ZipRecruiter

Log In

1

Hatch Control System Engineer Jobs (NOW HIRING)

Trimble, Inc.

Control System Engineer

Westminster, CO · On-site

Core Experience: 5+ years of experience in control algorithm development for dynamic systems. * Education: Master's or PhD in Mechanical, Electrical, Aerospace, GNC, or a related engineering field ...

Marmon

Control System Engineer

Laurinburg, NC · On-site

What You'll Do The Control System Engineer is responsible for the design, development, testing, and continuous production support of control systems for end-of-line test equipment for hydraulic ...

Hitachi Energy

Control System Engineer

Raleigh, NC · On-site

Experience with PLC programming, HMI development, SCADA systems, industrial automation platforms, and control system integration. * Experience developing, configuring, or supporting software and user ...

New

PACCAR

Control System Engineer

Lewisville, TX · On-site

As a Control System Engineer, you will play a key role in the development and validation of next-generation powertrain control systems for advanced vehicle applications. You will guide system ...

PACCAR Inc

Control System Engineer

Lewisville, TX · On-site

As a Control System Engineer, you will play a key role in the development and validation of next-generation powertrain control systems for advanced vehicle applications. You will guide system ...

PACCAR

Control System Engineer

Lewisville, TX · On-site

As a Control System Engineer, you will play a key role in the development and validation of next-generation powertrain control systems for advanced vehicle applications. You will guide system ...

PACCAR

Control System Engineer

Lewisville, TX · On-site

As a Control System Engineer, you will play a key role in the development and validation of next-generation powertrain control systems for advanced vehicle applications. You will guide system ...

PACCAR

Control System Engineer

Lewisville, TX · On-site

As a Control System Engineer, you will play a key role in the development and validation of next-generation powertrain control systems for advanced vehicle applications. You will guide system ...

Clean Harbors

Control System Engineer

Deer Park, TX · On-site

We are seeking a Control System Engineer to join our Deer Park, TX team. As the DCS/PLC Engineer, you will be responsible for overseeing the design, commissioning, and operations of the control ...

previous pagenext page

Showing results 21-40

All JobsHatch Control System Engineer Jobs

Hatch Control System Engineer information

See salary details

$61K

$108.8K

$175.5K

How much do hatch control system engineer jobs pay per year?

As of Sep 14, 2026, the average yearly pay for hatch control system engineer in the United States is $108,776.00, according to ZipRecruiter salary data. Most workers in this role earn between $84,000.00 and $126,500.00 per year, depending on experience, location, and employer.

What are popular job titles related to Hatch Control System Engineer jobs?

For Hatch Control System Engineer jobs, the most frequently searched job titles are:

Control System Engineer

Johnson City, TN • On-site

Edgewater Technical Associates
Facilities Support Services • 201 - 500 employees
Learn more about Edgewater Technical Associatesexternal

Full-time

Medical, Dental, Vision, Life, Retirement, PTO

Re-posted 28 days ago

Key responsibilities

  • Support a large-scale industrial construction project by designing, programming, and commissioning control systems.

  • Develop control system architectures, industrial network layouts, and safety-related control systems.

  • Integrate and commission third-party equipment, including Fire Alarm Systems, Burner Management Systems, Heat Trace Controllers, and vendor-supplied HMIs.

