ZipRecruiter

Log In

1

Machinist Inspector Jobs in Marblehead, MA (NOW HIRING)

MIT Lincoln Laboratory

Project Machinist

Lexington, MA · On-site

$24.50 - $33.50/hr

Core PCB capabilities include design for manufacturability (DFM), automated solder paste dispensers, precise pick-n-place machines, and automated optical inspection systems. Assembly, integration ...

MIT Lincoln Laboratory

Project Machinist

Lexington, MA · On-site

$24.50 - $33.50/hr

Core PCB capabilities include design for manufacturability (DFM), automated solder paste dispensers, precise pick-n-place machines, and automated optical inspection systems. Assembly, integration ...

MIT Lincoln Laboratory

Project Machinist

Lexington, MA · On-site

$24.50 - $33.50/hr

Core PCB capabilities include design for manufacturability (DFM), automated solder paste dispensers, precise pick-n-place machines, and automated optical inspection systems. Assembly, integration ...

Custom Machine LLC

Manual Machinist 1st Shift

Woburn, MA · On-site

$24 - $32.50/hr

Manual Machinist - Lathe & Mill Custom Machine LLC | 1st Shift | Full-Time Position Summary Custom ... Inspect parts using micrometers, calipers, dial indicators, height gages, bore gages, and other ...

Nova Biomedical

Machinist

Waltham, MA · On-site

$30 - $35/hr

The Machinist A will be responsible for producing high-quality parts, performing dimensional ... Ensure part quality through dimensional inspections and adherence to required specifications.

Nova Biomedical Corporation

Machinist

Waltham, MA · On-site

$30 - $35/hr

The Machinist A will be responsible for producing high-quality parts, performing dimensional ... Ensure part quality through dimensional inspections and adherence to required specifications.

Nova Biomedical

Machinist

Waltham, MA · On-site

$30 - $35/hr

The Machinist A will be responsible for producing high-quality parts, performing dimensional ... Ensure part quality through dimensional inspections and adherence to required specifications.

Boston Centerless, LLC

Quality Inspector

Woburn, MA · On-site

Near acuity and accommodation are required for reading machine dial gauges, blueprints, and precision measuring instruments used in the inspection of parts. * Normal noise levels from operating ...

Boston Centerless, LLC

Quality Inspector

Woburn, MA · On-site

$20 - $22/hr

Near acuity and accommodation are required for reading machine dial gauges, blueprints, and precision measuring instruments used in the inspection of parts. * Normal noise levels from operating ...

Boston Centerless, LLC

Quality Inspector

Woburn, MA · On-site

$20 - $22/hr

Near acuity and accommodation are required for reading machine dial gauges, blueprints, and precision measuring instruments used in the inspection of parts. * Normal noise levels from operating ...

MIT Lincoln Laboratory

Machinist A

Lexington, MA · On-site

$38.53 - $42.92/hr

Use hand tools and inspection equipment to verify work to print * Work independently and as part of a team supporting prototype builds Machines, Controls and Software Core work is CNC milling and ...

Textron

Sr CNC Machinist

Wilmington, MA · On-site

$22.50 - $30.50/hr

Inspect first articles and production parts using precision measuring equipment. Troubleshoot machining and tooling issues to improve efficiency and quality. Document production activities and ...

Rayteam Automotive

Automotive Machinist

Waltham, MA · On-site

Measure and inspect parts for accuracy. * Keep machines and work area clean and organized. Qualifications: * Mechanical aptitude and willingness to learn. * Attention to detail and reliability.

Textron

Sr CNC Machinist

Wilmington, MA

$22.50 - $30.50/hr

Inspect first articles and production parts using precision measuring equipment. Troubleshoot machining and tooling issues to improve efficiency and quality. Document production activities and ...

D&D Manufacturing

CNC Setup Machinist

Ipswich, MA

$25 - $36/hr

Machines: CNC Mills & Lathes (Haas, Mazak, Fanuc) * Experience Required: 2+ years CNC setup (job ... Perform in-process and final inspections using calipers, micrometers, height gages, and CMMs

BOSTON CENTERLESS LLC

CNC Machinist

Woburn, MA · On-site

$20 - $22/hr

Inspect finished parts using precision measuring tools (micrometers, calipers, gauges). * Troubleshoot machining issues and collaborate with engineering or maintenance teams to resolve problems.

next page

Showing results 1-20

All JobsMachinist Inspector JobsMachinist Inspector Jobs in Marblehead, MA

Machinist Inspector information

See Marblehead, MA salary details

$13

$30

$58

How much do machinist inspector jobs pay per hour?

As of Sep 6, 2026, the average hourly pay for machinist inspector in Marblehead, MA is $30.58, according to ZipRecruiter salary data. Most workers in this role earn between $20.67 and $35.19 per hour, depending on experience, location, and employer.

What is a machinist inspector?

A Machinist Inspector is a skilled professional responsible for examining and measuring machined parts to ensure they meet precise engineering specifications and quality standards. They use specialized tools and instruments such as calipers, micrometers, and gauges to verify dimensions and tolerances. Machinist Inspectors play a critical role in manufacturing by ensuring products are accurate and free from defects before they move to the next stage of production or shipment. Their work helps maintain quality control and compliance with industry regulations.

What are the key skills and qualifications needed to thrive as a machinist inspector?

