ZipRecruiter

Log In

1

Machine Shop Jobs in Wayne, NJ (NOW HIRING)

Marotta Controls, Inc.

CNC Machinist IV - Turning

Montville, NJ · On-site

$34 - $40/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

The incumbent must be an individual who can multi-task and perform various machine shop related activities which are to be conducted in a manner that complies with company requirements (i.e ...

Alan Baird Industries

Machinist

Allendale, NJ · On-site

$30 - $33/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Assists with tasks in the machine shop and production areas as needed. * Performs machining work according to required drawings or supervisor's instructions * Performs maintenance and machine ...

Alan Baird Industries

Machinist

Allendale, NJ · On-site

$30 - $33/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Assists with tasks in the machine shop and production areas as needed. * Performs machining work according to required drawings or supervisor's instructions * Performs maintenance and machine ...

Alan Baird Industries, Inc

Machinist

Allendale, NJ · On-site

$30 - $33/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Assists with tasks in the machine shop and production areas as needed. * Performs machining work according to required drawings or supervisor's instructions * Performs maintenance and machine ...

McWilliams Forge

2nd Shift Supervisor

Rockaway, NJ

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Machine Shop and Heat Treat Responsibilities * Oversee all CNC machining, die maintenance and re-sink, grinding, and daily Heat Treat operations to ensure compliance with process specifications and ...

McWilliams Forge

3rd Shift Supervisor

Rockaway, NJ

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Machine Shop and Heat Treat Responsibilities * Oversee all CNC machining, die maintenance and re-sink, grinding, and daily Heat Treat operations to ensure compliance with process specifications and ...

Hansome Energy Systems

Machinist

North Arlington, NJ

$22.25 - $30.50/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Machine shop experience working with mills and lathes * Ability and experience reading detailed prints * Ability to use high-precision inspection and measurement instruments EDUCATION * High-School ...

previous pagenext page

Showing results 21-40

All JobsMachine Shop JobsMachine Shop Jobs in Wayne, NJ

Machine Shop information

See Wayne, NJ salary details

$10

$18

$23

How much do machine shop jobs pay per hour?

As of Aug 18, 2026, the average hourly pay for machine shop in Wayne, NJ is $18.05, according to ZipRecruiter salary data. Most workers in this role earn between $14.33 and $18.12 per hour, depending on experience, location, and employer.

What is a machine shop?

A machine shop job involves operating, maintaining, and programming machines such as lathes, milling machines, and grinders to manufacture metal or plastic parts. Workers in a machine shop may have roles like machinist, CNC operator, or tool and die maker. They follow blueprints and technical drawings to create precise components for industries like aerospace, automotive, and manufacturing. Strong attention to detail, mechanical skills, and knowledge of machining processes are essential for success in this role.

What does a typical day look like working in a machine shop?

A typical day in a machine shop involves setting up and operating various machines to manufacture or modify metal parts according to precise specifications. You'll often read blueprints or instructions, measure dimensions with specialized tools, and perform quality control checks on finished products. Collaboration with engineers, supervisors, and fellow machinists is common to troubleshoot issues and maintain smooth production. Safety is a top priority, and you may be responsible for maintaining equipment and keeping your workspace organized. The work is often hands-on and requires a focus on accuracy and efficiency throughout the shift.

What are the key skills and qualifications needed to thrive in the machine shop position, and why are they important?

To thrive in a Machine Shop, you need strong mechanical aptitude, proficiency in operating machining equipment (such as lathes, milling machines, and grinders), and a solid understanding of safety protocols; a high school diploma or equivalent is typically required, with additional technical certifications being highly beneficial. Familiarity with CNC programming, blueprint reading, precision measurement tools, and shop management software is often sought after. Attention to detail, problem-solving skills, teamwork, and effective communication set standout candidates apart. These skills are essential to ensure high-quality production, prevent safety incidents, and maintain efficient workflow in a demanding manufacturing environment.

Do machine shop machinists make a lot of money?

Machine shop machinists typically earn wages that vary by experience, location, and industry, with median salaries often ranging from $40,000 to $60,000 annually. Skilled machinists who operate CNC machines or hold certifications can earn higher wages, especially in specialized or high-demand environments.