Job description

Edgewater Technical Associates is seeking qualified candidates for a Control Systems Engineer opportunity in Johnson City, TN.
Position Overview:
The Control Systems Engineer will support a large-scale industrial construction project by designing, programming, and commissioning control systems for a greenfield process. This role requires extensive experience in Allen-Bradley PLC and HMI development for heavy industrial environments and strong knowledge of applicable codes and standards.
Key Responsibilities:
  • System Design & Development: Develop control system architectures and industrial network layouts.
  • Programming: Develop, test, and implement code for Allen-Bradley ControlLogix/GuardLogix (1756) PLCs using Studio 5000.
  • Safety Systems: Design and implement safety-related control systems using GuardLogix platforms in accordance with functional safety requirements.
  • HMI Development: Specify, configure, and implement FactoryTalk View SE/ME HMI applications for monitoring and control of process systems.
  • Networking: Configure and troubleshoot industrial communications networks including EtherNet/IP and Modbus RTU over RS-485, and OPC-based integrations.
  • Modeling & Simulation: Utilize simulation software to test and validate system behavior and performance prior to implementation.
  • Integration & Commissioning: Integrate and commission third-party equipment including Fire Alarm Systems, Burner Management Systems (BMS), Heat Trace Controllers, and vendor-supplied HMIs.
  • Documentation: Develop control narratives and interlock narratives in collaboration with Process Engineering.
  • Multidisciplinary Coordination: Work closely with electrical, instrumentation, mechanical, civil, structural, and process engineers to ensure integrated system design.
  • Design Support: Participate in design reviews, constructability reviews, and client meetings.
  • Field Support: Respond to RFIs, review submittals, and assist with installation issues during design, construction, and start-up.
  • Commissioning: Support Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and commissioning activities.
  • Configuration Management: Maintain accurate documentation and revision control throughout the project lifecycle.
  • Standards: Create internal company PLC standards and best practices.
  • Ensure control systems are safe, reliable, and compliant with applicable industry standards.

Qualifications:
  • Bachelor's degree in electrical engineering preferred, will consider experience in lieu of a degree.
  • 5+ years of Allen-Bradley PLC and HMI design and development in an industrial setting.
  • Strong understanding of applicable industry standards and electrical codes (NEC, NFPA, IEEE, etc.).
  • Ability to read and interpret engineering drawings, technical specifications, and vendor documentation.
  • Strong attention to detail and ability to manage multiple priorities in a fast-paced project environment.

Preferred Qualifications:
  • Professional Engineer (PE) license.
  • Experience working on large-scale industrial construction or EPC projects.
  • Experience supporting field construction or commissioning activities.

Other Job Requirements:
• United States Citizenship
If you are interested in being considered for this position and your resume clearly outlines your relevant experience for this position, please follow the application steps via our website: www.edgewatertech.net/careers
Edgewater will not submit your resume without first having detailed discussions with you and obtaining your permission to do so. We look forward to hearing from you!
WORKING WITH EDGEWATER TECHNICAL ASSOCIATES
Founded in 2003, Edgewater Technical Associates, LLC (Edgewater) is a New Mexico-based small business headquartered in Los Alamos, NM, with five (5) regional offices across the United States to locally support their growing presence at project sites. Edgewater has a proven track record and is a trusted provider of fixed-price construction projects, engineering, and technical services for the Department of Energy (DOE), Department of Defense (DOD), National Nuclear Regulatory Commission (NRC), Canadian Commercial Nuclear Industry, and private sector commercial contractors involved in nuclear, high-hazard, or complex operations. Edgewater's experience and guidance ensure that its customers perform hazardous operations, comply with regulatory requirements, and maintain the highest quality and safety standards.
Originally founded to support the Los Alamos National Laboratory, Edgewater now supports customers across the U.S. and Canada. Edgewater has five offices, with corporate headquarters in Los Alamos, NM and regional offices in Carlsbad, NM; Oak Ridge, TN; Aiken, SC; and Richland, WA.
Edgewater is committed to recruiting and maintaining a staff of highly skilled professionals to support our customers. In keeping with this objective, we offer highly competitive salaries and employee benefit packages structured to best suit your needs. We offer multiple individual and family benefit options including paid time off, medical, dental, life, vision, and disability insurance, and a pre- and post-tax 401 (k) retirement account with Company matching contributions and 100% vesting for eligible participants beginning DAY 1.
EQUAL OPPORTUNITY EMPLOYER
Edgewater is an equal opportunity employer and all qualified applicants will be considered for employment without regard to race, color, religion, sex, national origin, protected veterans, or individuals with disabilities in accordance with EO 14173.
View all Edgewater opportunities at www.edgewatertech.net/careers

Apply