ZipRecruiter

Log In

1

Intern Aircraft Technical Publication Jobs (NOW HIRING)

Pae

LUH Aircraft Mechanic III/Lead

New Windsor, NY

$28.75 - $37.75/hr

Uses a working knowledge of technical publications and the Government STAMIS to make entries in aircraft logs and records. Receives technical assistance, as required, from higher-level technician.

Amentum

LUH Aircraft Mechanic III/Lead

Windsor, NY · On-site

$28 - $37/hr

Uses a working knowledge of technical publications and the Government STAMIS to make entries in aircraft logs and records. Receives technical assistance, as required, from higher-level technician.

Pae

LUH72 Aircraft Mechanic 2 - A&P

Fort Polk, LA · On-site

$26.25 - $34.25/hr

The LUH72 Aircraft Mechanic II performs the full range of military tactical aircraft maintenance ... Requires working knowledge of technical publications. * The incumbent receives technical guidance ...

Pae

LUH72 Aircraft Mechanic 2 (A&P)

Fort Polk, LA

$26.25 - $34.25/hr

The LUH72 Aircraft Mechanic II performs the full range of military tactical aircraft maintenance ... Requires working knowledge of technical publications. * The incumbent receives technical guidance ...

Amentum

LUH72 Aircraft Mechanic 2 - A&P

Fort Polk, LA · On-site

$26.25 - $34.25/hr

The LUH72 Aircraft Mechanic II performs the full range of military tactical aircraft maintenance ... Requires working knowledge of technical publications. * The incumbent receives technical guidance ...

Amentum

LUH72 Aircraft Mechanic 2 (A&P)

Fort Polk, LA · On-site

$26.25 - $34.25/hr

The LUH72 Aircraft Mechanic II performs the full range of military tactical aircraft maintenance ... Requires working knowledge of technical publications. * The incumbent receives technical guidance ...

PlanIT Group, LLC

Technical Editor / Writer

... friendly publications. Responsibilities : • Research, write, and edit technical content for F-16 aircraft maintenance and operations manuals in compliance with contractual and military ...

L3HHCM20

Aircraft Maintenance C - A&P Mechanic

Tucson, AZ

$27.50 - $36.25/hr

In-depth knowledge of aircraft technical orders/job guides/publications-read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. * Working knowledge ...

AerSale, Inc.

Technical Records Clerk

Miami, FL · On-site

Maintain the technical publication library. • Must have an in-depth working knowledge of the format and procedures as related to aviation maintenance, aircraft manuals, related material ...

previous pagenext page

Showing results 21-40

All JobsIntern Aircraft Technical Publication Jobs

Intern Aircraft Technical Publication information

See salary details

$9

$17

$25

How much do intern aircraft technical publication jobs pay per hour?

As of Aug 16, 2026, the average hourly pay for intern aircraft technical publication in the United States is $17.44, according to ZipRecruiter salary data. Most workers in this role earn between $14.42 and $19.23 per hour, depending on experience, location, and employer.

What are the most commonly searched types of Aircraft Technical Publication jobs?

The most popular types of Aircraft Technical Publication jobs are:

Intern Aircraft Technical Publication jobs near you
Infographic showing various Intern Aircraft Technical Publication job openings in the United States as of August 2026, with employment types broken down into 1% As Needed, 89% Full Time, 6% Part Time, and 4% Contract. Highlights an 90% Physical, 3% Hybrid, and 7% Remote job distribution, with an average salary of $36,265 per year, or $17.4 per hour.

