ZipRecruiter

Log In

1

Machinist Inspector Jobs in Kitchener, ON (NOW HIRING)

Aerotek

Cnc Machinist

Waterloo, ON

CA$30 - CA$45/hr

Inspect finished components to confirm they meet engineering and quality requirements, and document results as needed. * Guide and support team members in best practices for machining, setup, and ...

Aerotek

Cnc Machinist

Kitchener, ON · On-site

CA$52K - CA$64K/yr

Measure and check parts using appropriate inspection tools to verify dimensions and quality. * Interpret and work from blueprints and technical drawings to determine machining requirements. * Monitor ...

Liberty Staffing

CNC machinist

Guelph, ON

CA$31 - CA$35/hr

... inspection of machined parts to ensure part compliance. -Ability to identify, select, prepare and set cutting tools. -Machining of higher complexity parts with a wide range of different materials ...

Aerotek

Cnc Machinist

Cambridge, ON

CA$34 - CA$40/hr

Perform first-off inspections, make necessary offsets, and verify part dimensions throughout the machining process. * Work with Fanuc and Hurco controllers to operate and troubleshoot CNC equipment.

New

Acuren Inspection, Inc.

Machinist I

Cambridge, ON

CA$26 - CA$28/hr

Acuren is currently recruiting a Machinist to join our Materials Testing Laboratory team in ... inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering ...

Acuren Inspection, Inc.

Machinist I

Cambridge, ON

CA$26 - CA$28/hr

Position Summary Acuren is currently recruiting a Machinist to join our Materials Testing ... inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering ...

Aerotek

CNC Mill Machinist

Cambridge, ON

CA$24/hr

Inspect parts after milling to verify quality, dimensions, and overall conformity to specifications. * Monitor machine operation during production runs and respond promptly to any issues or ...

Gorbel

Quality Inspector

Elmira, ON · On-site

The Quality Inspector will report to the Quality Manager and work with other areas of the ... Knowledge of fabrication and machining processes, an asset. * Ability to read a tape measure.

New

CIM Metals Inc.

Be Seen First

CNC Laser Operator / Laser Cutting Machine Operator

Burlington, ON · On-site

Inspect cut quality including: * * Edge finish * Burrs * Cut accuracy * Hole quality * Part ... Perform daily machine inspections and preventative maintenance tasks * Maintain proper laser ...

CIM Metals Inc.

Be Seen First

Waterjet Operator / CNC Waterjet Machine Operator

Burlington, ON · On-site

Maintain production and inspection records * Ensure parts meet required tolerances and ... Perform daily machine checks and basic preventative maintenance * Maintain proper abrasive levels ...

ABL Employment

Machine Operator

Woodstock, ON

CA$21.15/hr

... tools and inspection methods Qualifications: - Previous machine operation or manufacturing experience preferred, but not required. - Strong attention to detail and commitment to quality ...

Amrize

Maintenance Millwright

Dundas, ON

Inspect and examine machinery and equipment to detect and investigate irregularities and malfunctions. * Adjust machinery and repair or replace defective parts; clean, lubricate and perform other ...

POWERGROUP Resources

Shop & Welder Technician

Hamilton, ON · On-site

CA$20 - CA$25/hr

Safely operate hand tools, power tools, welding equipment, and other shop machinery. * Inspect completed work to ensure quality standards are met. * Receive, inspect, and organize incoming materials ...

3PL Inc.

Be Seen First

Honing Machine Operator | Day Shift

Burlington, ON · On-site

CA$20 - CA$20.25/hr

Perform visual and dimensional inspections using calipers, gauges, and inspection fixtures ... or machine operating experience is an asset ✔ CNC, machining, lathe, milling, forklift or ...

New

3PL Inc.

Be Seen First

Honing Machine Operator | Day Shift

Burlington, ON · On-site

CA$20 - CA$20.25/hr

Perform visual and dimensional inspections using calipers, gauges, and inspection fixtures ... or machine operating experience is an asset ✔ CNC, machining, lathe, milling, forklift or ...

New

next page

Showing results 1-20

All JobsMachinist Inspector JobsMachinist Inspector Jobs in Kitchener, ON

Machinist Inspector information

What is a machinist inspector?

A Machinist Inspector is a skilled professional responsible for examining and measuring machined parts to ensure they meet precise engineering specifications and quality standards. They use specialized tools and instruments such as calipers, micrometers, and gauges to verify dimensions and tolerances. Machinist Inspectors play a critical role in manufacturing by ensuring products are accurate and free from defects before they move to the next stage of production or shipment. Their work helps maintain quality control and compliance with industry regulations.

What are the key skills and qualifications needed to thrive as a machinist inspector?

To excel as a Machinist Inspector, you need strong mechanical aptitude, precision measurement skills, and experience with quality control procedures, often supported by a technical diploma or apprenticeship. Familiarity with inspection tools such as micrometers, calipers, coordinate measuring machines (CMM), and industry standards like ISO 9001 is typically required. Attention to detail, analytical thinking, and effective communication are crucial soft skills for identifying defects and coordinating with production teams. These capabilities ensure components meet strict specifications, uphold safety standards, and maintain efficient manufacturing processes.

