paid Time Off: **16 hours after 60 days, annual vacation accrual
  • **Health Coverage: **Medical, Dental, Vision, Life Insurance after 60 days
  • **Additional Benefits: **Company paid short-term disability and 401(k) company contribution after 1 year

Qualifications:

  • Minimum of 5 years of Manual and/or CNC Lathe Experience
  • Ability to hold tolerances of ±0.002”
  • Ability to read and interpret Engineering Drawings & GD&T
  • Proficient in the use of precision measuring equipment
  • Ability to independently set up machines, select tooling, and perform precision inspections
  • Capable of scoring 80% or higher on our machining test

**Physical Demands: **The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to stand; use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, or crouch, and talk or hear. The employee must regularly lift and/or move up to 25 pounds; frequently lift and/or move up to 50 pounds; and occasionally lift and/or move up to 70 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and depth perception.

Must pass a urine drug screening and physical exam upon offer of employment.

Pay:$21.50 plus per hour based upon prior experience

You should be proficient in:

  • GD&T
  • Equipment Troubleshooting
  • Troubleshooting Skills
  • CNC Programming
  • Tolerance Analysis
  • Tape Measure Reading
  • CNC Machine Setup & Changeover
  • Precision Measurement & Hand Metrology
  • Advanced Inspection & Gauge Measurement
  • Precision Measurement & Inspection
  • Machine Setups for Production Runs
  • Manual Machining Skills

Machines & technologies you'll use:

  • Manual Lathe
  • CNC Lathe (2-4 axis) (Haas, Doosan, Fuji)
  • CNC Lathe (5+ axis) (Doosan)
  • Engine Lathe