1

Level Two Rigger Jobs in Richmond, VA (NOW HIRING)

Rigger

Chester, VA

$22 - $28.50/hr

Trained to safely operate forklifts, JLG type man-lifts, scissor-lifts and similar equipment. 2. ... The noise level in the work environment is usually loud. CSE offers competitive wages, vacation ...

Millwright

Petersburg, VA

$24.75 - $32.50/hr

Strong welding, fabrication, rigging, and alignment capabilities with the ability to lead complex repairs. B-Level Millwright * Two to four years of industrial mechanical maintenance experience.

Millwright

Petersburg, VA · On-site

$24.75 - $32.50/hr

Strong welding, fabrication, rigging, and alignment capabilities with the ability to lead complex repairs. B-Level Millwright * Two to four years of industrial mechanical maintenance experience.

Be Seen First

Steel Fitter

Powhatan, VA · On-site

$18 - $23/hr

... level, and fit together heavy metal sections, plates, angle irons, and I-beams. * Operate rigging ... Minimum 2+ years of layout and fitting experience in a heavy steel manufacturing or fabrication ...

Industrial Mechanic

Richmond, VA · On-site

$22.50 - $29.50/hr

... level. The requirements listed below are representative of the knowledge, skill, and/or ability ... Perform rigging and lifting of heavy equipment in compliance with all safety requirements * Wire ...

Central Maintenance Electrician

Petersburg, VA · On-site

$27.50 - $35.25/hr

Ability to work a rotating 12 hr shift, days, nights, and two weekends a month (Dupont 4/3 schedule ... Experience with pumps, hydraulic systems, pneumatic systems, stick and tig welding and rigging ...

Central Maintenance Electrician

Petersburg, VA · On-site

$27.50 - $35.25/hr

Ability to work a rotating 12 hr shift, days, nights, and two weekends a month (Dupont 4/3 schedule ... Experience with pumps, hydraulic systems, pneumatic systems, stick and tig welding and rigging ...

... the plant · Rigging and lifting equipment as needed · Supporting job plan and shop paper ... level electrician or successful completion of state certified apprenticeship program in utility ...

... the plant · Rigging and lifting equipment as needed · Supporting job plan and shop paper ... level electrician or successful completion of state certified apprenticeship program in utility ...

High School Diploma or GED Two years of experience at the Equipment Operator level and successfully ... rigging systems and hoisting mechanisms, including winches and grip hoists, as well as their ...

next page

Showing results 1-20

Level Two Rigger information

See Richmond, VA salary details

$14

$25

$36

How much do level two rigger jobs pay per hour?

As of Jul 27, 2026, the average hourly pay for level two rigger in Richmond, VA is $25.75, according to ZipRecruiter salary data. Most workers in this role earn between $22.84 and $29.52 per hour, depending on experience, location, and employer.

What is the difference between Level Two Rigger vs Level One Rigger?

AspectLevel Two RiggerLevel One Rigger
CertificationsTypically requires basic rigging certifications and experienceEntry-level, often requires basic rigging training
Work EnvironmentPerforms more complex rigging tasks in construction, industrial, or entertainment settingsHandles basic rigging tasks, often under supervision
ResponsibilitiesSets up and inspects rigging for complex lifts, ensures safety complianceAssists with rigging setup, performs routine inspections

Level Two Riggers have more advanced skills, certifications, and responsibilities compared to Level One Riggers. They handle complex rigging tasks, perform detailed inspections, and work independently in demanding environments. Level One Riggers typically perform basic tasks under supervision and require less experience. The progression from Level One to Level Two involves gaining experience, certifications, and technical knowledge to ensure safety and efficiency in rigging operations.

What is the highest paying rigger job?

The highest paying rigger jobs are often in specialized industries such as oil and gas, aerospace, or heavy construction, where riggers with advanced certifications and extensive experience can earn higher wages. Lead riggers or those working in remote or hazardous environments typically command the highest salaries due to increased responsibilities and risks.

What is a rigger 2 job description?

A Level Two Rigger is responsible for installing, inspecting, and maintaining rigging equipment used to lift and move heavy loads safely. They interpret technical drawings, select appropriate rigging gear, and ensure compliance with safety standards, often working with cranes and hoists. Certification and experience in rigging techniques are typically required for this role.

How much do level 3 riggers make?

Level 3 riggers typically earn higher wages than Level 2 riggers due to increased experience and responsibilities. In general, they can make between $25 and $40 per hour, depending on the industry, location, and certifications held. Advanced skills in crane operation and safety protocols are often required for higher pay levels.

What jobs pay 4000 a week without a degree?

A Level Two Rigger can potentially earn around $4,000 per week with experience, specialized skills, and working in high-paying industries such as construction, entertainment, or offshore oil. These roles often require certifications, physical fitness, and the ability to work in challenging environments, but they typically do not require a college degree. Earnings depend on location, project complexity, and hours worked.
What job categories do people searching Level Two Rigger jobs in Richmond, VA look for? The top searched job categories for Level Two Rigger jobs in Richmond, VA are:
What cities near Richmond, VA are hiring for Level Two Rigger jobs? Cities near Richmond, VA with the most Level Two Rigger job openings:

$22 - $28.50/hr

Full-time

Posted 16 days ago


Job description

Summary: Assembles rigging to lift and move equipment or material in manufacturing plant, shipyard, or on construction project by performing the following duties.

Essential Duties and Responsibilities include the following. Other duties may be assigned.

1.Has practical knowledge of Regulatory Compliance with local, state, and federal Occupational Safety and Health Administration (OSHA) and Department of Transportation (DOT) rules and regulations, CSE, Inc. Rules and Regulations and Site-Specific Rules and Regulations.

a.Works within AISC Certification Procedures.

b.Familiar with and enforces strict compliance with all QA/QC and Safety procedures.

c.Trained to safely operate forklifts, JLG type man-lifts, scissor-lifts and similar equipment.

2.Assumes responsibility of organizing, planning and prioritizing rigging work

a.Familiar with supervisory personnel, job activity to be performed, hazard communication program, safety rules and regulations, and emergency action procedures.

b.Maintains contact with supervisor to receive instructions.

c.Aligns, levels, and anchors machinery; Attaches loads to rigging to provide support or prepare them for moving, using hand and power tools. Attaches pulleys and blocks to fixed overhead structures such as beams, ceilings, and gin pole booms, using bolts and clamps.

d.Controls movement of heavy equipment through narrow openings or confined spaces, using chain falls, gin poles, gallows frames, and other equipment.

e.Dismantles and stores rigging equipment after use.

f.Fabricates and sets up repair rigging, supporting structures, hoists, and pulling gear, using hand and power tools. Manipulates rigging lines, hoists, and pulling gear to move or support materials such as heavy equipment, ships, or theatrical sets.

g.Selects gear such as cables, pulleys, and winches, according to load weights and sizes, facilities, and work schedules.

h.Signals or verbally direct workers engaged in hoisting and moving loads, in order to ensure safety of workers and materials.

i.Tests rigging to ensure safety and reliability.

j.Tilts, dips, and turns suspended loads to maneuver over, under, and/or around obstacles, using multi-point suspension techniques.

k.Installs ground rigging for yarding lines, attaching chokers to logs and then to the lines.

Supervisory Responsibilities: This job has no supervisory responsibilities.

Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience: Preferred one to two years related experience and/or training.

Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence.

Mathematical Skills: Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance.

Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Certificates, Licenses, Registrations: Valid driver's license. Must meet all CSE MVR criteria.

Other Qualifications Must be able to travel. Must be able to pass a pre-employment drug screen.

Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 50 pounds, frequently lift and/or move up to 100 pounds and occasionally lift and/or move more than 100 pounds.

Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles and outside weather conditions. The employee is occasionally exposed to vibration. The noise level in the work environment is usually loud.

CSE offers competitive wages, vacation/personal time, medical, dental, vision, and other competitive benefits, including a 401k plan.

INTENT AND FUNCTION OF JOB DESCRIPTIONS

Job descriptions assist organizations in ensuring that the hiring process is fairly administered and that qualified employees are selected. They are also essential to an effective appraisal system and related promotion, transfer, layoff, and termination decisions. Well-constructed job descriptions are an integral part of any effective compensation system.

All descriptions have been reviewed to ensure that only essential functions and basic duties have been included. Peripheral tasks, only incidentally related to each position, have been excluded. Requirements, skills, and abilities included have been determined to be the minimal standards required to successfully perform the positions. In no instance, however, should the duties, responsibilities, and requirements delineated be interpreted as all inclusive. Additional functions and requirements may be assigned by supervisors as deemed appropriate.

In accordance with the Americans with Disabilities Act, it is possible that requirements may be modified to reasonably accommodate disabled individuals. However, no accommodations will be made which may pose serious health or safety risks to the employee or others or which impose undue hardships on the organization.

Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law.