Offshore Paramedic (GOM)
Pasadena, TX · On-site
Inspections : * Perform daily 'walk-about' inspections of the site to ensure safe practices and identify hazards. * Review discrepancies with Operator and/or contractor representatives. * Observe ...
Pasadena, TX · On-site
Inspections : * Perform daily 'walk-about' inspections of the site to ensure safe practices and identify hazards. * Review discrepancies with Operator and/or contractor representatives. * Observe ...
Pasadena, TX · On-site
Inspections : * Perform daily 'walk-about' inspections of the site to ensure safe practices and identify hazards. * Review discrepancies with Operator and/or contractor representatives. * Observe ...
Pasadena, TX · On-site
Atmospheric Testing, Defensive Driving, Facility Inspection, Fall Protection, Fire Watch, Forklift Safety, HAZWOPER, HLO (Helicopter Landing Officer), Confined Space Rescue/High Angle Rescue, and ...
Pasadena, TX · On-site
Atmospheric Testing, Defensive Driving, Facility Inspection, Fall Protection, Fire Watch, Forklift Safety, HAZWOPER, HLO (Helicopter Landing Officer), Confined Space Rescue/High Angle Rescue, and ...
Pasadena, TX · On-site
Inspections:Perform daily 'walk-about' inspections of the site to ensure safe practices and identify hazards. Review discrepancies with Operator and/or contractor representatives. Observe work crews ...
Pasadena, TX · On-site
Inspections:Perform daily 'walk-about' inspections of the site to ensure safe practices and identify hazards. Review discrepancies with Operator and/or contractor representatives. Observe work crews ...
Irving, TX · On-site
Inspect (GOM ATOS) * Keyence * OGP Travel Requirements: * Up to 10% as needed (interstate travel to customer site in Oklahoma City) Thanks & Regards Zaheer Ahmed Lead- Associate Recruiting zahmed ...
Quick apply
Irving, TX · On-site
Inspect (GOM ATOS) * Keyence * OGP Travel Requirements: * Up to 10% as needed (interstate travel to customer site in Oklahoma City) Thanks & Regards Zaheer Ahmed Lead- Associate Recruiting zahmed ...
Fort Worth, TX · On-site
$64K - $83K/yr
As part of the Receiving and First Article Inspection team, the Quality Measurement Technician is ... GOM (e.g. ATOS Triple Scan). * Create measurement reports and analyze measurement results.
Fort Worth, TX · On-site
$64K - $83K/yr
As part of the Receiving and First Article Inspection team, the Quality Measurement Technician is ... GOM (e.g. ATOS Triple Scan). * Create measurement reports and analyze measurement results.
$64K - $83K/yr
As part of the Receiving and First Article Inspection team, the Quality Measurement Technician is ... GOM (e.g. ATOS Triple Scan). * Create measurement reports and analyze measurement results.
$64K - $83K/yr
As part of the Receiving and First Article Inspection team, the Quality Measurement Technician is ... GOM (e.g. ATOS Triple Scan). * Create measurement reports and analyze measurement results.
Fort Worth, TX · On-site
$64K - $83K/yr
As part of the Receiving and First Article Inspection team, the Quality Measurement Technician is ... GOM (e.g. ATOS Triple Scan). * Create measurement reports and analyze measurement results.
Quick apply
Fort Worth, TX · On-site
$64K - $83K/yr
As part of the Receiving and First Article Inspection team, the Quality Measurement Technician is ... GOM (e.g. ATOS Triple Scan). * Create measurement reports and analyze measurement results.
Plano, TX · On-site
$255K/yr
... including the GOM, FAA Ops Specs, and pilot duty/rest compliance * P&L and commercial ... Built FAA relationships yourself, through audits, inspections, and certificate matters * Driven ...
Posted today
Quick apply
Plano, TX · On-site
$255K/yr
... including the GOM, FAA Ops Specs, and pilot duty/rest compliance * P&L and commercial ... Built FAA relationships yourself, through audits, inspections, and certificate matters * Driven ...
Posted today
Austin, TX · On-site
$71K - $92K/yr
Develop, execute, and maintain inspection programs using CMM software platforms (e.g., DMIS, PC-DMIS, Calypso, Metrologic, Modus, MicroVU, GOM, Geomagic). * Be effectively with engineering and ...
Austin, TX · On-site
$71K - $92K/yr
Develop, execute, and maintain inspection programs using CMM software platforms (e.g., DMIS, PC-DMIS, Calypso, Metrologic, Modus, MicroVU, GOM, Geomagic). * Be effectively with engineering and ...
