1

Generator Inspector Jobs in Addison, IL (NOW HIRING)

Ability to perform emergency generator preventive maintenance inspection. 9.Install new phone lines or data lines using Cat5 wire as well as test phone lines for operation and tone. 10.Walls ...

... Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light ...

Operating Engineer

Northlake, IL

$67K - $91K/yr

... Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light ...

... generator installations, and more. We offer competitive compensation and robust benefits including ... Coordinate the final inspections of jobs as required. * Request COIs and surety bonds for permits ...

... generator installations, and more. We offer competitive compensation and robust benefits including ... Coordinate the final inspections of jobs as required. * Request COIs and surety bonds for permits ...

... generator installations, and more. We offer competitive compensation and robust benefits including ... Coordinate the final inspections of jobs as required. * Request COIs and surety bonds for permits ...

Chief Building Engineer

Chicago, IL · On-site

$84K - $104K/yr

Inspect and provide daily maintenance or supervision: * All facilities including offices, meeting ... Emergency generator system and fuel requirements as needed. * Identify any needed repairs or ...

next page

Showing results 1-20

Generator Inspector information

See Addison, IL salary details

$9

$22

$50

How much do generator inspector jobs pay per hour?

As of Jul 22, 2026, the average hourly pay for generator inspector in Addison, IL is $22.24, according to ZipRecruiter salary data. Most workers in this role earn between $15.43 and $24.81 per hour, depending on experience, location, and employer.

What does a Generator Inspector do?

A Generator Inspector is responsible for examining, testing, and maintaining electrical generators to ensure they operate safely and efficiently. Their duties typically include performing routine inspections, identifying wear or defects, conducting diagnostic tests, and ensuring compliance with industry standards and safety regulations. Generator Inspectors may work with various types of generators in settings such as power plants, industrial facilities, or commercial buildings. They also document their findings and recommend repairs or replacements as needed to prevent equipment failure and downtime.

What are some of the main challenges a Generator Inspector may encounter on the job, and how can they be addressed?

Generator Inspectors often face challenges such as accessing confined or hazardous spaces, interpreting complex technical data, and ensuring compliance with strict safety and regulatory standards. To address these issues, inspectors typically receive extensive safety training, use specialized inspection tools, and work closely with maintenance teams and engineers to accurately assess generator conditions. Effective communication and attention to detail are essential, as is staying updated on industry best practices to identify potential problems early and recommend corrective actions.

How long does it take to become a generator technician?

Becoming a generator technician typically requires completing a technical training program or apprenticeship that lasts from 6 months to 2 years. Gaining hands-on experience and obtaining relevant certifications, such as a generator or electrical license, can also be necessary to qualify for the role.

What is the main role of an electrical inspector?

A generator inspector, as an electrical inspector, is responsible for examining electrical systems and equipment to ensure they meet safety codes and standards. They perform inspections, identify hazards, and verify proper installation and maintenance, often using tools like test meters and requiring relevant certifications. Their work helps prevent electrical failures and ensures compliance with regulations.

What is the difference between Generator Inspector vs Generator Technician?

AspectGenerator InspectorGenerator Technician
CertificationsOften requires inspection and safety certificationsRequires technical certifications and repair licenses
Work EnvironmentPrimarily inspections at sites, testing, and compliance checksHands-on repairs, maintenance, and troubleshooting
Employer & Industry UsageUsed by inspection firms, construction, and power companiesEmployed by repair shops, power plants, and maintenance firms
Search & Comparison IntentPeople compare to understand inspection roles vs repair rolesPeople compare to understand repair vs inspection responsibilities

Generator Inspectors focus on evaluating generator safety, compliance, and performance through inspections, while Generator Technicians perform repairs, maintenance, and troubleshooting. Both roles require technical knowledge but differ in daily tasks and certifications.

What are the key skills and qualifications needed to thrive as a Generator Inspector, and why are they important?

To thrive as a Generator Inspector, you need a solid understanding of electrical systems, mechanical aptitude, and knowledge of safety regulations, often backed by a technical diploma or apprenticeship in electrical or mechanical fields. Familiarity with diagnostic tools, inspection checklists, and industry standards such as NFPA and OSHA is typically required. Attention to detail, problem-solving skills, and effective communication are vital soft skills in this role. These competencies ensure accurate assessments, compliance with safety protocols, and reliable operation of critical power systems.

Is being a generator technician worth it?

Generator technicians inspect, maintain, and repair generators, often working in industrial or construction environments. The job requires technical skills, certifications, and safety awareness, with opportunities for steady employment and advancement. Compensation varies by experience and location but generally offers a stable career path.

Do generators need to be inspected?

Generator inspectors are responsible for regularly inspecting generators to ensure they operate safely and efficiently. Inspections typically include checking for corrosion, leaks, proper fuel levels, and testing safety features, often following manufacturer guidelines and industry standards. Routine inspections help prevent failures and ensure compliance with safety regulations.
What job categories do people searching Generator Inspector jobs in Addison, IL look for? The top searched job categories for Generator Inspector jobs in Addison, IL are:
What cities near Addison, IL are hiring for Generator Inspector jobs? Cities near Addison, IL with the most Generator Inspector job openings:
[UNION] Operating Engineer

Full-time

Medical, Dental, Vision, Life, Retirement

Posted yesterday


Cushman & Wakefield rating

7.5

Company rating: 7.5 out of 10

Based on 154 frontline employees who took The Breakroom Quiz

83rd of 163 rated real estate companies


Job description

Job Title

[UNION] Operating Engineer

Job Description Summary

Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties

Job Description

ESSENTIAL FUNCTIONS AND RESPONSIBILITIES

Perform all plumbing, electrical, or HVAC requirements of the building(s)

Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.

Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings

Verify field conditions and perform any necessary repairs or adjustments Monitor Energy Management

Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property

Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)

Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.

Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris

Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management

Document and report activities to supervisor

Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns

Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits

Complete all required C&W Safety Training as scheduled annually

Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours

KEY COMPETENCIES

Technical Proficiency

Initiative

Flexibility

Multi-Tasking

Sense of Urgency

IMPORTANT EDUCATION

High School Diploma of GED Equivalent

Graduate of apprentice program or trade school preferred

IMPORTANT EXPERIENCE

5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting

ADDITIONAL ELIGIBILITY QUALIFICATIONS

Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)

May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements

Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)

Basic Computing Skills in Outlook, Excel & Word

Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.

Knowledgeable in energy management systems, techniques and operations.

Thorough knowledge in all building systems operations, maintenance and repair. May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties

WORK ENVIRONMENT

This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices

Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine

Involves movement between departments, floors, and properties to facilitate work

Ability to speak clearly so others can understand you

Ability to read and understand information presented orally and in writing

Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics

OTHER DUTIES

This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.


Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.
The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.
The company will not pay less than minimum wage for this role.
The compensation for the position is: $43.81 - $51.54Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or emailAccommodations@cushwake.com. Please refer to the job title and job location when you contact us.

INCO: "Cushman & Wakefield"

What Cushman & Wakefield employees say

Pay

Benefits

Hours and flexibility

Workplace

Get the full story on Breakroom