Parachute Mechanical Systems Engineer 2

Cirrus Aircraft

Duluth, MN • On-site

$81K/yr

Full-time

Medical, Dental, Vision, Retirement, PTO

Re-posted 25 days ago

Cirrus Aircraft rating

8.5

Company rating: 8.5 out of 10

Based on 54 frontline employees who took The Breakroom Quiz

27th of 72 rated aerospace companies

Job description

Overview
Cirrus Aircraft is currently hiring an Aircraft Systems Engineer focused on Mechanical and Parachute Systems. An engineer in this role is responsible for design, development, integration, and certification with systems such as wheels, brakes, tires, landing gear, complex mechanisms and textiles along with structural strength of these systems on both the SR and SF platforms as well as new projects. Candidates will also be responsible for coordinating and leading development and system integration work with subcontractors and external suppliers.
Responsibilities
Technical areas of responsibility include:
  • Requirements, Design, Traceability, and Installation of on-aircraft equipment working with multi-disciplinary team.
  • Ensure system requirements comply with Part 23, ASTMs, and other regulatory, industry requirements, or MIL standards.
  • Complete project assignments and takes responsibility for designs and design outcomes.
  • Integration Test definition (requirements-based testing), execution, and troubleshooting both for on aircraft and bench level testing. Validating performance and supporting certification.
  • Interface and collaborate with various aircraft disciplines (structural, electrical, flight-test, etc.) on both current and new Cirrus Aircraft platforms.
  • Perform system analysis and modeling such as: Thermal/Heat Transfer Analysis, Flow/Pressure Drop Analysis, Component Sizing Analysis (Fan, Pump, Heat Exchanger, Valves), and Control System Architecture & Analysis.
  • Perform trade studies involving weight, cost, reliability, and manufacturability.
  • Active involvement in development and certification of aircraft systems under FAR Part 23 or Part 25.
  • Research industry guidance documents for best practices, e.g. SAE.
  • Support technical publications by providing source data and reviewing publications such as: system operating manuals, maintenance manuals, instructions for continued airworthiness
  • Support periodic travel for Technical Interchange Meetings, Program Reviews, Testing, and Aircraft Field Support.
  • Interpret and use aircraft technical documentation such as: system schematics, mechanical drawings, electrical drawings, aircraft technical publications, Standards (14CFR, MIL, SAE, ASTM, RTCA, etc.)
  • Participates in personal and department's continuous improvement activities.
  • Anticipates projects tasks. Provides guidance and task to junior engineers.

Qualifications
Required Education and Experience:
  • Bachelor's degree in Mechanical Engineering or Aerospace Engineering.
  • 3 or more years' experience
  • Proficiency in PLM and CAD software
  • Strong understanding of top-down modeling principles and practices
  • Proficiency in geometric dimensioning and tolerance
  • Ability to work effectively with others in a cross functional organization
  • Strong verbal and written communication skills
  • Effective interpersonal skills
Distinguishing Skills and Experience:
  • Experience with Windchill PDM and Creo/Pro-E.
  • Experience in system validation & verification, including assembling validation, writing system test procedure, conducting integration testing, troubleshooting problem reports.
  • Familiarity with environmental testing
Demonstrated Proficiencies/Skills/Abilities:
  • Must be able to demonstrate the ability to read, write and speak the English language
  • Ability to work both independently and within a cross-functional team
  • Demonstrated ability to work cross-functionally with Chief Engineers and management peer groups.
  • Out of the box thinking to deliver required technical solutions to meet program goals.
  • Excellent technical writing, presentation, and interpersonal communication skills.
  • Sound judgement and decision-making skills.
  • Able to work with program managers and project leaders to develop and hold accountability to schedules.
  • Ability to efficiently learn new skills and manage multiple tasks
  • Proficient with Microsoft Office (Outlook, Excel, PowerPoint, Word, Visio, Project)

Our Benefits: Cirrus provides a range of exciting benefits, including:
  • Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options
  • Employer-Paid Coverages: Group term life, short- and long-term disability insurance
  • Flexible Spending Accounts: FSA and HSA offerings with company contributions to HSA
  • Well-being: Calm Health, Employee Assistance Program, and wellness incentives through medical provider
  • 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting at 1 year of service
  • PTO: Various PTO plans starting at 100 hours accrued within the first year
  • Additional Time off Benefits: Paid holidays, 2 weeks of Paid Parental leave, paid time for funeral leave and jury duty
  • Career Development: Tuition reimbursement program and professional growth opportunities
  • Exclusive Discounts: Cirrus Store, partner and marketplace discounts available
  • Community & Engagement: Company and employee clubs at various locations

These benefits are designed to support your well-being, growth, and enjoyment at Cirrus!
Pay Range
Salary Range: USD $81,952.16/Yr. - USD $122,928.23/Yr.

What Cirrus Aircraft employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply