ZipRecruiter

Log In

1

Insulation Quality Control Inspector Jobs in Rochester, NY

Oetiker

Quality Inspector

Batavia, NY · On-site

$40K - $59K/yr

Support to Quality, Production, PPE, & Maintenance Teams * Uses inspection tooling (i.e.: calipers ... Gage maintenance, control, & calibration (MSA) * Process Capability Studies * Develops master ...

ADDMAN ENGINEERING

Quality Inspector

Ontario, NY

The Quality Inspector acts as a verification of molded parts to a pre-determined quality plan ... Understand and interpret SPC Data, including control limits and charts * Utilize six-sigma quality ...

Oetiker

Quality Inspector

Batavia, NY

$40K - $59K/yr

Support to Quality, Production, PPE, & Maintenance Teams * Uses inspection tooling (i.e.: calipers ... Gage maintenance, control, & calibration (MSA) * Process Capability Studies * Develops master ...

Addman Engineering LLC

Quality Inspector

Ontario, NY

The Quality Inspector acts as a verification of molded parts to a pre-determined quality plan ... Understand and interpret SPC Data, including control limits and charts * Utilize six-sigma quality ...

ADDMAN Engineering LLC

Quality Inspector

Ontario, NY · On-site

The Quality Inspector acts as a verification of molded parts to a pre-determined quality plan ... Understand and interpret SPC Data, including control limits and charts * Utilize six-sigma quality ...

Addman Engineering

Quality Inspector

Ontario, NY · On-site

The Quality Inspector acts as a verification of molded parts to a pre-determined quality plan ... Understand and interpret SPC Data, including control limits and charts * Utilize six-sigma quality ...

Oetiker

Quality Inspector

Batavia, NY

$40K - $59K/yr

Support to Quality, Production, PPE, & Maintenance Teams * Uses inspection tooling (i.e.: calipers ... Gage maintenance, control, & calibration (MSA) * Process Capability Studies * Develops master ...

Connect with Oetiker

Quality Inspector

Batavia, NY

Support to Quality, Production, PPE, & Maintenance Teams * Uses inspection tooling (i.e.: calipers ... Gage maintenance, control, & calibration (MSA) * Process Capability Studies * Develops master ...

Mcalpin Industries Inc

Inspector 1

Macedon, NY · On-site

Understands and follows all quality procedures. * May require supervision to help determine the ... May inspect and sort during manufacturing process (in-process sorts). * Performs final inspection ...

Graham Corporation

Quality Technician

Batavia, NY · On-site

$18.50 - $24/hr

Quality Control Supervisor FLSA Status & EEO Code: Non-Exempt & Division/Department: GHM/Quality ... Knowledge of proper inspection techniques required to obtain accurate results. * Perform ...

Graham Manufacturing

Quality Technician

Batavia, NY · On-site

$18.50 - $24/hr

Quality Control Supervisor FLSA Status & EEO Code: Non-Exempt & Division/Department: GHM/Quality ... Knowledge of proper inspection techniques required to obtain accurate results. * Perform ...

next page

Showing results 1-20

All JobsInsulation Quality Control Inspector JobsInsulation Quality Control Inspector Jobs in Rochester, NY

Insulation Quality Control Inspector information

See Rochester, NY salary details

$11

$21

$32

How much do insulation quality control inspector jobs pay per hour?

As of Jun 20, 2026, the average hourly pay for insulation quality control inspector in Rochester, NY is $21.19, according to ZipRecruiter salary data. Most workers in this role earn between $17.07 and $23.70 per hour, depending on experience, location, and employer.

What type of inspectors make the most money?

In the field of insulation quality control, senior inspectors with extensive experience, specialized certifications, or supervisory roles tend to earn higher salaries. Inspectors working in high-demand regions or those with expertise in advanced insulation materials and techniques generally have higher earning potential.

How much do quality control inspectors make in the US?

Quality control inspectors, including those inspecting insulation, typically earn a median annual salary of around $40,000 to $50,000 in the US. Experienced inspectors with certifications and specialized skills can earn higher wages, often exceeding $60,000 annually. Salaries vary based on location, experience, and industry demand.

How to become an insulation inspector?

To become an insulation quality control inspector, you typically need a high school diploma or equivalent, followed by specialized training in insulation materials and installation standards. Many inspectors obtain certification from organizations like the National Institute for Certification in Engineering Technologies (NICET) or state licensing, and gaining experience through on-the-job training is common. Knowledge of building codes, safety procedures, and inspection tools is essential for this role.

Is a QC inspector job stressful?

A Quality Control Inspector in insulation typically works in a structured environment, focusing on inspecting materials and ensuring standards are met. The job can involve physical activity and attention to detail, but it generally does not involve high stress levels if workload and safety protocols are managed properly.
What are popular job titles related to Insulation Quality Control Inspector jobs in Rochester, NY? For Insulation Quality Control Inspector jobs in Rochester, NY, the most frequently searched job titles are:
What job categories do people searching Insulation Quality Control Inspector jobs in Rochester, NY look for? The top searched job categories for Insulation Quality Control Inspector jobs in Rochester, NY are:
What cities near Rochester, NY are hiring for Insulation Quality Control Inspector jobs? Cities near Rochester, NY with the most Insulation Quality Control Inspector job openings:
Insulation Quality Control Inspector jobs near you

Quality Inspector

Oetiker

Batavia, NY • On-site

$40K - $59K/yr

Full-time

Medical, Dental, Vision, Retirement, PTO

Posted 21 days ago

Job description

Company Description
Being part of 'Team Oetiker' means working with over 2,000 people in 32 countries and at 13 production sites. We are the leading provider of high-end interconnect solutions for automotive and industrial applications. Our clamps, rings, straps and quick connectors can be found on virtually every vehicle in the world and in millions of household appliances. We are a Swiss family-owned company with a long-term perspective and a focus on sustainable business success. Does this sound like a place you want to work? Then get in touch with us!
Job Description
Salary Range: $40,000 - $59,000
Inspects incoming raw materials while utilizing sampling plan, approved engineering prints, and various instruments and software within inspection/metrology lab.
  • Verifies specified dimensions of product or material (incoming & in-process inspections)
  • First piece inspections & reporting
  • Customer and supplier PPAP dimensional layouts
  • Examines defective parts to determine cause of defect
  • Inspects to all print specifications and conformance
  • Maintains records regarding inspection and testing results
  • Assists in Dock Audits / Process Audits
  • Supports zero defect culture (Quality, HSE)
  • Support to Quality, Production, PPE, & Maintenance Teams
  • Uses inspection tooling (i.e.: calipers, scales, optical comparator, micrometers, plug gages, microscope, thread gages, etc.).
  • CMM Programming/operation
  • Gage maintenance, control, & calibration (MSA)
  • Process Capability Studies
  • Develops master bubble, inspection plans, ensure revision control
  • Ensures effective product containment activities when required
  • Organizes on-site sorting activities when required (internal / 3rd party)
  • Assists in GP 12 / Safe Launch Activities
  • Supports to ensure compliance to IATF-16949 & ISO 14001 / 45001

Qualifications
Knowledge, Skills, Abilities
  • Blueprints, GD&T, metrology background/experience is required
  • PPAP, GP-12 / Safe Launch
  • Strong attention to detail
  • Strong ability to adapt to change
  • Knowledge of calendar, email, internet, and spreadsheet software
  • Solid works, and Microsoft Access

Education / Experience
  • High School Diploma or GED
  • 3-5 years quality inspection experience required
  • 3-5 years similar manufacturing industry experience preferred

Additional Information
What We Offer:
  • Competitive compensation packages
  • Paid Time Off (starts at 17 days a year)
  • Medical, Dental, Vision
  • Generous 401k match
  • Education tuition reimbursement program
  • Opportunities for Advancement
  • Comprehensive Training Program and access to Online Learning

Hours:
  • This is a full-time position with hours starting at 8:00am and ending at 4:30pm, M-F (40 hours/week).

Videos To Watch
https://www.youtube.com/watch?v=Ld-ZugETyvw

Apply