To excel as a Machinist Inspector, you need strong mechanical aptitude, precision measurement skills, and experience with quality control procedures, often supported by a technical diploma or apprenticeship. Familiarity with inspection tools such as micrometers, calipers, coordinate measuring machines (CMM), and industry standards like ISO 9001 is typically required. Attention to detail, analytical thinking, and effective communication are crucial soft skills for identifying defects and coordinating with production teams. These capabilities ensure components meet strict specifications, uphold safety standards, and maintain efficient manufacturing processes.

What are some common challenges faced by machinist inspectors during quality control processes?

Machinist Inspectors often face the challenge of maintaining precision and consistency across large production runs, especially when working with tight tolerances. They must remain vigilant for subtle defects or measurement deviations and be prepared to troubleshoot root causes, which requires a thorough understanding of both machinery and quality standards. Additionally, balancing time constraints with the need for meticulous inspections can be demanding, and effective communication with machinists and engineers is essential to address and resolve any quality issues promptly.

What is the difference between Machinist Inspector vs Machinist?

AspectMachinist InspectorMachinist
CertificationsOften requires inspection certifications and technical trainingRequires machining certifications or technical training
Work EnvironmentInspection areas, quality control labs, manufacturing plantsMachine shops, manufacturing floors, industrial settings
Job FocusInspecting and verifying machined parts for quality and specificationsOperating and setting up machines to produce parts
Employer & IndustryManufacturing, aerospace, automotive industriesMachining, metalworking, manufacturing industries

The main difference between a Machinist Inspector and a Machinist is that the inspector focuses on quality control and verifying parts meet specifications, often requiring inspection certifications. In contrast, a Machinist operates and sets up machines to produce parts. Both roles are essential in manufacturing but serve different functions within the production process.

What are popular job titles related to Machinist Inspector jobs in Marblehead, MA?

For Machinist Inspector jobs in Marblehead, MA, the most frequently searched job titles are:

What cities near Marblehead, MA are hiring for Machinist Inspector jobs?

Cities near Marblehead, MA with the most Machinist Inspector job openings:

Machinist Inspector jobs near you
Infographic showing various Machinist Inspector job openings in Marblehead, MA as of August 2026, with employment types broken down into 50% Full Time, and 50% Nights. Highlights an 100% In-person job distribution, with an average salary of $63,616 per year, or $30.6 per hour.

Project Machinist

MIT Lincoln Laboratory

Lexington, MA • On-site

$23 - $31.50/hr

Full-time

Re-posted 24 days ago

Job description

Company: MIT Lincoln Laboratory
Location: Lexington, MA 02420
Job Type: Full Time
Shift: Standard hours; occasional overtime for critical program milestones
Experience: 8+ years in simultaneous 5-axis machining
Machines: 5-axis CNC machining centers
Controls: Heidenhain iTNC 530
Software: hyperMILL, SolidWorks, Microsoft Office

Why This Job Is Worth Considering

MIT Lincoln Laboratory's Fabrication Engineering Group fabricates high-complexity prototype hardware for national security programs, with sub-thousandth accuracy typical. As a Project Machinist specializing in 5-axis work, you'll own your assigned parts end to end — developing the fabrication approach, designing fixtures, programming CAM, and running the machine — while collaborating directly with program engineers on parts that are still being defined. You'll also mentor junior machinists and help shape how the group approaches its most complex work.

What You'll Be Doing

  • Program, set up, and operate 5-axis CNC equipment for high-precision prototype parts
  • Read mechanical drawings and interpret GD&T
  • Design and fabricate basic fixtures
  • Mentor and instruct junior machinists
  • Use hand tools and inspection equipment (calipers, micrometers, dial indicators) to verify work
  • Participate in manufacturability reviews and provide feedback
  • Maintain a clean, organized work area and follow safety protocols

Machines, Controls and Software

Core equipment is 5-axis CNC machining centers running a Heidenhain iTNC 530 control. CAM programming is done in hyperMILL, with SolidWorks used for 3D CAD; m&h on-machine inspection software is a plus for in-process verification.

What We're Looking ForRequired

  • 8+ years of direct experience in simultaneous 5-axis machining, including setup, CAM programming, tooling selection, and CAM simulation
  • Ability to read mechanical drawings and interpret GD&T
  • Capability to design and fabricate basic fixtures
  • Demonstrated mentoring and instructing experience with junior machinists
  • Proficiency with hand tools and inspection equipment (calipers, micrometers, dial indicators, etc.)
  • Software experience: CAM, 3D CAD, Microsoft Office (Excel, Word, Outlook)
  • Enthusiasm for learning new fabrication techniques and machine tools
  • Strong teamwork and collaboration skills
  • Confidence participating in manufacturability reviews
  • Self-motivated, with excitement for R&D work supporting prototype development
  • Maintains a clean, organized workspace and follows safety protocols
  • Ability to lift up to 50 lbs

Preferred

  • Prior experience in high-mix, low-volume job shop environments
  • Proficiency with SolidWorks CAD, hyperMILL CAM, m&h on-machine inspection software, and Heidenhain iTNC 530 controller
  • Experience machining titanium, Invar, metal matrix composites, Hastelloy, 17-4 PH, or fiber-reinforced composites
  • Familiarity with Model Based Definition and PLM software (Aras Innovator)
  • Experience with ultrasonic machining

Pay, Benefits and Schedule

Standard hours, with occasional overtime to meet critical program milestones.

About MIT Lincoln Laboratory and Apply

MIT Lincoln Laboratory is a federally funded R&D center operated by MIT, based in Lexington, MA, developing advanced technology in support of national security. This search is being run by hireCNC's Retained Search team on behalf of MIT Lincoln Laboratory — apply through Quick Apply and your resume goes straight to the recruiters working this role.

Apply