ZipRecruiter

Log In

1

In Process Inspector Jobs in Shelby, NC (NOW HIRING)

ProStaffing

Production Set Up Tech

Lincolnton, NC

$20 - $23.50/hr

Perform pre-run and in-process quality inspections * Complete production paperwork, inspection sheets, move tags, and coil tags * Verify the correct dies, cams, and tooling are available for each job

Industrial Fabricators

Quality Engineer

Gastonia, NC · On-site

$65K - $85K/yr

In this role, you will lead process inspections, drive root cause analysis, develop control plans, and ensure compliance with industry standards, including ISO 9001 and IATF 16949 . Key ...

IFab Corporation

Quality Engineer

Gastonia, NC · On-site

$60K - $78K/yr

In this role, you will lead process inspections, drive root cause analysis, develop control plans, and ensure compliance with industry standards, including ISO 9001 and IATF 16949 . Key ...

INA Solution Inc

Quality Engineer

York, SC · Remote

$80/hr

... in quality performance. Responsibilities * Develop and implement quality control plans based on product specifications and customer requirements. * Conduct product and process inspections, testing ...

IDEX

Machinist

Shelby, NC · On-site

$19.50 - $26.50/hr

Inspect own work-in-process with accepted procedures. * Make adjustments to tool and work offsets as necessary to maintain product quality. * Follow all safety rules and regulations. * Ability to ...

IDEX Corporation

Machinist

Shelby, NC · On-site

$19.50 - $26.50/hr

Inspect own work-in-process with accepted procedures. * Make adjustments to tool and work offsets as necessary to maintain product quality. * Follow all safety rules and regulations. * Ability to ...

IDEX Corporation

Machinist

Shelby, NC · On-site

$19.50 - $26.50/hr

Inspect own work-in-process with accepted procedures. * Make adjustments to tool and work offsets as necessary to maintain product quality. * Follow all safety rules and regulations. * Ability to ...

mlp

Engineering Technician 1

York, SC

Set up, adjust and operate machinery in support of the production process, as needed * Test and inspect machines to determine safe and efficient operation, perform routine maintenance and fix ...

mlp

Engineering Technician 1

York, SC

Set up, adjust and operate machinery in support of the production process, as needed * Test and inspect machines to determine safe and efficient operation, perform routine maintenance and fix ...

previous page

Showing results 41-60

All JobsIn Process Inspector JobsIn Process Inspector Jobs in Shelby, NC

In Process Inspector information

See Shelby, NC salary details

$23.2K

$52.1K

$93.9K

How much do in process inspector jobs pay per year?

As of Sep 7, 2026, the average yearly pay for in process inspector in Shelby, NC is $52,083.00, according to ZipRecruiter salary data. Most workers in this role earn between $36,500.00 and $60,200.00 per year, depending on experience, location, and employer.

What is an in process inspector?

In Process Inspectors are quality control professionals responsible for monitoring and evaluating products during various stages of the manufacturing process. Their main duties include inspecting materials, components, and assemblies to ensure they meet specified standards and identifying any defects or deviations. By detecting issues early, they help maintain product quality, reduce waste, and ensure compliance with industry regulations. In Process Inspectors typically use a variety of measuring tools and follow detailed checklists or quality protocols. Their work is essential for delivering reliable and safe products to customers.

What are the key skills and qualifications needed to thrive as an in process inspector?

To thrive as an In Process Inspector, you need a strong understanding of quality control, manufacturing processes, and attention to detail, typically supported by a high school diploma or technical certification. Familiarity with measurement tools, inspection equipment, and quality management systems like ISO standards is essential. Strong observational skills, effective communication, and problem-solving abilities help inspectors identify and address production issues efficiently. These skills ensure products meet quality standards, reduce defects, and maintain smooth production workflows.

What are the main challenges an in process inspector may face during daily inspections?

In Process Inspectors often encounter challenges such as maintaining attention to detail while inspecting repetitive parts, managing time efficiently to meet production deadlines, and ensuring clear communication with production teams when defects are found. Adapting to evolving quality standards and learning new inspection technologies can also be demanding. However, most companies provide ongoing training and encourage teamwork, which helps inspectors stay updated and resolve issues collaboratively.

What is the difference between In Process Inspector vs Quality Control Inspector?

AspectIn Process InspectorQuality Control Inspector
CertificationsOften requires inspection or quality assurance certificationsTypically requires similar certifications, such as ASQ certifications
Work EnvironmentInspects products during manufacturing process on the production lineInspects finished products or during various stages of production
Industry UsageCommonly used in manufacturing, aerospace, automotive industriesWidely used across manufacturing, electronics, and consumer goods sectors

In Process Inspectors focus on monitoring products during manufacturing to catch issues early, while Quality Control Inspectors often evaluate finished products to ensure they meet quality standards. Both roles require similar certifications and are integral to quality assurance in manufacturing industries.

What cities near Shelby, NC are hiring for In Process Inspector jobs?

Cities near Shelby, NC with the most In Process Inspector job openings:

In Process Inspector jobs near you

Production Set Up Tech

ProStaffing

Lincolnton, NC

$20 - $23.50/hr

Other

Posted 4 days ago

Job description

2nd shift Production Set-Up Technician / DIrect Hire
Hourly Pay: $20-$23.50
Hours: 3:15pm-3:15am M-Th (if OT is needed, 4 hours on Friday)
Location: Lincolnton
Industry: MFG

ProStaffing is currently recruiting for a Production Set-Up Technician for a manufacturing company in the area. This is a hands-on position for someone who is comfortable working with production equipment, completing machine set-ups, troubleshooting issues, and keeping production running safely and efficiently.

What You’ll Be Doing
  • Assist with machine and die set-ups, including die changes and knife installation/adjustments
  • Help troubleshoot production equipment and resolve line issues
  • Complete routine equipment inspections and lubrication
  • Move raw materials and finished product as needed
  • Coordinate material movement and storage with Material Handlers
  • Review work orders and make sure the correct material, processing, packaging, and customer specifications are followed
  • Record material weights, coil information, production quantities, and labor accurately
  • Perform pre-run and in-process quality inspections
  • Complete production paperwork, inspection sheets, move tags, and coil tags
  • Verify the correct dies, cams, and tooling are available for each job
  • Follow all required safety procedures, including LOTO and PPE requirements
  • Maintain a clean and organized work area
  • Participate in continuous improvement efforts
What We’re Looking For
  • High school diploma or GED
  • Forklift certification
  • Experience setting up and operating High Speed and/or General Fabrication Expanders
  • Understanding of ISO procedures and manufacturing work instructions
  • Ability to identify and select materials based on type and gauge
  • Comfortable using calipers, micrometers, and tape measures
  • Ability to take required production measurements, including thickness and dimensional measurements
  • Good communication skills and ability to work closely with production team members and supervisors
  • Ability to stand and walk throughout the shift and lift up to 40 lbs. without assistance
Ideal Candidate: Someone with a strong mechanical aptitude who enjoys hands-on manufacturing work, understands the importance of quality and safety, and is willing to jump in wherever needed to keep production moving.

#PSDH