What are some common challenges faced by machinist inspectors during quality control processes?

Machinist Inspectors often face the challenge of maintaining precision and consistency across large production runs, especially when working with tight tolerances. They must remain vigilant for subtle defects or measurement deviations and be prepared to troubleshoot root causes, which requires a thorough understanding of both machinery and quality standards. Additionally, balancing time constraints with the need for meticulous inspections can be demanding, and effective communication with machinists and engineers is essential to address and resolve any quality issues promptly.

What is the difference between Machinist Inspector vs Machinist?

AspectMachinist InspectorMachinist
CertificationsOften requires inspection certifications and technical trainingRequires machining certifications or technical training
Work EnvironmentInspection areas, quality control labs, manufacturing plantsMachine shops, manufacturing floors, industrial settings
Job FocusInspecting and verifying machined parts for quality and specificationsOperating and setting up machines to produce parts
Employer & IndustryManufacturing, aerospace, automotive industriesMachining, metalworking, manufacturing industries

The main difference between a Machinist Inspector and a Machinist is that the inspector focuses on quality control and verifying parts meet specifications, often requiring inspection certifications. In contrast, a Machinist operates and sets up machines to produce parts. Both roles are essential in manufacturing but serve different functions within the production process.

What are popular job titles related to Machinist Inspector jobs in Kitchener, ON?

For Machinist Inspector jobs in Kitchener, ON, the most frequently searched job titles are:

What job categories do people searching Machinist Inspector jobs in Kitchener, ON look for?

The top searched job categories for Machinist Inspector jobs in Kitchener, ON are:

Machinist Inspector jobs near you
Infographic showing various Machinist Inspector job openings in Kitchener, ON as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution.

CNC Machinist/Programmer

STRIVE Recruitment

Hamilton, ON

$30 - $35/hr

Full-time

Medical, Dental, Vision

Posted 9 days ago

Job description

CNC PROGRAMMER/MACHINIST

PERMANENT

Hamilton, ON

$30–$35/HR


ABOUT US

STRIVE is a specialist recruitment firm offering proactive recruitment solutions in the areas of Accounting & Finance, Corporate Administration, and Manufacturing Operations. STRIVE supports various clients from small to medium-sized enterprises to Fortune 500 organizations for their permanent, contract, and temporary recruitment needs. Our human recruiters review all applications and always make the final hiring decision. On occasion, we also use AI-assisted tools to help review applications.


THE ROLE

STRIVE is working with a well-established manufacturing organization seeking an Experienced CNC Programmer/Machinist to join their team.

You will be responsible for programming, setting up, and operating CNC machines while ensuring components are produced accurately and within required tolerances. This is a hands-on production shop environment supporting the manufacturing of medium- to heavy-duty conveyor components for the bulk material handling industry. The ideal candidate is an experienced machinist with strong attention to detail who is comfortable working with CNC and conventional equipment.


ADVANTAGES

  • Competitive hourly wage of $30–$35/hr
  • Straight day shift with a consistent schedule
  • Full-time permanent opportunity with a well-established organization
  • Accessible by public transit/bus route
  • Comprehensive benefits package including dental, extended health, and vision care
  • RRSP matching to support your long-term financial goals
  • Family-oriented work environment
  • Stable, long-term employment opportunity
  • Opportunity to work with a variety of CNC and conventional machinery
  • Work in a hands-on and team-oriented manufacturing environment
  • Opportunity to grow your skills within a specialized manufacturing operation


RESPONSIBILITIES

  • Program, set up, and operate CNC machines
  • Work with FANUC and MAPPS controllers
  • Operate conventional mills and lathes
  • Read and interpret technical drawings, specifications, and machining requirements
  • Use precision measuring tools to verify dimensions and tolerances
  • Inspect finished parts to ensure quality standards are met
  • Ensure dimensions remain within required tolerances
  • Perform machine inspections and basic maintenance as required
  • Safely lift and handle large parts and stock materials
  • Coordinate with other operators and departments to maintain an efficient workflow
  • Meet production timelines while maintaining quality and accuracy
  • Maintain a clean, safe, and organized work environment
  • Follow all company safety policies and procedures


REQUIREMENTS

  • 3–5+ years of CNC machining experience
  • Experience with CNC programming, setup, and operation
  • Experience programming using FANUC controllers
  • Experience with MAPPS controllers
  • Experience with Mori Seiki and  Doosan and Nakamura-Tome equipment is an asset
  • Ability to operate conventional mills and lathes
  • Strong understanding of machining tolerances and quality requirements
  • Ability to use common precision measuring tools
  • Ability to safely handle large parts and materials
  • Strong attention to detail and commitment to quality
  • Ability to work independently and as part of a team
  • Safety-focused with a strong understanding of shop safety


#INDSTRIVEON

#LI-SR