Austin, TX · On-site
$71K - $92K/yr
Develop, execute, and maintain inspection programs using CMM software platforms (e.g., DMIS, PC-DMIS, Calypso, Metrologic, Modus, Micro-VU, GOM, Geomagic). * Be effectively with engineering and ...
Austin, TX · On-site
$71K - $92K/yr
Develop, execute, and maintain inspection programs using CMM software platforms (e.g., DMIS, PC-DMIS, Calypso, Metrologic, Modus, Micro-VU, GOM, Geomagic). * Be effectively with engineering and ...
El Paso, TX · On-site
$26 - $34/hr
Support scheduled inspections involving avionics systems. * Perform modifications, upgrades, and ... Company General Operations Manual (GOM) * Aircraft Maintenance Manuals (AMM) and wiring diagrams
Quick apply
El Paso, TX · On-site
$26 - $34/hr
Support scheduled inspections involving avionics systems. * Perform modifications, upgrades, and ... Company General Operations Manual (GOM) * Aircraft Maintenance Manuals (AMM) and wiring diagrams
$14.60 is the 25th percentile. Wages below this are outliers.
$7.84 - $19.38
43% of jobs
The median wage is $21.99 / hr.
$19.38 - $30.93
32% of jobs
$30.93 - $42.47
10% of jobs
$42.47 - $54.01
1% of jobs
$54.01 - $65.56
0% of jobs
$65.56 - $77.10
0% of jobs
$77.10 - $88.65
0% of jobs
$88.65 - $100.19
0% of jobs
$100.19 - $111.73
0% of jobs
$111.73 - $123.28
1% of jobs
$123.28 - $134.82
13% of jobs
$7
$43
$134
| Aspect | Gom Inspect | Quality Control Inspector |
|---|---|---|
| Certifications | Typically requires knowledge of 3D metrology software and inspection standards | Often requires certifications like ASQ CQI or specific industry standards |
| Work Environment | Primarily software-based, working in offices or on-site for data collection | Hands-on inspection in manufacturing or production facilities |
| Industry Usage | Used across manufacturing, aerospace, automotive for digital inspection | Common in manufacturing, construction, and quality assurance roles |
Gom Inspect is a software tool used for 3D inspection and metrology, focusing on digital analysis. In contrast, a Quality Control Inspector performs physical inspections and uses various tools to ensure product quality. While Gom Inspect requires technical software skills, Quality Control Inspectors often need certifications and hands-on experience. Both roles are essential in manufacturing but serve different functions within the quality assurance process.
For Gom Inspect jobs in Texas, the most frequently searched job titles are:
The top searched job categories for Gom Inspect jobs in Texas are:
Full-time
Re-posted 13 days ago
Total Safety is looking for an Offshore Paramedic to add to their safety conscious team. The Offshore Paramedic responds to Emergency situations; staying within the requirements and restrictions of level of training at all times. Administers the best treatment and follow-up plan possible for all Emergency and Non-Emergency Medical situations as they arise. Assists in identifying hazards and assessing the risks and planning practical and effective solutions towards safe working practices in compliance with client’s standards.
About Total Safety
Total Safety is the world's premier provider of integrated safety and compliance services and the products necessary to support them, including gas detection, respiratory protection, safety training, fire protection, compliance and inspection, industrial hygiene, onsite emergency medical treatment/paramedics, communications systems, engineered systems design, and materials management. Our Core Values are People, Safety & Wellbeing, Accountability, Responsibility, Empowerment, Honesty, Transparency, and Integrity.
Medical: Responds to Emergencies; staying within the requirements and restrictions of level of training at all times. Administers the best treatment and follow-up plan possible for all Emergency and Non-Emergency Medical situations as they arise. Assists in identifying hazards and assessing the risks and planning practical and effective solutions towards safe
working practices in compliance with client’s standards.
Safety: Facilitate compliance with occupational health and safety standards and guidelines. Provide advice on measures to minimize hazards or unhealthy situations. Continuous monitoring for violations and potential hazards on location, or performing risk assessments. The required work will largely focus on prevention and risk assessments. The ideal candidate will also be detail oriented and ready to act in emergencies. The goal is to establish a safe workplace according to legal standards and foster a culture of attention to health and safety.
Essential Job Functions
Medical:
Safety:
Orientation of All Personnel Visiting the Site:
Review Operator/Contractor’s General Safety Rules.
Safety Meetings at the Site:
Job Safety Analysis:
Incidents and Incident Analysis:
Hazard Communication:
Inspections:
Environmental:
Qualifications
Experience: A minimum of two (2) year of experience working for an advanced life support EMS service, hospital, or US military. A minimum of one (1), preferred (2) years’ experience working in an industrial/offshore/remote setting fulfilling a medical and safety component. Previous experience working with OSHA and/or BSEE standards.