What are the most commonly searched types of Machine Shop jobs in Wayne, NJ?

The most popular types of Machine Shop jobs in Wayne, NJ are:

What job categories do people searching Machine Shop jobs in Wayne, NJ look for?

The top searched job categories for Machine Shop jobs in Wayne, NJ are:

What cities near Wayne, NJ are hiring for Machine Shop jobs?

Cities near Wayne, NJ with the most Machine Shop job openings:

Machine Shop jobs near you
Infographic showing various Machine Shop job openings in Wayne, NJ as of August 2026, with employment types broken down into 96% Full Time, and 4% Contract. Highlights an 96% In-person, and 4% Remote job distribution, with an average salary of $37,544 per year, or $18.1 per hour.

CNC Machinist IV - Turning

Marotta Controls, Inc.

Montville, NJ • On-site

$34 - $40/hr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 27 days ago

Job description

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today!
CNC Machinist IV - Turning
Overview
This position's primary responsibility is to set-up and operate a variety of CNC Turning Centers including but not limited to: single and dual spindle, single and dual turret, Swiss type, gang tool, and conversational control machines to produce accurate, high quality - tight tolerance products in a safe, effective/efficient manner to meet operational requirements. The candidate's expertise will be applied in a proactive manner utilizing best practices when conducting documentation review, troubleshooting, continuous improvement, equipment set-up/operation and component inspection related activities. At a Tech IV level the position requires the ability to independently troubleshoot, set-up, run, inspect, and improve operations within the work center.
The incumbent must be an individual who can multi-task and perform various machine shop related activities which are to be conducted in a manner that complies with company requirements (i.e., regulatory, safety, administrative, etc.). This position requires effective interaction with a broad spectrum of people within the organization to successfully support operations and the corporate strategic vision.
SKILLS/EXPERIENCE:
  • 7+ years of related experience involving set-up and operation of precision CNC Turning Centers in an effective, efficient, safe and consistent manner (Aerospace mfg. environment preferred).
  • High School/(GED) Diploma or Vocational/Technical school equivalent
  • Self-motivated individual who possesses the ability to analyze, organize, plan, multi-task and achieve results through effective interaction with others.
  • Possess math skills required to effectively and efficiently read, interpret documents (i.e., blueprints/technical drawings, operation/tool/set-up sheets, procedures, ECN's, routers, etc.).
  • Demonstrate effective verbal/written communication skills required for interacting with all levels of personnel within the organization.
  • Knowledgeable in GT&D practices, inspection methods, effective utilization of measuring equipment/instruments, root cause investigations, troubleshooting, and performance metrics.
  • Consistently demonstrate commitment to company values, strategic plan and vision
  • Must demonstrate creative thinking as it relates to machine shop processes.
  • Must be a US Citizen

Additional Duties / Responsibilities:
  • Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required).
  • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to all regulatory and internal system requirements.
  • Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization
  • Actively participate in team meetings, improvement initiatives/programs, etc. and support actions to drive company initiatives/goals
  • Assist in the training of personnel to perform required technical tasks (as directed)
  • Consistently demonstrate commitment to company values
  • Keep management informed of area activities and of any significant problems.
  • Assume responsibility for related duties as required or assigned.
  • Ensure that work area is clean, secure, and well maintained.
  • Complete special projects and miscellaneous assignments as required.

Work Environment:
  • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration
  • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required).
  • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc.
  • Overtime and weekend work may be required, as job duties demand.
  • No travel is expected for this position

Physical Requirements:
  • While performing the duties of this job, the employee is regularly required to talk and hear.
  • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel
  • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
  • The employee is regularly required to stand at length (7-8 hours, daily), sit, walk, stoop, bend, turn, balance, and/or crouch, and move about the facility.
  • The employee may be required to lift and/or move items weighing up to 40 pounds, and occasionally up to 70 lbs.

This position is at our Montville, NJ corporate offices location.
Pay Range: $34-$40/hour + shift differential
Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts.
At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed.
Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency.
Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture.
If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at www.marotta.com to learn more about us and to apply. Check out all of our openings at https://marotta.com/job-openings/
VETERANS ARE ENCOURAGED TO APPLY
No agencies, please.
Pay Range: $29 - $40 per hour

Apply