ZipRecruiter

Log In

1

Instrumentation Control Jobs in Kitchener, ON (NOW HIRING)

Air Liquide

Maintenance & Instrumentation

Hamilton, ON

CA$49.09/hr

Provides Instrumentation & Control support consisting of troubleshooting and repairing or replacing all types of Instruments in an Air Separation Unit and Steam Methane Reformer as well as peripheral ...

New

Air Liquide

Instrumentation Specialist

Hamilton, ON

CA$105K - CA$115K/yr

Assists in the development of control strategies and narratives for implementation. Specifies ... Instrumentation, Analytical equipment, control systems, PLC, DCS, telemetry, HMI's. * Bilingual ...

New

CIMA+

Instrumentation & Controls Engineer

Guelph, ON · Hybrid

Design control system schematics such as installation details, loop diagrams, connection and ... Specification of instrumentation and selection of the correct technology based upon project needs ...

GHD

Design Manager - Water/Wastewater

Waterloo, ON · On-site

... instrumentation & control) considered an asset * Knowledge of scheduling software and engineering and capital cost estimating techniques is a definite asset. * Experience with Building Information ...

DefineHR Inc

Control Systems Integrator

Hamilton, ON

CA$35 - CA$52/hr

Instrumentation and process control (level, flow, pressure, temperature) * Panel design collaboration and I/O validation * Start-up, commissioning, and production support Key Responsibilities

GHD

Senior Electrical Engineer

Waterloo, ON · Hybrid

Instrumentation and Control * Building services (lighting, security, etc.) * DC systems * Grounding * Equipment layouts * Completion and review of electrical design calculations. * Preparation of ...

Great Lakes Group

Be Seen First

Project Manager - Automation & Smart Manufacturing

Hamilton, ON · On-site

CA$38 - CA$50/hr

Monitor and control project baselines , ensuring alignment with scope, schedule, cost, and quality ... Strong knowledge of PLC systems , robotics , and industrial instrumentation * Proficiency in ...

CRH

Licensed Electrician - 442A or 309A

Milton, ON

Inspect and repair motor control centres (MCCs), switchgear, and transformers * Install and maintain wiring, conduits, cable trays, and instrumentation * Identify and resolve issues with motors, AC ...

Certified Group

Lab Analyst

Kitchener, ON · On-site

Perform sample analysis using assigned instrumentation, ensuring proper calibration, data accuracy, and compliance with QC requirements * Process and review analytical data using instrument software ...

next page

Showing results 1-20

All JobsInstrumentation Control JobsInstrumentation Control Jobs in Kitchener, ON

Instrumentation Control information

What are some common challenges faced by Instrumentation Control professionals, and how can they overcome them?

Instrumentation Control professionals often encounter challenges such as troubleshooting complex automated systems, keeping up with rapidly advancing technology, and ensuring system reliability under tight schedules. Successful professionals stay current with industry standards and new tools through continuous training and certifications. Collaborating closely with multidisciplinary teams—including engineers, maintenance staff, and IT personnel—helps in resolving issues efficiently and maintaining optimal system performance.

What does instrumentation and control do?

Instrumentation and control involve designing, installing, and maintaining systems that measure and regulate industrial processes, such as temperature, pressure, and flow. Professionals in this field work with sensors, controllers, and automation equipment to ensure safe and efficient operation of facilities like factories and power plants. Skills in troubleshooting, calibration, and understanding control systems are essential for this role.

What are the key skills and qualifications needed to thrive as an Instrumentation Control Technician, and why are they important?

To thrive as an Instrumentation Control Technician, you need a strong background in electronics, process control, and instrumentation, typically backed by a relevant technical diploma or degree. Familiarity with programmable logic controllers (PLCs), distributed control systems (DCS), and calibration tools is essential, and certifications like ISA Certified Control Systems Technician (CCST) are highly valued. Attention to detail, problem-solving abilities, and effective teamwork help technicians excel in troubleshooting and maintaining complex systems. These skills and qualifications are crucial for ensuring the safe, efficient, and reliable operation of automated industrial processes.

What is the difference between Instrumentation Control vs Instrumentation Technician?

AspectInstrumentation ControlInstrumentation Technician
CertificationsTypically requires certifications like Certified Control Systems Technician (CCST)Often holds similar certifications, including CCST or equivalent
Work EnvironmentDesign, programming, and troubleshooting control systems in industrial settingsInstall, maintain, and repair instrumentation equipment on-site
Job FocusSystem integration, control logic, and automationEquipment calibration, maintenance, and troubleshooting

Instrumentation Control professionals focus on designing and managing control systems and automation processes, while Instrumentation Technicians primarily handle installation, maintenance, and repair of instrumentation equipment. Both roles require similar certifications and often work together in industrial environments, but their core responsibilities differ in scope and focus.

Is instrumentation and control a good career?

