1

Hot Rod Mechanic Jobs in Texas (NOW HIRING)

Operator, Furnace Loader

Denton, TX · On-site

$30 - $32.78/hr

... in the rod mill at a highly skilled level. Supports and completes duties within the mill areas ... Mechanically inclined with experience in furnace/melting type of environment Knowledge of hot mill ...

Operator, Furnace Loader

Denton, TX · On-site

$30 - $32.78/hr

... in the rod mill at a highly skilled level. Supports and completes duties within the mill areas ... Mechanically inclined with experience in furnace/melting type of environment Knowledge of hot mill ...

Carpenter

Andrews, TX

$21.25 - $28.75/hr

Our market spans all industries, and our service offerings include Critical Electrical, Mechanical ... Minimum Qualifications Required: * 2 years of form setting, rod-busting and concrete finishing ...

Carpenter

Andrews, TX · On-site

$21.25 - $28.75/hr

Our market spans all industries, and our service offerings include Critical Electrical, Mechanical ... Minimum Qualifications Required: * 2 years of form setting, rod-busting and concrete finishing ...

MECHANICAL Operates shop equipment (e.g., grinders, drills, saws, threaders, lathe, mill); starts ... WELDING Prepares surfaces; selects correct welding rod; cuts / welds (metals, stainless steel ...

MECHANICAL Operates shop equipment (e.g., grinders, drills, saws, threaders, lathe, mill); starts ... WELDING Prepares surfaces; selects correct welding rod; cuts / welds (metals, stainless steel ...

MECHANICAL Operates shop equipment (e.g., grinders, drills, saws, threaders, lathe, mill); starts ... WELDING Prepares surfaces; selects correct welding rod; cuts / welds (metals, stainless steel ...

MECHANICAL Operates shop equipment (e.g., grinders, drills, saws, threaders, lathe, mill); starts ... WELDING Prepares surfaces; selects correct welding rod; cuts / welds (metals, stainless steel ...

MECHANICAL Operates shop equipment (e.g., grinders, drills, saws, threaders, lathe, mill); starts ... WELDING Prepares surfaces; selects correct welding rod; cuts / welds (metals, stainless steel ...

Hot Rod Mechanic information

See Texas salary details

$11

$23

$34

How much do hot rod mechanic jobs pay per hour?

As of Sep 7, 2026, the average hourly pay for hot rod mechanic in Texas is $23.42, according to ZipRecruiter salary data. Most workers in this role earn between $18.61 and $26.88 per hour, depending on experience, location, and employer.

What is a hot rod mechanic?

Hot rod mechanics are specialized automotive technicians who build, modify, and repair high-performance vehicles known as hot rods. These classic or custom cars are often enhanced for increased speed, power, and distinctive style. Hot rod mechanics handle tasks such as engine upgrades, custom fabrication, suspension tuning, and bodywork. They combine mechanical expertise with creativity to deliver unique, high-performance automobiles tailored to client specifications.

What skills and qualifications are needed to thrive as a hot rod mechanic?

To thrive as a Hot Rod Mechanic, you need strong mechanical aptitude, automotive repair expertise, and a deep understanding of custom car builds, typically gained through vocational training or relevant certifications. Familiarity with specialized tools such as welders, fabrication equipment, and diagnostic systems is crucial for modifying and upgrading performance vehicles. Creativity, attention to detail, and strong problem-solving skills set standout mechanics apart in this niche field. These skills ensure the safe, high-performance, and visually impressive completion of custom hot rod projects.

What are some typical challenges hot rod mechanics face when customizing classic cars?

Hot Rod Mechanics often encounter challenges such as sourcing rare parts for vintage vehicles, integrating modern technology into older models without compromising their classic appeal, and ensuring all modifications comply with safety and regulatory standards. Working on custom projects also requires strong problem-solving skills, as unexpected issues can arise during fabrication or assembly. Collaboration with bodywork specialists, painters, and customers is essential to achieve the desired outcome and maintain high-quality craftsmanship.

What is the difference between Hot Rod Mechanic vs Car Mechanic?

AspectHot Rod MechanicCar Mechanic
CertificationsASE certifications, specialty in custom and performance workASE certifications, general automotive repair
Work EnvironmentCustom shops, performance garages, racing eventsDealerships, repair shops, service centers
Industry UsagePerformance, custom car building, racingGeneral automotive maintenance and repair

Hot Rod Mechanics specialize in custom, performance, and vintage vehicle modifications, often working in specialized shops or racing environments. Car Mechanics perform routine maintenance and repairs on everyday vehicles in general repair shops or dealerships. While both roles require automotive skills and certifications, Hot Rod Mechanics focus on high-performance and custom work, whereas Car Mechanics handle standard vehicle repairs.

What job categories do people searching Hot Rod Mechanic jobs in Texas look for?

The top searched job categories for Hot Rod Mechanic jobs in Texas are:

What cities in Texas are hiring for Hot Rod Mechanic jobs?

Cities in Texas with the most Hot Rod Mechanic job openings:

Infographic showing various Hot Rod Mechanic job openings in Texas as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution, with an average salary of $48,710 per year, or $23.4 per hour.

DPS - IOD - HVAC Mechanic III Facilities - 9816

CAPPS

Abilene, TX • On-site

$5.7K/mo

Full-time

Retirement

Re-posted yesterday


Job description

Job Description
This posting has been reopened. Those who have already applied need not reapply.
This fulltime position is on call seven (7) days a week & will be required to take the state issued laptop home. On call consists of rotation and will be required to respond anytime if requested.
PLEASE NOTE: All applications must contain complete job histories, which includes job title, dates of employment, name of employer, supervisor's name and phone number and a description of duties performed. If this information is not submitted, your application may be rejected because it is incomplete. Resumes do not take the place of this required information.
SUBMITTED THROUGH WORK IN TEXAS: Work In Texas (WIT) applicants must complete the supplemental questions to be considered for the posting. In order to complete the supplemental questions please go to CAPPS Recruit to register or login and access your profile. Go to CAPPS Recruit to Sign In: https://erphcmprd.cpa.texas.gov/psc/candidateportal/EMPLOYEE/HRMS/c/HRS_HRAM_FL.HRS_CG_SEARCH_FL.GBL?FOCUS=Applicant&
GENERAL DESCRIPTION: Performs advanced (seniorlevel) heating, ventilation, and air conditioning (HVAC) work. Work involves operation, maintenance, and repair of mechanical and electrical / DDC control systems and components of HVAC equipment including steam and hot water boilers, cooling towers, chillers, fan coil units and air handler units in medium and large buildings. Required to learn and apply the developing technology of microprocessor control systems as they are installed in the different facilities. Instruct, guide and supervise the work of other HVAC mechanics and contractors while maintaining a work team atmosphere in order to accomplish large and difficult maintenance or repair projects. Works under limited supervision, with moderate latitude for the use of initiative and independent judgment.
The following Military Occupational Specialty codes are generally applicable to this position.
https://hr.sao.texas.gov/Compensation/MilitaryCrosswalk/MOSC_Maintenance.pdf
Applicants must fully complete the summary of experience to determine if minimum qualifications are met.
ESSENTIAL DUTIES / RESPONSIBILITIES:
1. Overhaul, remove and replace, and/or repair air conditioning, heating and ventilation equipment (e.g., pumps, air compressors, steam and hot water boilers, DX systems, pneumatically controlled devices). Make necessary adjustments to parts and equipment to attain maximum equipment efficiency during operation.
2. Repair steam and hot water boilers, and all auxiliary steam and hot water equipment. Inspect and maintain proper steam pressure for all types of boilers, e.g., fire tube and water tube boilers, maintain proper water levels in boilers and associated equipment; read gauges and record indicated temperatures and pressures; take action to relieve excessive pressures or temperatures or to increase low pressure or temperatures. Monitor boiler water and chemicals and make adjustments to the equipment as needed.
3. Install or remove and replace electrical control wiring and high voltage wiring within the equipment. Remove and install damper motors, actuators, thermostats, humidistats, and all other associated equipment.
4. Monitor directdigitalcontrol (DDC) software unique to each piece of HVAC equipment to allow computer monitoring and remote adjustments for comfort and precision cooling and heating.
5. Perform scheduled preventive maintenance services on equipment (e.g., clean coils and rod tubes; change filters and belts; grease bearings; change motors, steam traps and valves, piping connections, fittings and couplings repair and replace compressors).
6. Test refrigeration equipment to determine if there are leaks and to locate and repair sources of recognized leaks. Adjust expansion valves and add refrigerant to air conditioning systems as needed.
7. Maintain records and prepare correspondence and reports (manual and computerized) related to work orders, repairs, installations, service, and Environmental Protection Agency (EPA) compliance. Monitor and adjust computerized plant systems.
8. Assist management in developing bid specifications related to HVAC and boiler equipment. Assist with the purchase of equipment and/or supplies to keep equipment operational, following Department purchasing requirements.
9. Attend special training sessions, read manuals, and question vendor representatives to learn the technology, capabilities, and limitations of new types of controls (e.g., microprocessor, pneumatic, DDC).
10. Travel to remote Department facilities, work hours beyond and other than normal work hours including holidays and weekends, and respond to offhours callins to accomplish assigned projects and respond to emergency malfunctions on HVAC equipment.
11. May inspect maintenance and repair work performed by others to verify that it meets quality standards.
12. Attend work regularly and observe approved work hours in accordance with agency leave and attendance policies.
13. Perform other duties as assigned.
GENERAL QUALIFICATIONS and REQUIREMENTS:
Education High school diploma or equivalent. Trade School degree or certification in HVAC is preferred.
Experience Minimum five (5) years¿ full time progressively responsible work experience operating, servicing, and repairing HVAC and boiler equipment in commercial or residential facilities (preferred) or comparable environments.