Medical Licenses and Certifications: Paramedic level certification, PHTLS (Pre Hospital Trauma Life Support) or ATLS (Advanced Trauma Life Support) and BLS (Basic Life Support). ITLS (International Trauma Life Support) preferred. CPR (Cardiopulmonary Resuscitation) and ACLS (Advanced Cardiac Life Support). Knowledge of laws concerning the safeguarding and disposing of classified medications.
Safety & Rescue Certifications: Atmospheric Testing, Defensive Driving, Facility Inspection, Fall Protection, Fire Watch, Forklift Safety, HAZWOPER, HLO (Helicopter Landing Officer), Confined Space Rescue/High Angle Rescue, and Certified Rigger/Competent Rigger, Certified First Aid / CPR Instructor. COSS, STS, or any other professional safety credentials considered a plus.
General Education: High school diploma / GED required, Associates Degree or higher college education considered a plus..
If offshore: HUET (Helicopter, Underwater Egress Training), Safe Gulf, USCG/MMS Rules & Regulations, May require TWIC™ card (Transportation Worker Identification Credential), DMT (Dive Medical Training) if required by customer.
Other Required Skills: Working knowledge of Microsoft Office, Excel, Outlook and other data base software. Ability to quickly learn new software applications utilized by company.
Must understand all applicable legal, moral and ethical issues surrounding emergency medical service. Possesses critical reasoning skills and is capable of applying them effectively in stressful situations.
Displays confidence and accepts the challenge and high degree of responsibility entailed in this position. Must possess leadership skills and display ability to direct others to assist as needed.
Demonstrates effective communication (verbal, written & listening) and interpersonal skills.
Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.
Initiative: Must have excellent judgment, be able to prioritize decisions and act quickly in the best interest of the patient. Self motivation is essential. Acts to prevent conditions from getting out of hand or to resolve an issue as they see fit and reports immediately. Communicates as required by Site Emergency Response Plan. Is preauthorized to cope with issues and then report the results of their actions right away.
Interpersonal Communications: Verbal communication and interpersonal skills are used constantly with the patient, other pre-hospital providers and hospital personnel, including physician medical directors. Must adapt to situations with may involve emotional instability and in multicultural settings. Shares opinions, ideas and resources with others to achieve common goals.
Complexity of Duties and Decisions: Functions at an optimum level in a non-structured environment that is constantly changing. Must remain calm while working in difficult and stressful situations, and stay focused while carrying out the functions of the position. Supervisor reviews progress versus detailed check for technical adequacy and conformance
with practice and policy.
Scope and Responsibility: Works independently and without direct supervision. May be responsible for supervising individuals or groups of medical providers. Acts as a mentor and provides guidance to less experienced staff. May assist with training, monitoring and coaching less experienced staff. Models and teaches compliance with all work practices,
policies and procedures.
Physical Demands
While performing the duties of this job, the employee is regularly required to stand; walk; and stoop, kneel, or crouch. Uses hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus. May be required to wear SCBA (self contained breathing apparatus). May be required to work hours beyond normal work schedule.
Work Environment
Combination of office and field / production environments. Some exposure to wet and/or humid conditions, outside and extreme weather conditions. Travel to and from customer sites. May encounter dangerous situations performing job including but not limited too explosions, high winds, hazardous atmosphere, bio-hazards, blood borne pathogens, high seas, and sub standard living conditions. May be required to fly in helicopters and fixed wing aircraft.
Reporting Relationships:
Complexity of Duties and Decisions: Functions at an optimum level in a non-structured environment that is constantly changing. Must remain calm while working in difficult and stressful situations, and stay focused while carrying out the functions of the position. Supervisor reviews progress versus detailed check for technical adequacy and conformance
with practice and policy.
Authority: Works independently and without direct supervision. May be responsible for supervising individuals or groups of medical providers. Acts as a mentor and provides guidance to less experienced staff. May assist with training, monitoring and coaching less experienced staff. Models and teaches compliance with all work practices, policies and procedures.
This job description is a general description of essential job functions. It is not intended as an employment contract, nor is it intended to describe all duties someone in this position may perform. All employees are expected to perform tasks as assigned by supervisory personnel, regardless of job title or routine job duties.
About Total Safety:
Total Safety is the world's premier provider of integrated safety and compliance services and the products necessary to support them, including gas detection, respiratory protection, safety training, fire protection, compliance and inspection, comprehensive flare services, industrial hygiene, onsite emergency medical treatment/paramedics, communications systems, engineered systems design, and materials management.
Total Safety operates from 176 locations in 20 countries to ensure the safe Wellbeing of Workers Worldwid...