ZipRecruiter

Log In

1

Grease Trap Driver Jobs in Minnesota (NOW HIRING)

All JobsGrease Trap Driver JobsGrease Trap Driver Jobs in Minnesota

Grease Trap Driver information

What does a grease trap driver do?

A Grease Trap Driver is responsible for removing and disposing of grease, oil, and food waste from grease traps in commercial kitchens and restaurants. They operate specialized vacuum trucks to pump out the contents, clean the traps, and safely transport the waste to approved disposal facilities. This job also involves maintaining equipment, following safety protocols, and keeping accurate service records to ensure compliance with environmental regulations.

What skills and qualifications are needed to be a grease trap driver?

To thrive as a Grease Trap Driver, you typically need a valid commercial driver's license (CDL), knowledge of safe waste handling procedures, and a good driving record. Familiarity with vacuum trucks, GPS navigation systems, and compliance with environmental regulations are also important. Strong attention to detail, reliability, and effective communication skills help ensure safe operations and good customer service. These skills and qualifications are essential for maintaining safety, environmental compliance, and customer satisfaction in this specialized waste management role.

What does a typical workday look like for a grease trap driver?

A typical day for a Grease Trap Driver involves a combination of driving to various client locations and performing on-site maintenance and cleaning of grease traps. Usually, drivers spend about half their time on the road and the other half servicing grease traps, which includes pumping, cleaning, and properly disposing of waste materials. The role requires attention to safety, environmental regulations, and customer service, as you'll often interact with restaurant and facility staff. Grease Trap Drivers usually work independently but coordinate closely with dispatchers and maintenance teams to manage schedules and respond to urgent service calls.

What is the difference between Grease Trap Driver vs Wastewater Technician?

AspectGrease Trap DriverWastewater Technician
CertificationsCommercial Driver's License (CDL), safety trainingEnvironmental certifications, safety training
Work EnvironmentDriving to client sites, collecting grease trapsInspecting, maintaining, and repairing wastewater systems
Industry UsageFood service, restaurant supportMunicipal, industrial wastewater management

The Grease Trap Driver primarily focuses on collecting and transporting grease from restaurants, requiring CDL and safety training. In contrast, Wastewater Technicians handle the inspection and maintenance of wastewater systems, often needing environmental certifications. While both roles involve working in the water treatment industry, the Grease Trap Driver's work is more transportation-focused, whereas Wastewater Technicians perform technical repairs and system management.

Do I need a license to clean grease traps?

Grease trap drivers typically need a valid commercial driver's license (CDL) or specialized waste removal license, depending on local regulations. Certification in hazardous waste handling and knowledge of environmental safety standards are often required for proper and legal operation. Requirements can vary by location, so checking local licensing authorities is recommended.

What are popular job titles related to Grease Trap Driver jobs in Minnesota?

For Grease Trap Driver jobs in Minnesota, the most frequently searched job titles are:

What job categories do people searching Grease Trap Driver jobs in Minnesota look for?

The top searched job categories for Grease Trap Driver jobs in Minnesota are:

Grease Trap Driver jobs near you
Infographic showing various Grease Trap Driver job openings in Minnesota as of August 2026, with employment types broken down into 100% Full Time. Highlights an 100% In-person job distribution.

Maintenance Engineer

Hilltop, MN • On-site

University of San Francisco
Colleges, Universities, and Professional Schools • 1 - 5K employees

7.8

Company rating: 7.8 out of 10

Based on 5 frontline employees who took The Breakroom Quiz

233rd of 627 rated colleges and universities

Good employer

Good training

Uninterrupted breaks

Learn more about University of San Franciscoexternal

$69.28/hr

Full-time

Re-posted 21 days ago

Job description

Job Title:

Maintenance Engineer

Job Summary:

ARTICLE 6 - DUTIES OF ENGINEERS
Section 1
The University and all engineers covered under this Agreement shall comply with all federal, state and University safety policies and directives. The Engineers covered by this Agreement shall, if and when called upon, perform any or all of the following skilled and technical duties, but not necessarily limited to performing work under a work order or computerized maintenance management system (CMMS), operating or assisting in operating all heating, ventilation, and air conditioning equipment, engines, turbines, motors, combustion engines, pumps, air compressors, ice and refrigerating machines, air conditioning units, filters, dryers, fans, siphons, also automatic and power-oiling pumps and engines, as well as other such normal or evolved building systems as installed within the building(s), more specifically described as follows:

Full Job Description:

  • Operation, maintenance and repair of all boilers, heaters, pumps, valves, appurtenances, engines, generators, and lines used in the distribution of steam and heated or processed water.
  • Operation, repair and maintenance of refrigerant compressors, condensers, evaporators, traps, transfer pumps, expansion valves, stop valves, and float valves, together with all refrigerant lines and devices used to control temperatures, and air conditioning systems in their entirety, including the use of approved recovery equipment and processes to comply with the law.
  • Operation, repair and maintenance of pumps handling brines, or other secondary refrigerating liquids together with all valves, appurtenances and lines in the system.
  • Operation, maintenance and repair of air compressors, together with distribution lines and all valves and devices for air control.
  • Operating, maintenance and repair of all natural and manufactured gas distribution lines, including all valves and control devices.
  • Operation, repair and maintenance of water filters, softeners, piping and pumps used in conjunction with water distribution, including all sinks and toilet bowls including supply lines, water lines, swimming pool chemical equipment and testing. An exception to these duties shall be the installation, operation, and maintenance of PVC ground irrigation lines up to the point of shut-off valve. However, electrical control devices shall remain in the control of the Engineering department.
  • Operation, repair and maintenance of all types of motors or engines used to power pumps, compressors and fans.
  • All electrical/control systems work and repair including circuit diagnostics, tracing and troubleshooting, operating, maintaining, and repairing all motor controls and related equipment drivers such as variable frequency drives (VFD's).
  • Tools considered as necessary to the fulfillment of the duties of the engineer shall include all those which may be required in the performance of his duties, including such types of special equipment necessary to operate, maintain and repair the equipment listed.
  • Operation, maintenance, and repair of all fuel oil systems including piping, pumps, valves, strainers, filters, floats, separators, lines, and controls.
  • Operation, maintenance and repair of building automation systems for HVAC, lighting, and other controlled mediums, including consoles, data gathering panels, remote sensors and indicating devices.
  • Operation, maintenance, and repair of sanitary sewer systems, sump pumps including basis and sumps, grease traps, water closets, urinals, flush valves, angle stops, and piping. This includes clearing blockages in fixtures and lines as needed and on a preventative basis as well.
  • Maintenance and repair of trash/recycling/composting/baling compactors, including electrical and hydraulic systems.
  • Maintenance and repair of all kitchen equipment.
  • Operation, maintenance, and repair of all life safety related equipment, including support of testing for life safety related equipment.
  • Inventory control for parts and materials required to perform such maintenance and repairs to the building systems.
  • Equipment room maintenance and repairs to maintain the physical condition and appearance of these rooms and equipment located within them.
  • Any and all work not specifically enumerated above, but which is customarily performed by maintenance engineers.
  • Repair and installation of locks, keys, hardware, doors and those duties related to locks.

Requirements:
Ability to safely lift 50 lbs; clean driving record and valid license. Available for any shift. Experience and ability to perform a variety of mechanical tasks preferred. Must possess the necessary physical and mental requirements to safely and efficiently perform the duties of the job.

Full-Time/Part-Time:

Full time

Pay Rate:

Hourly

Salary Range :

$69.28/hour

What University Of San Francisco employees say

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom

Apply