Licensure and/or Certification ACR Contractor license through Texas Department of Licensing and Regulation (TDLR) (HVAC Class A or B License) or possess an Associate's or Bachelor's degree in HVAC/R from an accredited institution. EPA 608 Type 3 or Universal certification required and/or obtained within six (6) months of employment. R410A Refrigerant certificate must be obtained within six (6) months of employment. If driving is required, must possess a valid driver license from state of residence.
Critical Organizational Infrastructure requirements This job may be responsible for conducting research on, working on, or having the ability to access critical organizational infrastructure; must be able to maintain the security and integrity of the infrastructure related to this role. Additionally, and more specifically, must not be employed by nor have any connection or continuous connections to any governmental entity or political apparatus of a country listed in 15 C.F.R. §791.4.
Regulatory knowledge Working knowledge of, or the ability to rapidly assimilate information related to TXDPS, State and Federal regulations, legislation, guidelines, policies and procedures.
Supervisory/Managerial/Leadership skills Knowledge of management/supervisory methods and principles, performance/productivity standards, and fiscal/budget management. Ability to develop plans, policies, and procedures for efficient workflow and overall effectiveness. Ability to provide clear direction to others, promote teamwork and motivate others to accomplish goals.
Technology Proficiency with Microsoft Office and appropriate levels of proficiency with utilized software and systems (e.g. CAPPS, SharePoint) and be able to learn new software/systems.
Interpersonal Skills Must demonstrate an ability to exercise poise, tact, diplomacy, and an ability to establish and maintain positive, working/professional relationships with internal/external customers. Must demonstrate DPS¿ core values: Integrity, Excellence, Accountability, and Teamwork.
Organizational and Prioritization Skills Must be organized, flexible, and able to effectively prioritize in a multidemand and constantly changing environment; able to meet multiple and sometimes conflicting deadlines without sacrificing accuracy, timeliness, or professionalism.
Presentation/Communication Skills Must be able to construct and deliver clear, concise, and professional presentations and/or communications to a variety of audiences and/or individuals.
Research and Comprehension Must demonstrate ability to quickly and efficiently access relevant information and be able to utilize and/or present research and conclusions in a clear and concise manner.
Analytical Reasoning/Attention to Detail Must demonstrate an ability to examine data/information, discern variations/similarities, and be able identify trends, relationships and causal factors, as well as grasp issues, draw accurate conclusions, and solve problems.
Confidentiality and Protected Information Must demonstrate an ability to responsibly handle sensitive and confidential information and situations and adhere to applicable laws/statutes/policies related to access, maintenance and dissemination of information.
Safety Must be able to work in safe manner at all times, avoiding shortcuts that have potential adverse results/risks, and must be able to comply with safety standards and best practices.
Schedule and Travel Availability for afterhours and weekend work is required. High frequency travel is required to remote locations.
PHYSICAL and/or ENVIRONMENTAL DEMANDS:
The physical and environmental demands described here are representative of those encountered and/or necessary for the employee to successfully perform the essential functions of this job; reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Environment: Indoors and outdoors, including small, confined and sometimes dirty and dimly lit spaces; and in heat or cold for extended periods of time including on a roof or in a mechanical room;
  • Ambulatory skills, e.g., stand, sit and work in awkward and various positions for extended periods of time; bend, stoop, climb or crawl in tight quarters; and climb and work from ladders or other overhead areas;
  • Handeye coordination and arm/hand/finger dexterity including ability to utilize fine motor skills and grasp of testing equipment and small tools/objects;
  • Ability to speak, hear, and exercise visual acuity;
  • Ability to lift, carry and/or transfer weights up to 100 pounds anticipated for this position;
  • Driving requirements: High frequency and ability to travel to remote locations.

State of Texas Benefits and Retirement Information: https://www.ers.texas.gov/
Current DPS employees who submit applications for posted DPS positions shall notify their immediate supervisor in writing.
A DPS employee who is selected for a position in the same salary group and state title as their current position will be transferred with no salary change.
A DPS employee who is selected for a position in their current salary group with a new state title may receive an increase of no more than 3.4% over their current salary regardless of posted salary.
Salary is contingent upon qualifications and is subject to salary administration and budgetary restrictions.
DUE TO THE HIGH VOLUME OF APPLICATIONS, WE DO NOT ACCEPT TELEPHONE CALLS. ONLY CANDIDATES SELECTED FOR INTERVIEW WILL BE CONTACTED.
State of Texas retirees may be rehired for fulltime, noncommissioned positions only under very specific circumstances.

CAPPS logo

About CAPPS

Sourced by ZipRecruiter

A statewide software solution developed by the Texas Department of Information Resources, CAPPS consolidates financial management, HR, and payroll operations for state agencies. Designed as a unified enterprise resource system, CAPPS replaced legacy tools in the early 2000s with a scalable, integrated platform tailored to agencies of varied size and complexity.

Industry

Human resource programs administration

Company size

10,000+ Employees

Headquarters location

Austin, TX, US