ZipRecruiter

Log In

1

Injection Molding Jobs in Inman, SC (NOW HIRING)

Marchel Industries Inc.

Be Seen First

Injection Molding Process Technician

Spartanburg, SC · On-site

$55K - $65K/yr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Third Shift Injection Molding Process Technician/ Supervisor with a minimum of five years experience in the set up and start up of injection molding machines ranging from 33 to 1800 tons. Successful ...

Zobility

Injection Molding Process Technician

Fountain Inn, SC · On-site

$28 - $36/hr

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Responsible for all aspects of the injection molding process including, but not limited to, set-up and tear down, troubleshooting, equipment maintenance and work flow. * Working with production ...

Openwork, LLC

Injection Mold Technician

Inman, SC

$32/hr

  • Medical

  • Dental

  • Vision

In a Injection Mold Technician role, you'll be responsible for ... Operating molding machines * Setting up and sampling of modified molds What you'll need: * 3-5+ ...

Plasman

Mold Setter - 3rd Shift

Greer, SC

$17.25 - $20.50/hr

... injection molding department. * Properly load molds into the injection molding machines according to the work instructions while adhering to SMED principles. * Properly remove molds from the ...

IPS Corporation

Molding Technician

Spartanburg, SC · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Molding Technician About the Company: IPS Corporation is a global, market-leading provider of ... Must be able to hang, set, and start up tooling injection machines from beginning to end without ...

IPS Corporation

Molding Technician

Spartanburg, SC · On-site

  • Medical

  • Dental

  • Vision

  • Life

  • Retirement

  • PTO

Molding Technician About the Company: IPS Corporation is a global, market-leading provider of ... Must be able to hang, set, and start up tooling injection machines from beginning to end without ...

HiFyve

Maintenance Technician - 3rd Shift

Greer, SC

$32 - $40/hr

HiFyve is hiring a Maintenance Technician - Injection & Blow Molding in the plastics industry in Greer, SC! Salary: $32-$40/hr Shift: 3rd Shift (11:00 PM - 7:30 AM) Location: On-site - Greer, SC Job ...

next page

Showing results 1-20

All JobsInjection Molding JobsInjection Molding Jobs in Inman, SC

Injection Molding information

See Inman, SC salary details

$11

$21

$29

How much do injection molding jobs pay per hour?

As of Aug 16, 2026, the average hourly pay for injection molding in Inman, SC is $21.21, according to ZipRecruiter salary data. Most workers in this role earn between $17.98 and $24.13 per hour, depending on experience, location, and employer.

What are the key skills and qualifications needed to thrive as an injection molding technician, and why are they important?

To thrive as an Injection Molding Technician, you need a solid understanding of manufacturing processes, mechanical aptitude, and basic math skills, often supported by a high school diploma or relevant technical training. Familiarity with injection molding machines, quality control systems, and troubleshooting tools, as well as certifications like RJG or Paulson Training, is highly valuable. Attention to detail, problem-solving abilities, and effective communication set top performers apart in this role. These skills are crucial for maintaining product quality, minimizing downtime, and ensuring efficient, safe production operations.

What are some common challenges faced by injection molding technicians, and how can they be addressed on the job?

Injection molding technicians often encounter challenges such as material inconsistencies, machine malfunctions, and maintaining strict quality standards. Addressing these issues requires a strong understanding of machinery operation, attention to detail, and problem-solving skills. Collaborating closely with maintenance teams and quality control specialists helps resolve technical issues quickly and ensures production runs smoothly. Proactively performing regular equipment checks and staying updated on best practices can significantly minimize downtime and defects.

What skills are needed for injection molding?

Injection molding technicians need strong mechanical skills, attention to detail, and knowledge of machinery operation and maintenance. Familiarity with safety protocols, quality control, and the use of measurement tools like calipers is also important. Certifications in manufacturing or equipment operation can enhance job prospects.

Is injection molding a hard job?

Injection molding is a skilled manufacturing job that requires attention to detail, knowledge of machinery, and safety procedures. It can involve physical work and operating complex equipment, but with proper training and experience, it becomes manageable for many workers.

What is the difference between Injection Molding vs Mold Technician?

AspectInjection MoldingMold Technician
Primary RoleDesign, operate, and optimize plastic injection molding machinesMaintain, repair, and troubleshoot molds and molding equipment
Skills & CertificationsKnowledge of plastics, machinery operation, safety protocolsMechanical skills, mold maintenance certifications, troubleshooting
Work EnvironmentFactories, manufacturing plants with injection molding machinesManufacturing facilities, mold shops, production lines
Industry UsagePlastic manufacturing, automotive, packagingPlastic parts production, mold maintenance services

Injection Molding and Mold Technician roles are closely related in the plastics industry. Injection Molding focuses on operating and optimizing molding machines, while Mold Technicians specialize in maintaining and repairing molds. Both roles require mechanical knowledge and work in manufacturing environments, often overlapping in skills and industry applications.

What is injection molding?

Injection molding is a manufacturing process used to produce parts by injecting molten material into a mold. It is commonly used with plastics but can also be used with metals and other materials. The process involves melting the material, injecting it into a mold cavity, and then cooling it to create a solid part. Injection molding is widely used for mass production of complex and precise components, offering high efficiency and repeatability.

What is an injection molding job?

Injecting molding is the process of filling molds of different shapes and sizes with heated materials, such as plastic or rubber, to make components or a finished product according to specifications for a wide variety of uses, from airplane and car parts to toys to medical devices. Some of the jobs available in injection molding include machine operator, fabricator, molding line assistant, technician, and molding line operator. Generally, these jobs are split between the workers who set up and calibrate injection molding machines and those who operate the machines. Most injection molding jobs are in factories or manufacturing facilities.

More about Injection Molding jobs

What cities near Inman, SC are hiring for Injection Molding jobs?

Cities near Inman, SC with the most Injection Molding job openings:

Injection Molding jobs near you
Infographic showing various Injection Molding job openings in Inman, SC as of August 2026, with employment types broken down into 1% As Needed, 82% Full Time, 10% Part Time, 4% Contract, and 3% Nights. Highlights an 94% Physical, 2% Hybrid, and 4% Remote job distribution, with an average salary of $44,126 per year, or $21.2 per hour.

Injection Molding Process Technician

Marchel Industries Inc.

Spartanburg, SC • On-site

$55K - $65K/yr

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 5 days ago

Be Seen First

After you apply to this job, you can share why you’re interested to jump to the top of the candidate list.

Job description

Third Shift Injection Molding Process Technician/ Supervisor with a minimum of five years experience in the set up and start up of injection molding machines ranging from 33 to 1800 tons. Successful candidate will have experience with automotive and small multi cavity parts. Experience in ISO 9000 and IATF 16949 environment is a big plus for the successful candidate. Experience with a wide range of engineering materials and commodity materials is required. Training in RJG or Paulson injection molding processing would be a big plus.

Company Description

Injection Molding Company experiencing rapid growth with state of the art equipment. ISO Certified. Diverse customer base.