Instrumentation and control is a stable career that involves designing, maintaining, and troubleshooting control systems used in manufacturing, energy, and industrial processes. It often requires technical skills, certifications, and knowledge of tools like PLCs and SCADA systems. The field offers opportunities for advancement and steady employment due to the ongoing need for automation and system optimization.

What are instrumentation control jobs?

Instrumentation control jobs involve designing, installing, maintaining, and troubleshooting instruments and control systems used to monitor and manage industrial processes. Professionals in this field ensure that equipment such as sensors, transmitters, and control valves function accurately and efficiently. These roles are critical in industries like manufacturing, oil and gas, power generation, and pharmaceuticals, where precise control of variables like temperature, pressure, and flow is essential for safety and productivity. Instrumentation control specialists may also work on integrating automated systems and ensuring compliance with safety standards.

Is instrumentation in high demand?

Instrumentation professionals are in high demand across industries such as manufacturing, oil and gas, and power generation due to the need for precise control and automation systems. Skills in calibration, troubleshooting, and familiarity with control systems like PLCs and SCADA increase employability in this field.

How much can a control and instrumentation engineer make?

Control and instrumentation engineers typically earn a median annual salary ranging from $70,000 to $110,000, depending on experience, location, and industry. Senior roles or those with specialized skills in PLCs, SCADA systems, or certifications can earn higher salaries, often exceeding $120,000 annually.
What cities near Kitchener, ON are hiring for Instrumentation Control jobs? Cities near Kitchener, ON with the most Instrumentation Control job openings:
Instrumentation Control jobs near you

Maintenance & Instrumentation

Air Liquide

Hamilton, ON

CA$49.09/hr

Full-time

Posted yesterday

New

Air Liquide rating

7.7

Company rating: 7.7 out of 10

Based on 33 frontline employees who took The Breakroom Quiz

49th of 100 rated chemical manufacturers

Job description

How will you CONTRIBUTE and GROW?At Air Liquide Canada, we are committed to building a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world.

Air Liquide is Hiring for a Maintenance & Instrumentation

  • Hourly Rate: $49.09

  • Location: Hamilton, ON

  • Job Type: Full-time

Job Summary:

The main object and purpose of this position consist in providing technical expertise and support for the production group, in the fields of instrumentation, control and analytical equipment, while promoting ALC's quality and safety objectives.

Key responsibilities:

  • Provides Instrumentation & Control support consisting of troubleshooting and repairing or replacing all types of Instruments in an Air Separation Unit and Steam Methane Reformer as well as peripheral equipment throughout the plants. Investigates problems reported, and either directly resolves the issue or guides the appropriate resources to find solutions to problems encountered. Complete PM's as required in computerized maintenance management system.

  • Document work performed in a computerized maintenance management system.

  • Assist with design of instrumentation related controls.

  • Maintain spare parts inventory for instrumentation and control systems.

  • Write standard work orders in the computerized maintenance management system.

  • Advises plant in equipment selection: Acquires and maintains knowledge of most recent technologies in the field of instrumentation, control and analytical equipment. Uses this knowledge to maintain equipment like: valves, transmitters, flow elements, analyzers, chromatographs, DCS systems, PLC systems, HMI interface systems, etc.

  • Sometimes is required to work with project teams to assist in loop checks and troubleshooting new equipment.

  • Operation of the site is 24/7 some off hour work is expected to facilitate repairs as quickly and safely as possible.

  • Shares information with plants: Reinforces the application of Air Liquide standards and procedures in plants. Uses different plants experience with different systems and equipment to share successful solutions with other plants.

  • Works on special projects: Participate in special projects as needed, initiated as part of Corporate or departmental objectives, and targeting safety, reliability or efficiency goals, in conjunction with production or project groups.

  • Quality/Safety: Actively promotes ALC safety and quality objectives. Knows and respects all procedures as indicated in the ALC Quality Manual. Makes sure the appropriate corrective and preventive measures are in place in order to answer customer complaints.

  • Process improvement: Works with his/her team as well as with cross-functional teams to continuously improve the work process. Continuously analyses the functioning of the activity, identifies causes of dysfunction and proposes corrective measures accordingly.

___________________Are you a MATCH?

Required qualifications:

  • Industrial Instrument Mechanic Trade Certification ( 447A ) required

  • 5 Years experience as an Instrumentation technician (Preferably in Continuous Production / Industrial Gas production plants)

  • Methodical diagnostic, calibration, repair, and PM on measurement instruments (pressure, temp, flow, level), gas analyzers, and chromatographs.

  • Proficiency in computerized instrumentation systems (PLC/DCS) and blueprint/P&ID reading.

Our Differences make our Performance


At Air Liquide, we are committed to build a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world.
We welcome and consider applications from all qualified applicants, regardless of their background. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world.

What Air Liquide employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply